• email problem

    From Graham J@nobody@nowhere.co.uk to uk.telecom.broadband on Fri Nov 6 17:09:06 2026
    From Newsgroup: uk.telecom.broadband

    Is anybody else seeing intermittent problems sending to addresses on outlook.com? I get bounce messages like this:

    host outlook-com.olc.protection.outlook.com [52.101.202.151]
    SMTP error from remote mail server after pipelined sending data block:
    550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth
    Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com 2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)
    --
    Graham J
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David Rance@david@SPAMOFF.invalid to uk.telecom.broadband on Fri Nov 6 17:37:24 2026
    From Newsgroup: uk.telecom.broadband

    On 06/11/2026 17:09, Graham J wrote:

    Is anybody else seeing intermittent problems sending to addresses on outlook.com?-a I get bounce messages like this:

    -a-a-a host outlook-com.olc.protection.outlook.com [52.101.202.151]
    -a-a-a SMTP error from remote mail server after pipelined sending data block:
    -a-a-a 550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com 2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)

    Yes, I had it about a month ago. It seems that my IP was blocked by
    Microsoft without any good reason. Like you my SPF, DKIM and DMARC were
    all set up correctly and I couldn't find my IP on any blacklist.

    After a bit of googling I found a form (I can't remember where I found
    it) where Microsoft invites people suffering this problem to complain. I
    did this and got a reply within 24 hours to say that the block had been
    lifted temporarily while they looked into it. The block was lifted but I didn't hear any more from them.

    I should say that it was gmail.com where my mail was bouncing but that's another server that Microsoft runs.

    David
    --
    David Rance writing from Caversham, Reading, UK


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jim Jackson@jj@franjam.org.uk to uk.telecom.broadband on Fri Nov 6 22:01:38 2026
    From Newsgroup: uk.telecom.broadband

    On 2026-11-06, Graham J <nobody@nowhere.co.uk> wrote:
    Is anybody else seeing intermittent problems sending to addresses on outlook.com? I get bounce messages like this:

    host outlook-com.olc.protection.outlook.com [52.101.202.151]
    SMTP error from remote mail server after pipelined sending data block:
    550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth
    Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com 2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)


    Are you sure the DMARC is there?

    I'm with Mythic Beasts and their status page says ...

    2026-11-06 15:08 - we've become aware that Microsoft have implemented a significant, unannounced change to their mail policy, and are now
    rejecting all mail that does not have a DMARC record. This issue affects
    mail sent to Hotmail, Outlook and other Microsoft services. If this
    affects your domain, then adding a DMARC DNS record (TXT record,
    hostname: "_dmarc", data "v=DMARC1;p=none") should fix the issue.

    I create the relevant _dmarc DNS txt record under my domain and email
    now gets through.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From J. P. Gilliver@G6JPG@255soft.uk to uk.telecom.broadband on Sat Nov 7 09:39:39 2026
    From Newsgroup: uk.telecom.broadband

    On 2026/11/6 22:1:38, Jim Jackson wrote:
    On 2026-11-06, Graham J <nobody@nowhere.co.uk> wrote:
    Is anybody else seeing intermittent problems sending to addresses on
    outlook.com? I get bounce messages like this:

    host outlook-com.olc.protection.outlook.com [52.101.202.151]
    SMTP error from remote mail server after pipelined sending data block: >> 550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth
    Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com
    2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)


    Are you sure the DMARC is there?

    I'm with Mythic Beasts and their status page says ...

    2026-11-06 15:08 - we've become aware that Microsoft have implemented a significant, unannounced change to their mail policy, and are now
    rejecting all mail that does not have a DMARC record. This issue affects mail sent to Hotmail, Outlook and other Microsoft services. If this
    affects your domain, then adding a DMARC DNS record (TXT record,
    hostname: "_dmarc", data "v=DMARC1;p=none") should fix the issue.

    I create the relevant _dmarc DNS txt record under my domain and email
    now gets through.

