• Eclectic bikes

    From Clutterbug@clutterbug@andyburns.uk to uk.rec.sheds on Tue Oct 20 08:43:58 2026
    From Newsgroup: uk.rec.sheds

    My brother fancies an e-bike (not a sickraptor scooter)
    He lives in Plymouth wot is a bit hilly, and says he has a yard to
    charge it outdoors.

    How much is a reasonable amount to pay?

    Halfords rather than some back-street place to get reasonable quality?

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Kerr-Mudd, John@admin@127.0.0.1 to uk.rec.sheds on Tue Oct 20 10:35:18 2026
    From Newsgroup: uk.rec.sheds

    On Tue, 20 Oct 2026 08:43:58 +0100
    Clutterbug <clutterbug@andyburns.uk> wrote:

    My brother fancies an e-bike (not a sickraptor scooter)
    He lives in Plymouth wot is a bit hilly, and says he has a yard to
    charge it outdoors.

    How much is a reasonable amount to pay?

    Halfords rather than some back-street place to get reasonable quality?

    I wooden truss Halfrauds.
    I've not seen any yet in the Middle of Lidl, but who knows?
    My SO wants an eclectric Scooter - that is a Lambrettaish moped-type thing
    only leccy powered. Searching for scooter mostly gets those
    illegal hazardous stand-on ones that whizz past you on the pavement.
    --
    Bah, and indeed Humbug.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Abandoned Trolley@that.bloke@microsoft.com to uk.rec.sheds on Tue Oct 20 11:58:46 2026
    From Newsgroup: uk.rec.sheds

    On 20/10/2026 08:43, Clutterbug wrote:
    My brother fancies an e-bike (not a sickraptor scooter)
    He lives in Plymouth wot is a bit hilly, and says he has a yard to
    charge it outdoors.

    How much is a reasonable amount to pay?

    Halfords rather than some back-street place to get reasonable quality?



    You donrCOt say whether you already have a bike ?

    If you do then you could consider one of those clip on friction drive
    things - usually for the front wheel

    Alternatively there are hub conversion kits (usually) for the rear wheel
    which are not much different from the 32cc Cyclemaster which my dad rode before I was born - hopefully not quite so smelly though ?


    Either option would be hundreds less than a "real" e-bike
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From chrisnd@privacy.net@chrisnd@privacy.net to uk.rec.sheds on Tue Oct 20 14:45:28 2026
    From Newsgroup: uk.rec.sheds

    On 20/10/2026 11:58, Abandoned Trolley wrote:
    On 20/10/2026 08:43, Clutterbug wrote:
    My brother fancies an e-bike (not a sickraptor scooter)
    He lives in Plymouth wot is a bit hilly, and says he has a yard to
    charge it outdoors.

    How much is a reasonable amount to pay?

    Halfords rather than some back-street place to get reasonable quality?



    You donrCOt say whether you already have a bike ?

    If you do then you could consider one of those clip on friction drive
    things - usually for the front wheel

    Alternatively there are hub conversion kits (usually) for the rear wheel which are not much different from the 32cc Cyclemaster which my dad rode before I was born - hopefully not quite so smelly though ?

    I remember my dad having a cyclemaster.
    I also remember him selling it to someone who came to the door one day.
    Either way, it meant my dad had 'motorcycle' on his driving licence for
    the rest of his life - but never used that category again!


    Chris
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From hubops@hubops@ccanoemail.com to uk.rec.sheds on Tue Oct 20 09:47:11 2026
    From Newsgroup: uk.rec.sheds

    On Tue, 20 Oct 2026 08:43:58 +0100, Clutterbug
    <clutterbug@andyburns.uk> wrote:

    My brother fancies an e-bike (not a sickraptor scooter)
    He lives in Plymouth wot is a bit hilly, and says he has a yard to
    charge it outdoors.
    How much is a reasonable amount to pay?
    Halfords rather than some back-street place to get reasonable quality?



