From Newsgroup: uk.rec.waterways

<div>Final option is to just delete your Eclipse installation (not your workspace), and re-extract a clean copy. Since Eclipse "installation" is just a zip/tar extraction, it's not hard to do. You would just need to re-install any third-party plugins that you already had and wanted to keep.</div><div></div><div></div><div></div><div></div><div></div><div>download pmd plugin for eclipse</div><div></div><div>Download: https://t.co/2I4et0LF8I </div><div></div><div></div><div>Backup everything before, because you might delete something that belongs to Eclipse. This will sometimes require that you run eclipse -clean from your command line/terminal to truly get rid of the plugin.</div><div></div><div></div><div>I am new to Maven, I have to install maven plugin in eclipse. I am facing some issues in the same, as the inputs I am getting different sites are not working.I have also gone through existing posts like this, which talks about running the command like :</div><div></div><div></div><div>I have written an Eclpise plugin (an Error Parser for the CDT), and it works just fine in the debugger version of eclipse. However I cannot for the life of me figure out how to install the plugin into eclipse. I can export the plugin as a jar file, and it seems to export without errors. I put the plugin jar file into eclipse\dropins and it is not loaded by eclipse. If I add it to the plugins directory, no luck. The features directory also seems to ignore my plugin.</div><div></div><div></div><div>Putting the plugin into the eclipse/plugins folder should work. If it doesn't, that usually means Eclipse has cached the plugins configuration for performance reasons. You can force Eclipse to rescan the plugins directory for changes by starting it with the -clean command-line argument.</div><div></div><div></div><div>The typical deployment mechanism for Eclipse is to use features. A feature includes plugins (in your case, probably just one), and can be installed through the Eclipse update manager. To deploy your plugin using a feature, you would do the following:</div><div></div><div></div><div></div><div></div><div></div><div></div><div>You should then be able to point the Eclipse update manager at the folder or URL containing the site.xml, and install your plugin that way. The advantage of this approach is you can upload the files to a website and deploy remotely.</div><div></div><div></div><div>there is a folder under the directory C:\eclipse\plugin just copy that .jar file and paste it into this folder before doing this close the eclipse IDE and open it again when u are done check the plugin effect</div><div></div><div></div><div>In our team we evaluated the EGit plugin extensively and found out that it is really buggy. In order to avoid all the headaches caused by the EGit plugin, I recommend Git Extensions. It is free and by far the best UI for repositories I had ever used. We combine it with Meld for a three-way-merge and it works fantasticly. You can still import your projects into Eclipse, but please never use EGit in order to keep your Git sources clean and working.</div><div></div><div></div><div>Maven projects typically have separate test source directories in the same project. The Eclipse convention, however, is to have a separate test bundle (often a fragment of the host/target plugin with the suffix ".tests"). Tycho introduces new eclipse-test-plugin packaging type to represent such projects. Build behavior is like regular Eclipse plugins, but these are treated specially at test-time.</div><div></div><div></div><div>org.eclipse.tycho:tycho-surefire-plugin:test mojo executes JUnit plug-in tests and it is bound to the integration-test build phase. Other than than, the tycho-surefire-plugin is similar to the standard maven-surefire-plugin, and it supports most of the parameters of the maven-surefire-plugin (see site doc for details). The tycho-surefire-plugin supports both headless and UI-based tests, but use of UI test harness has to be explicitly enabled, as follows:</div><div></div><div></div><div>The OSGi runtime for the test execution consists of the test bundle/fragment and its dependencies. If needed, you can add more features ("eclipse-feature"), bundles/fragments ("eclipse-plugin"), or installable units ("p2-installable-unit"), each including their transitive dependencies, to the test runtime. The recommended way to do this is to add an extraRequirements configuration to the target-platform-configuration (!) plugin. Example:</div><div></div><div></div><div>The packaging type eclipse-repository is used for aggregating content into a p2 repository (aka "update site"). It can also be used for building Eclipse/RCP application distributions. See Tycho/eclipse-repository for more information.</div><div></div><div></div><div>Note: the wiki was previously saying org.eclipse.equinox.executable.feature.group, however it seems that with version 1.1.0, ".feature.group" is already appended to the id, thus making build fails with a You requested to install 'org.eclipse.equinox.executable.feature.group.feature.group 3.6.0' but it could not be found.</div><div></div><div></div><div>Depending upon the particular version of Eclipse you are running with, the difficulty of uninstalling features or plugins from an Eclipse installation ranges from trivial to painful. In some cases, Eclipse doesn't support uninstalling certain 'optional' features after they have been installed.