    This sort of complication seems to keep being raised - mainly my those
    like Microsoft and Google who want everyone to play with particular tools.

    I was going to ask - are most hosting companies making the addition of
    the relevant bit - a "DMARC record" in this case - easy? Or even
    automatic - but that raises the question, is there any situation where
    _having_ a DMARC record would be a _dis_advantage? (I have absolutely no
    idea what DMARC is. Nor, to be honest, any interest in finding out,
    unless I have to.)
    --
    J. P. Gilliver. UMRA: 1960/<1985 MB++G()ALIS-Ch++(p)Ar++T+H+Sh0!:`)DNAf

    ... woker than a Green Party voter sporting home-knitted tofu socks.
    - Kate B in UMRA, 2026-9-6
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jim Jackson@jj@franjam.org.uk to uk.telecom.broadband on Sat Nov 7 15:41:44 2026
    From Newsgroup: uk.telecom.broadband

    On 2026-11-07, J. P. Gilliver <G6JPG@255soft.uk> wrote:
    On 2026/11/6 22:1:38, Jim Jackson wrote:
    On 2026-11-06, Graham J <nobody@nowhere.co.uk> wrote:
    Is anybody else seeing intermittent problems sending to addresses on
    outlook.com? I get bounce messages like this:

    host outlook-com.olc.protection.outlook.com [52.101.202.151]
    SMTP error from remote mail server after pipelined sending data block: >>> 550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth
    Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com
    2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)


    Are you sure the DMARC is there?

    I'm with Mythic Beasts and their status page says ...

    2026-11-06 15:08 - we've become aware that Microsoft have implemented a
    significant, unannounced change to their mail policy, and are now
    rejecting all mail that does not have a DMARC record. This issue affects
    mail sent to Hotmail, Outlook and other Microsoft services. If this
    affects your domain, then adding a DMARC DNS record (TXT record,
    hostname: "_dmarc", data "v=DMARC1;p=none") should fix the issue.

    I create the relevant _dmarc DNS txt record under my domain and email
    now gets through.

    This sort of complication seems to keep being raised - mainly my those
    like Microsoft and Google who want everyone to play with particular tools.

    indeed - they believe they own the protocols.

    I was going to ask - are most hosting companies making the addition of
    the relevant bit - a "DMARC record" in this case - easy? Or even
    automatic - but that raises the question, is there any situation where _having_ a DMARC record would be a _dis_advantage? (I have absolutely no
    idea what DMARC is. Nor, to be honest, any interest in finding out,
    unless I have to.)

    MythicBeasts have a a facility to do spf and dkim all for you. I assume
    that now they will add this to there "setup" procedure.

    Like you I've little idea about dmarc. I'm afraid I just followed the
    advice and it seems to have worked.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Trolleybus@ken@birchanger.com to uk.telecom.broadband on Sun Nov 8 11:44:47 2026
    From Newsgroup: uk.telecom.broadband

    On Sat, 7 Nov 2026 09:39:39 +0000, "J. P. Gilliver" <G6JPG@255soft.uk>
    wrote:

    On 2026/11/6 22:1:38, Jim Jackson wrote:
    On 2026-11-06, Graham J <nobody@nowhere.co.uk> wrote:
    Is anybody else seeing intermittent problems sending to addresses on
    outlook.com? I get bounce messages like this:

    host outlook-com.olc.protection.outlook.com [52.101.202.151]
    SMTP error from remote mail server after pipelined sending data block: >>> 550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth
    Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com
    2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)


    Are you sure the DMARC is there?

    I'm with Mythic Beasts and their status page says ...

    2026-11-06 15:08 - we've become aware that Microsoft have implemented a
    significant, unannounced change to their mail policy, and are now
    rejecting all mail that does not have a DMARC record. This issue affects
    mail sent to Hotmail, Outlook and other Microsoft services. If this
    affects your domain, then adding a DMARC DNS record (TXT record,
    hostname: "_dmarc", data "v=DMARC1;p=none") should fix the issue.