    Not to answer your question at all, but only to share my recent
    experience on e-bikes - more unsolicited opinions -
    .. just what this world needs .. :-( :-)
    Me & The Missus bought folding e-bikes a few years ago -
    at 65 years of agedness, for occasional recreational use,
    .. our peddle bikes were getting used less and less.
    We paid some extra due to buying them locally and assembled -
    rather than sight-unseen, unassembled, through the internet.
    We liked the folding models - they fit nicely in our Subaru hatchback
    albeit a little heavy for lifting in & out. They _are_ heavy !
    I'd _highly_ recommend a test-ride before buying -
    especially getting on & off for older folks.
    We bought the large-capacity batteries - bigger is better right ?
    .. nope - our recreational rides never use even 1/4 of the
    battery capacity - it's just added weight.
    Our bikes had a few premium features that we don't need or want
    like front fork suspension <added unnecessary weight> ;
    hydraulic brakes < I've had to bleed air a couple times>.
    I do like the fat tires - I wasn't sure about that before buying.
    As for fire hazards from charging - we were told to charge them
    and un-plug them - not leave them on charge continuously -
    Our son is a firefighter and says many of the fires are a result
    of people trying to "rescue" old batteries and re-building / modifying
    them or using the wrong charger.

    A couple of Canadian web sites for comparison or info :

    ours :
    https://wattbikes.ca/

    another more popular Canadian brand :

    https://radpowerbikes.ca/

    John T.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Clutterbug@clutterbug@andyburns.uk to uk.rec.sheds on Tue Oct 20 14:48:48 2026
    From Newsgroup: uk.rec.sheds

    "Kerr-Mudd, John" wrote:

    I wooden truss Halfrauds.

    I think he's gone to Evans

    I've not seen any yet in the Middle of Lidl, but who knows?
    My SO wants an eclectric Scooter - that is a Lambrettaish moped-type thing only leccy powered.

    I saw one of those, but it has no pedals, so sick raptor

    Searching for scooter mostly gets those
    illegal hazardous stand-on ones that whizz past you on the pavement.


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Clutterbug@clutterbug@andyburns.uk to uk.rec.sheds on Tue Oct 20 14:50:50 2026
    From Newsgroup: uk.rec.sheds

    Abandoned Trolley wrote:

    You donrCOt say whether you already have a bike ?

    Pretty sure he doesn't

    If you do then you could consider one of those clip on friction drive
    things - usually for the front wheel

    Alternatively there are hub conversion kits (usually) for the rear wheel which are not much different from the 32cc Cyclemaster which my dad rode before I was born - hopefully not quite so smelly though ?

    Doubt he has [m]any tools
    Either option would be hundreds less than a "real" e-bike

    He'll prolly get it nicked in fairly short ordure ...

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From hubops@hubops@ccanoemail.com to uk.rec.sheds on Tue Oct 20 09:51:01 2026
    From Newsgroup: uk.rec.sheds

    On Tue, 20 Oct 2026 10:35:18 +0100, "Kerr-Mudd, John"
    <admin@127.0.0.1> wrote:

    On Tue, 20 Oct 2026 08:43:58 +0100
    Clutterbug <clutterbug@andyburns.uk> wrote:

    My brother fancies an e-bike (not a sickraptor scooter)
    He lives in Plymouth wot is a bit hilly, and says he has a yard to
    charge it outdoors.

    How much is a reasonable amount to pay?

    Halfords rather than some back-street place to get reasonable quality?

    I wooden truss Halfrauds.
    I've not seen any yet in the Middle of Lidl, but who knows?
    My SO wants an eclectric Scooter - that is a Lambrettaish moped-type thing >only leccy powered. Searching for scooter mostly gets those
    illegal hazardous stand-on ones that whizz past you on the pavement.


