I currently have an Asus 4G-N16 router on our little boat in France,
it has a free.fr SIM in it and works pretty well.
However it doesn't do IPV6.
I currently have an Asus 4G-N16 router on our little boat in France,
it has a free.fr SIM in it and works pretty well.
However it doesn't do IPV6. Everything on the web (and Asus support)
tries to tell me that it can do IPV6 but it simply doesn't have the
IPV6 configuration tab that everyone says it ought to have. I suspect
this is 'AI confusion', searching for 'IPV6 on Asus 4G-N16' always
brings up the same, boring, Asus FAQ which is generic for all Asus
routers.
So, I'm looking for a reasonably inexpensive 4G (or ideally 5G but I
think it will be too expensive) router that **definitely** can provide
IPV6 support. All free.fr SIMs have IPV6 support so it should be
easy!
I don't need anything with loads of bandwidth, it's mostly just
supporting ssh connections.
Moving to IPV6 will make connecting **to** the Raspberry Pi on the
boat a whole lot easier.
Chris Green <cl@isbd.net> wrote:
I currently have an Asus 4G-N16 router on our little boat in France,
it has a free.fr SIM in it and works pretty well.
However it doesn't do IPV6. Everything on the web (and Asus support)
tries to tell me that it can do IPV6 but it simply doesn't have the
IPV6 configuration tab that everyone says it ought to have. I suspect
this is 'AI confusion', searching for 'IPV6 on Asus 4G-N16' always
brings up the same, boring, Asus FAQ which is generic for all Asus
routers.
So, I'm looking for a reasonably inexpensive 4G (or ideally 5G but I
think it will be too expensive) router that **definitely** can provide
IPV6 support. All free.fr SIMs have IPV6 support so it should be
easy!
I don't need anything with loads of bandwidth, it's mostly just
supporting ssh connections.
Moving to IPV6 will make connecting **to** the Raspberry Pi on the
boat a whole lot easier.
Have you looked at Raspberry Pi Connect? No need for IPv6
Chris Green <cl@isbd.net> wrote:
I currently have an Asus 4G-N16 router on our little boat in France,
it has a free.fr SIM in it and works pretty well.
However it doesn't do IPV6. Everything on the web (and Asus support)
tries to tell me that it can do IPV6 but it simply doesn't have the
IPV6 configuration tab that everyone says it ought to have. I suspect
this is 'AI confusion', searching for 'IPV6 on Asus 4G-N16' always
brings up the same, boring, Asus FAQ which is generic for all Asus
routers.
So, I'm looking for a reasonably inexpensive 4G (or ideally 5G but I
think it will be too expensive) router that **definitely** can provide
IPV6 support. All free.fr SIMs have IPV6 support so it should be
easy!
I don't need anything with loads of bandwidth, it's mostly just
supporting ssh connections.
Moving to IPV6 will make connecting **to** the Raspberry Pi on the
boat a whole lot easier.
Have you looked at Raspberry Pi Connect? No need for IPv6
In uk.telecom.broadband Tweed <usenet.tweed@gmail.com> wrote:
Chris Green <cl@isbd.net> wrote:I have just looked at Raspberry Pi Connect, i don't think it provides
I currently have an Asus 4G-N16 router on our little boat in France,
it has a free.fr SIM in it and works pretty well.
However it doesn't do IPV6. Everything on the web (and Asus support)
tries to tell me that it can do IPV6 but it simply doesn't have the
IPV6 configuration tab that everyone says it ought to have. I suspect
this is 'AI confusion', searching for 'IPV6 on Asus 4G-N16' always
brings up the same, boring, Asus FAQ which is generic for all Asus
routers.
So, I'm looking for a reasonably inexpensive 4G (or ideally 5G but I
think it will be too expensive) router that **definitely** can provide
IPV6 support. All free.fr SIMs have IPV6 support so it should be
easy!
I don't need anything with loads of bandwidth, it's mostly just
supporting ssh connections.
Moving to IPV6 will make connecting **to** the Raspberry Pi on the
boat a whole lot easier.
Have you looked at Raspberry Pi Connect? No need for IPv6
what I want, I also wonder if it will work with a Pi that's behind a
CGNAT connection.
Also, I specifically want to connect from command line (on a local
system here at home) to command line on the remote Pi. I need to be
able to do things like use rsync from one system to another.
Raspberry Pi Connect seems to need a browser at one end and that's not
what I'm after.
Thanks all the same, I may find a use for Raspberry Pi Connect for
other requirements.
Chris Green <cl@isbd.net> wrote:
In uk.telecom.broadband Tweed <usenet.tweed@gmail.com> wrote:
Chris Green <cl@isbd.net> wrote:I have just looked at Raspberry Pi Connect, i don't think it provides
I currently have an Asus 4G-N16 router on our little boat in France,
it has a free.fr SIM in it and works pretty well.