    I create the relevant _dmarc DNS txt record under my domain and email
    now gets through.

    This sort of complication seems to keep being raised - mainly my those
    like Microsoft and Google who want everyone to play with particular tools.

    I was going to ask - are most hosting companies making the addition of
    the relevant bit - a "DMARC record" in this case - easy? Or even
    automatic - but that raises the question, is there any situation where >_having_ a DMARC record would be a _dis_advantage? (I have absolutely no
    idea what DMARC is. Nor, to be honest, any interest in finding out,
    unless I have to.)

    The ISPs I use and their cPanel and StackCP hosting systems make it
    very easy
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From J. P. Gilliver@G6JPG@255soft.uk to uk.telecom.broadband on Sun Nov 8 17:59:11 2026
    From Newsgroup: uk.telecom.broadband

    On 2026/11/8 11:44:47, Trolleybus wrote:
    On Sat, 7 Nov 2026 09:39:39 +0000, "J. P. Gilliver" <G6JPG@255soft.uk>
    wrote:
    []
    This sort of complication seems to keep being raised - mainly my those
    like Microsoft and Google who want everyone to play with particular tools. >>
    I was going to ask - are most hosting companies making the addition of
    the relevant bit - a "DMARC record" in this case - easy? Or even
    automatic - but that raises the question, is there any situation where
    _having_ a DMARC record would be a _dis_advantage? (I have absolutely no
    idea what DMARC is. Nor, to be honest, any interest in finding out,
    unless I have to.)

    The ISPs I use and their cPanel and StackCP hosting systems make it
    very easy

    OK; I had hoped that was the case. [For those who find cPanel easy to
    use, at least! :-) ]

    So that leaves the second half of my question: is there any situation
    where _having_ a "DMARC record" is a _dis_advantage?
    --
    J. P. Gilliver. UMRA: 1960/<1985 MB++G()ALIS-Ch++(p)Ar++T+H+Sh0!:`)DNAf
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to uk.telecom.broadband on Sun Nov 8 18:56:11 2026
    From Newsgroup: uk.telecom.broadband

    "J. P. Gilliver" wrote:

    So that leaves the second half of my question: is there any situation
    where _having_ a "DMARC record" is a _dis_advantage?

    A badly configured DMARC can.

    e.g. one use of DMARC is to effectively say, "my domain's SPF and/or
    DKIM config is good, if they indicate that something claiming to be from
    me is spoofed, then reject it".

    So if you have misplaced confidence in your own SPF/DKIM records then
    DMARC can get your mail binned, but the big players are tending to do
    that anyway ...



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Graham J@nobody@nowhere.co.uk to uk.telecom.broadband on Mon Nov 9 09:29:09 2026
    From Newsgroup: uk.telecom.broadband

    Jim Jackson wrote:
    On 2026-11-06, Graham J <nobody@nowhere.co.uk> wrote:
    Is anybody else seeing intermittent problems sending to addresses on
    outlook.com? I get bounce messages like this:

    host outlook-com.olc.protection.outlook.com [52.101.202.151]
    SMTP error from remote mail server after pipelined sending data block: >> 550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth
    Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com
    2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)


    Are you sure the DMARC is there?

    I'm with Mythic Beasts and their status page says ...

    2026-11-06 15:08 - we've become aware that Microsoft have implemented a significant, unannounced change to their mail policy, and are now
    rejecting all mail that does not have a DMARC record. This issue affects
    mail sent to Hotmail, Outlook and other Microsoft services. If this
    affects your domain, then adding a DMARC DNS record (TXT record,
    hostname: "_dmarc", data "v=DMARC1;p=none") should fix the issue.

    I create the relevant _dmarc DNS txt record under my domain and email
    now gets through.

    OP here.

    A more thorough check revealed that I had SPF & DKIM records but no
    DMARC record. Added one and all is well.