</div><div></div><div></div><div>There is no mechanism within Eclipse to permanently and physically uninstall a feature and its plug-ins. The process to physically and permanently remove an undesirable feature and its plug-ins is a manual process that should be done when Eclipse is not running. In order to do, you will have to manually remove the files there associated with the feature from the eclipse/features directory and its plug-ins from the eclipse/plugins directory. Be very cautious as to which files you delete, and always have a backup of your Eclipse directory. If you remove the wrong files from these directories, you may have quite some trouble restoring your Eclipse to a stable state. Therefore, unless your hard disk storage capacity is extraordinarily limited, it is recommended that you simply leave the physical files in place.</div><div></div><div></div><div>Note that when manually removing plugins as described above, it is likely that some metadata will still cached by Eclipse. This can lead to problems later on. Running Eclipse with the -clean option may help with that, as it causes Eclipse to clean the cached metadata. See the Running Eclipse help page for details about this option.</div><div></div><div></div><div>Under Helios/3.6/STS it's impossible to remove plug-ins or disable features. You can disable a few plugins at startup via "Window > Preferences" from the menu under "General > Startup and Shutdown". Uncheck the items you don't want to run when you start Eclipse. This needs to be done for every workspace. To remove a plug-in you need to remove the JAR file from the "plugins" directory, located in your Eclipse installation directory.</div><div></div><div></div><div>You are mistaken, kotlin eclipse plugin is still developed, it was abandoned for some time because of resources shortage (no spare developers), but the project is quite active since September 2018, developers from JetBrains recently started to incorporate my, now outdated, fix to new version of the plugin, I hope it will be merged eventually.</div><div></div><div></div><div>I understand it as that in connected mode the analysis fails because the java-plugin from sq-server loaded and used (sonar-java-plugin-7.13.0.29990.jar - which is no more java 8 compatible) versus in standalone mode the internally supplied java-plugin is used (sonar-java-plugin-7.3.0.27589.jar - which is java 8 compatible)</div><div></div><div></div><div>Helix Plugin for Eclipse (P4Eclipse) seamlessly brings developers the enterprise-class version control features they need without ever having to leave the Eclipse IDE. Download the plugin below to get started.</div><div></div><div></div><div>Double-click lombok.jar (downloadable from this site, or from your maven repository; it's the same jar). This starts the eclipse installer which will find eclipse (and eclipse variants as listed above), and offers to install lombok into these eclipse installations. The same tool can also uninstall lombok: </div><div></div><div></div><div></div><div></div><div>The SpotBugs Eclipse plugin allows SpotBugs to be used within the Eclipse IDE.The SpotBugs Eclipse plugin was generously contributed by Peter Friese.Phil Crosby and Andrey Loskutov contributed major improvements to the plugin.</div><div></div><div></div><div>The benefit of this solution is that for given (shared) Eclipse installation each team member has exactly same detectors set, and there is no need to configure anything anymore.The (really small) precondition is that you have to convert your existing detectors package to the valid Eclipse plugin. You can do this even for third-party detector packages.Another major differentiator is the ability to extend the default SpotBugs classpath at runtime with required third party libraries (see AddingDetectors.txt for more information).</div><div></div><div></div><div>With the JRebel plugin for the Eclipse IDE, Java developers can create groundbreaking and performant Java applications faster than ever before. Skip redeploys, trace request performance end-to-end -- even in distributed applications -- then assess the performance impact of your code change all without leaving the Eclipse IDE.</div><div></div><div></div><div>The JRebel Eclipse plugin brings the power of JRebel to one of the most popular IDEs in Java development. Take advantage of the benefits of the Eclipse IDE and JRebel for seamless integration and support.</div><div></div><div></div><div>On Eclipse Juno 4.2, installing the Oracle Java ME SDK plugins requires the Eclipse Mobile Tools for Java (MTJ) toolkit. The MTJ is not bundled with Juno and must be installed manually, before installing the Eclipse plugins.</div><div></div><div></div><div>If the org.eclipse.jetty.server version is higher than 6 you must prevent it from loading by changing its name so the JAR file is not parsed. Locate the file in the \plugins directory of your Juno installation and change the extension from .jar to something else.</div><div></div><div></div><div>Once you have installed the MTJ toolkit for Eclipse Juno 4.2, the procedure for installing the Oracle Java ME SDK plugins is the same as for Eclipse Indigo 3.7. See "Installing Plugins on Eclipse Indigo 3.7".</div><div></div><div></div><div>The outstanding feature of Oracle Java ME SDK is device emulation for the Connected LimitedDevice Configuration (CLDC). If the plugins are properly installed you see the Device Selector tab on the bottom left. If they are not visible, you can select Window > Show View > Device Selector.</div><div></div><div> df19127ead</div>
--- Synchronet 3.21d-Linux NewsLink 1.2