However it doesn't do IPV6. Everything on the web (and Asus support)
tries to tell me that it can do IPV6 but it simply doesn't have the
IPV6 configuration tab that everyone says it ought to have. I suspect >>> this is 'AI confusion', searching for 'IPV6 on Asus 4G-N16' always
brings up the same, boring, Asus FAQ which is generic for all Asus
routers.
So, I'm looking for a reasonably inexpensive 4G (or ideally 5G but I
think it will be too expensive) router that **definitely** can provide >>> IPV6 support. All free.fr SIMs have IPV6 support so it should be
easy!
I don't need anything with loads of bandwidth, it's mostly just
supporting ssh connections.
Moving to IPV6 will make connecting **to** the Raspberry Pi on the
boat a whole lot easier.
Have you looked at Raspberry Pi Connect? No need for IPv6
what I want, I also wonder if it will work with a Pi that's behind a
CGNAT connection.
Also, I specifically want to connect from command line (on a local
system here at home) to command line on the remote Pi. I need to be
able to do things like use rsync from one system to another.
Raspberry Pi Connect seems to need a browser at one end and that's not
what I'm after.
Thanks all the same, I may find a use for Raspberry Pi Connect for
other requirements.
IrCOve used it through CGNAT. Does your free.fr sim allow inbound connections on IPv6? ie no firewall in the way.
To answer your original question, have a look at the range of Teltonika cellular routers, eg RUT901.
Tweed <usenet.tweed@gmail.com> wrote:
Chris Green <cl@isbd.net> wrote:
In uk.telecom.broadband Tweed <usenet.tweed@gmail.com> wrote:
Chris Green <cl@isbd.net> wrote:I have just looked at Raspberry Pi Connect, i don't think it provides
I currently have an Asus 4G-N16 router on our little boat in France, >>>>> it has a free.fr SIM in it and works pretty well.
However it doesn't do IPV6. Everything on the web (and Asus support) >>>>> tries to tell me that it can do IPV6 but it simply doesn't have the
IPV6 configuration tab that everyone says it ought to have. I suspect >>>>> this is 'AI confusion', searching for 'IPV6 on Asus 4G-N16' always
brings up the same, boring, Asus FAQ which is generic for all Asus
routers.
So, I'm looking for a reasonably inexpensive 4G (or ideally 5G but I >>>>> think it will be too expensive) router that **definitely** can provide >>>>> IPV6 support. All free.fr SIMs have IPV6 support so it should be
easy!
I don't need anything with loads of bandwidth, it's mostly just
supporting ssh connections.
Moving to IPV6 will make connecting **to** the Raspberry Pi on the
boat a whole lot easier.
Have you looked at Raspberry Pi Connect? No need for IPv6
what I want, I also wonder if it will work with a Pi that's behind a
CGNAT connection.
Also, I specifically want to connect from command line (on a local
system here at home) to command line on the remote Pi. I need to be
able to do things like use rsync from one system to another.
Raspberry Pi Connect seems to need a browser at one end and that's not
what I'm after.
Thanks all the same, I may find a use for Raspberry Pi Connect for
other requirements.
IrCOve used it through CGNAT. Does your free.fr sim allow inbound connections
on IPv6? ie no firewall in the way.
There will be need to be **my** firewall in the way, but as far as I
can tell from the free.fr information their IPV6 implementation is
pretty open.
To answer your original question, have a look at the range of TeltonikaOK, thanks, second recommendation of them. They're not too pricey
cellular routers, eg RUT901.
either.
Having (as I said) looked at Raspberry Pi Connect the other comment I
would make is that it's a whole lot more complicated than simply
implementing IPV6 (so that I can traverse the CGNAT).
Once the remote Pi has IPV6 access everything works without any
mucking about or installing extra software. So, IMHO, IPV6 is much
simpler! :-)
In message <7t6p5m-mn242.ln1@q957.zbmc.eu>
Chris Green <cl@isbd.net> wrote:
Having (as I said) looked at Raspberry Pi Connect the other comment I
would make is that it's a whole lot more complicated than simply
implementing IPV6 (so that I can traverse the CGNAT).
Once the remote Pi has IPV6 access everything works without any
mucking about or installing extra software. So, IMHO, IPV6 is much
simpler! :-)
At last! Someone else understands that IPv6 brings real advantages.
I had begun to think I was the only one.
David
David Higton <dave@davehigton.me.uk> wrote:
At last! Someone else understands that IPv6 brings real advantages.
I had begun to think I was the only one.
If only all the uk mobile networks would support iti
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 59 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 02:19:33 |
| Calls: | 810 |
| Files: | 1,287 |
| D/L today: |
2 files (9,745K bytes) |
| Messages: | 200,610 |