    My ISP is now preparing a script to add DMARC records for all his
    domains where he is authoritative for the DNS and there is no DMARC
    record already present.
    --
    Graham J
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David Rance@david@SPAMOFF.invalid to uk.telecom.broadband on Mon Nov 9 09:45:02 2026
    From Newsgroup: uk.telecom.broadband

    On 09/11/2026 09:29, Graham J wrote:
    Jim Jackson wrote:
    On 2026-11-06, Graham J <nobody@nowhere.co.uk> wrote:
    Is anybody else seeing intermittent problems sending to addresses on
    outlook.com?-a I get bounce messages like this:

    -a-a-a-a-a host outlook-com.olc.protection.outlook.com [52.101.202.151]
    -a-a-a-a-a SMTP error from remote mail server after pipelined sending data >>> block:
    -a-a-a-a-a 550 5.7.1 Message rejected: Message lacks SPF/DKIM/DMARC Auth >>> Records (AS9031519) [PH7PEPF0000000C.namprd04.prod.outlook.com
    2026-11-06T16:33:40.498Z 08DF3B18C71EC0E9]

    All the SPF/DKIM/DMARC are set up correctly and emails have been
    delivered to this recipient successfully until Wednesday (4/11/26)


    Are you sure the DMARC is there?

    I'm with Mythic Beasts and their status page says ...

    2026-11-06 15:08 - we've become aware that Microsoft have implemented a
    significant, unannounced change to their mail policy, and are now
    rejecting all mail that does not have a DMARC record. This issue affects
    mail sent to Hotmail, Outlook and other Microsoft services. If this
    affects your domain, then adding a DMARC DNS record (TXT record,
    hostname: "_dmarc", data "v=DMARC1;p=none") should fix the issue.

    I create the relevant _dmarc DNS txt record under my domain and email
    now gets through.

    OP here.

    A more thorough check revealed that I had SPF & DKIM records but no
    DMARC record.-a Added one and all is well.

    My ISP is now preparing a script to add DMARC records for all his
    domains where he is authoritative for the DNS and there is no DMARC
    record already present.

    When I had emails to gmail.com bouncing, I had an empty rua tag in my
    DMARC entry because I didn't want the constant aggregate reports. I'm
    not sure if it was the correction to the rua tag or my filling in a form
    to have the block lifted that actually had a positive effect.

    I write occasionally in this ng, and was, in fact, the first to reply in
    this thread, but I never get any acknowledgement that my replies have
    been seen. I don't mind if my replies aren't useful or worth replying to
    - that's fair enough - but I'd like to know if my posts are actually
    getting through.

    Thanks, David
    --
    David Rance writing from Caversham, Reading, UK


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.telecom.broadband on Mon Nov 9 10:03:34 2026
    From Newsgroup: uk.telecom.broadband

    David Rance <david@spamoff.invalid> wrote:
    When I had emails to gmail.com bouncing, I had an empty rua tag in my
    DMARC entry because I didn't want the constant aggregate reports. I'm
    not sure if it was the correction to the rua tag or my filling in a form
    to have the block lifted that actually had a positive effect.

    I write occasionally in this ng, and was, in fact, the first to reply in this thread, but I never get any acknowledgement that my replies have
    been seen. I don't mind if my replies aren't useful or worth replying to
    - that's fair enough - but I'd like to know if my posts are actually
    getting through.

    They are (both posts).

    I confess I didn't know DMARC could do reporting - RUA and RUF reports
    look useful.

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David Rance@david@SPAMOFF.invalid to uk.telecom.broadband on Mon Nov 9 10:43:44 2026
    From Newsgroup: uk.telecom.broadband

    On 09/11/2026 10:03, Theo wrote:

    David Rance <david@spamoff.invalid> wrote:

    When I had emails to gmail.com bouncing, I had an empty rua tag in my
    DMARC entry because I didn't want the constant aggregate reports. I'm
    not sure if it was the correction to the rua tag or my filling in a form
    to have the block lifted that actually had a positive effect.