    Here ya go :

    https://www.shorpy.com/node/7579

    John T.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Abandoned Trolley@that.bloke@microsoft.com to uk.rec.sheds on Tue Oct 20 14:55:52 2026
    From Newsgroup: uk.rec.sheds


    I remember my dad having a cyclemaster.
    I also remember him selling it to someone who came to the door one day. Either way, it meant my dad had 'motorcycle' on his driving licence for
    the rest of his life - but never used that category again!


    Chris


    Really ?

    Might have been for some other reason - I am fairly certain that the Cyclemaster would have been classified as a moped ?


    My father had a licence for just about everything, even though he never
    took a test.

    He got a licence before the driving test scheme was introduced
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John Williamson@johnwilliamson@btinternet.com to uk.rec.sheds on Tue Oct 20 15:07:27 2026
    From Newsgroup: uk.rec.sheds

    On 20/10/2026 14:48, Clutterbug wrote:
    "Kerr-Mudd, John" wrote:

    I wooden truss Halfrauds.

    I think he's gone to Evans

    I've not seen any yet in the Middle of Lidl, but who knows?
    My SO wants an eclectric Scooter - that is a Lambrettaish moped-type
    thing
    only leccy powered.

    I saw one of those, but it has no pedals, so sick raptor

    This is apparently road legal, but meeds a licence and in sewer ants,

    https://electricbikesupermarket.co.uk/collections/all-electric-motorcycles/products/super-soco-cux-electric-motorcycle
    --
    Tciao for Now!

    John.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From chrisnd@privacy.net@chrisnd@privacy.net to uk.rec.sheds on Tue Oct 20 15:22:14 2026
    From Newsgroup: uk.rec.sheds

    On 20/10/2026 14:55, Abandoned Trolley wrote:

    I remember my dad having a cyclemaster.
    I also remember him selling it to someone who came to the door one day.
    Either way, it meant my dad had 'motorcycle' on his driving licence
    for the rest of his life - but never used that category again!


    Chris


    Really ?

    Might have been for some other reason - I am fairly certain that the Cyclemaster would have been classified as a moped ?


    My father had a licence for just about everything, even though he never
    took a test.

    I think this sort of thing is why my dad had a motorcycle licence - not
    a moped one! - did mopeds even exist then as a category? (ie 1940s/50s?)
    He got a licence before the driving test scheme was introduced

    After to 2nd great horribleness, my dad got one driving once round an
    airfield :-)

    Chris
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Abandoned Trolley@that.bloke@microsoft.com to uk.rec.sheds on Tue Oct 20 15:27:33 2026
    From Newsgroup: uk.rec.sheds



    I think this sort of thing is why my dad had a motorcycle licence - not
    a moped one! - did mopeds even exist then as a category? (ie 1940s/50s?)
    He got a licence before the driving test scheme was introduced

    After to 2nd great horribleness, my dad got one driving once round an airfield :-)

    Chris


    Dunno when the moped classification was introduced (probably before
    Jasper Carrots Funky Moped ?) but I am fairly sure that something which
    could be propelled by its own pedals would NOT have been a motorcycle
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Clutterbug@clutterbug@andyburns.uk to uk.rec.sheds on Tue Oct 20 16:29:03 2026
    From Newsgroup: uk.rec.sheds

    John Williamson wrote:

    On 20/10/2026 14:48, Clutterbug wrote:
    "Kerr-Mudd, John" wrote:

    I wooden truss Halfrauds.

    I think he's gone to Evans

    I've not seen any yet in the Middle of Lidl, but who knows?
    My SO wants an eclectric Scooter - that is a Lambrettaish moped-type
    thing only leccy powered.

    I saw one of those, but it has no pedals, so sick raptor

    This is apparently road legal, but meeds a licence and in sewer ants,

    https://electricbikesupermarket.co.uk/collections/all-electric- motorcycles/products/super-soco-cux-electric-motorcycle
    Ah yes, it's not an electrically assisted pedal cycle but a lightweight electric motor cycle ...