    I write occasionally in this ng, and was, in fact, the first to reply in
    this thread, but I never get any acknowledgement that my replies have
    been seen. I don't mind if my replies aren't useful or worth replying to
    - that's fair enough - but I'd like to know if my posts are actually
    getting through.

    They are (both posts).

    Thanks, Theo, for setting my mind at rest.

    I confess I didn't know DMARC could do reporting - RUA and RUF reports
    look useful.

    I have ruf configured but rua brings too many reports, several per day.
    And I can't read them as I don't have gzip to open them. There's only
    one email server that sends it in a readily readable format but I've
    forgotten which one that is!

    I'll remove the entry for rua to see if Microsoft start blocking me again.

    David
    --
    David Rance writing from Caversham, Reading, UK


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to uk.telecom.broadband on Mon Nov 9 10:06:39 2026
    From Newsgroup: uk.telecom.broadband

    David Rance wrote:

    I write occasionally in this ng, and was, in fact, the first to reply in this thread, but I never get any acknowledgement that my replies have
    been seen. I don't mind if my replies aren't useful or worth replying to
    - that's fair enough - but I'd like to know if my posts are actually
    getting through.
    Yes, you're read here ...

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Graham J@nobody@nowhere.co.uk to uk.telecom.broadband on Mon Nov 9 12:26:55 2026
    From Newsgroup: uk.telecom.broadband

    David Rance wrote:

    [snip]


    I write occasionally in this ng, and was, in fact, the first to reply in this thread, but I never get any acknowledgement that my replies have
    been seen. I don't mind if my replies aren't useful or worth replying to
    - that's fair enough - but I'd like to know if my posts are actually
    getting through.

    Yes, I did see your initial reply, thanks.
    --
    Graham J
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Pancho@Pancho.Jones@protonmail.com to uk.telecom.broadband on Mon Nov 9 14:46:46 2026
    From Newsgroup: uk.telecom.broadband

    On 09/11/2026 10:43, David Rance wrote:
    On 09/11/2026 10:03, Theo wrote:

    David Rance <david@spamoff.invalid> wrote:

    When I had emails to gmail.com bouncing, I had an empty rua tag in my
    DMARC entry because I didn't want the constant aggregate reports. I'm
    not sure if it was the correction to the rua tag or my filling in a form >>> to have the block lifted that actually had a positive effect.

    I write occasionally in this ng, and was, in fact, the first to reply in >>> this thread, but I never get any acknowledgement that my replies have
    been seen. I don't mind if my replies aren't useful or worth replying to >>> - that's fair enough - but I'd like to know if my posts are actually
    getting through.

    They are (both posts).

    Thanks, Theo, for setting my mind at rest.

    I confess I didn't know DMARC could do reporting - RUA and RUF reports
    look useful.

    I have ruf configured but rua brings too many reports, several per day.
    And I can't read them as I don't have gzip to open them. There's only
    one email server that sends it in a readily readable format but I've forgotten which one that is!

    I'll remove the entry for rua to see if Microsoft start blocking me again.

    David


    I have both ruf and rua. I agree rua are too complicated to casually
    peruse, zipped, xml. It really needs an app to pull them off the mail
    server and convert them to a readable format.

    I don't think I've ever received a ruf, I couldn't find one.

    FWIW I got roundly slagged off in 2023, for failing to have set up
    dmarc, et al, and having my emails go directly to spam. I'm surprised
    people are only doing it now.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David Rance@david@SPAMOFF.invalid to uk.telecom.broadband on Tue Nov 10 11:39:12 2026
    From Newsgroup: uk.telecom.broadband

    David Rance wrote:


    I write occasionally in this ng, and was, in fact, the first to reply
    in this thread, but I never get any acknowledgement that my replies
    have been seen. I don't mind if my replies aren't useful or worth
    replying to - that's fair enough - but I'd like to know if my posts
    are actually getting through.

    Thanks to those who responded. I know now that things are working as
    they should.

    David
    --
    David Rance writing from Caversham, Reading, UK


    --- Synchronet 3.22a-Linux NewsLink 1.2