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Sam Plusnet@not@home.com to uk.rec.sheds on Tue Oct 20 18:55:50 2026
    From Newsgroup: uk.rec.sheds

    On 20/10/2026 15:07, John Williamson wrote:
    On 20/10/2026 14:48, Clutterbug wrote:
    "Kerr-Mudd, John" wrote:

    I wooden truss Halfrauds.

    I think he's gone to Evans

    I've not seen any yet in the Middle of Lidl, but who knows?
    My SO wants an eclectric Scooter - that is a Lambrettaish moped-type
    thing
    only leccy powered.

    I saw one of those, but it has no pedals, so sick raptor

    This is apparently road legal, but meeds a licence and in sewer ants,

    https://electricbikesupermarket.co.uk/collections/all-electric- motorcycles/products/super-soco-cux-electric-motorcycle

    One of the first things I would want to know about something like that
    is "How much does it weigh?" - if it _is_ mentioned I've missed it.

    Second, can anyone tell me what this means
    "Climbing Capacity: 15"
    --
    Sam Plusnet
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Peter@myshed@prune.org.uk to uk.rec.sheds on Tue Oct 20 20:12:55 2026
    From Newsgroup: uk.rec.sheds

    "chrisnd@privacy.net" <chrisnd@privacy.net> wrote in news:njpbonFlapnU1 @mid.individual.net:


    After to 2nd great horribleness, my dad got one driving once round an airfield :-)


    Likewise. My dad drove a truck across the desert until Mr Rommel put a stop
    to that sort of thing. Dad ended up in an Italian POW camp. So he never
    took a test but had a licence to drive anything with wheels. He met my mum
    by driving into the front wall of her house on his motorcycle - fortunately she had trained as a nurse (he would never let me have a botormike).

    He taught me to drive in a situp-and-beg Ford Angular, but I couldn't pass
    the test until eventually I had 5 lessons from a driving school to get rid
    of all dad's bad habits. That was 60 years ago.
    --
    Peter
    -----
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.rec.sheds on Wed Oct 21 15:39:56 2026
    From Newsgroup: uk.rec.sheds

    Clutterbug <clutterbug@andyburns.uk> wrote:
    My brother fancies an e-bike (not a sickraptor scooter)
    He lives in Plymouth wot is a bit hilly, and says he has a yard to
    charge it outdoors.

    How much is a reasonable amount to pay?

    -u500 absolute minimum unless it's heavily discounted, probably more likely
    to find something decent in the -u500-1k territory.

    An ebike uses regular bike components plus ~-u300 for the electrics. If you spend -u500 on an ebike you're only getting -u200 of bike components, which is towards the bottom of the barrel in terms of quality.

    Halfords rather than some back-street place to get reasonable quality?

    Halfords can be a good option as they tend to have more of a range.
    Backstreet places are often franchised dealers for a particular brand and
    won't sell others.

    I don't know Evans, I think they're part of the Sports Direct empire. I
    tend to run away from anything they touch.

    'Branded' ebikes are often their own can of worms with proprietary
    components etc, same goes for bikes with Bosch/Panasonic/etc 'systems'.

    China turns out huge volumes of decent ebikes for low prices and their stuff
    is much more like a kit of Lego parts than the proprietary vendor lockin. Be careful buying Chinese ebike stuff from online marketplaces due to battery safety, but if you buy one online from a regular UK retailer then you should
    be ok. (China has new domestic battery safety rules, but not sure they've taken effect yet).

    OTOH the backstreet could be an option if buying used. They might be able
    to refurbish/re-cell/etc an older bike.

    For buying online, https://wooshbikes.co.uk/ are good for no-nonsense
    decent value options (been a few years since I looked at them).

    It's worth keeping an eye on sales as bikes go in model years, and last
    year's model can often be found discounted for cheap in the winter.
    eg keep an eye on:
    https://www.hotukdeals.com/search?q=ebike

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Clutterbug@clutterbug@andyburns.uk to uk.rec.sheds on Wed Oct 21 16:05:24 2026
    From Newsgroup: uk.rec.sheds

    Theo wrote:

    Clutterbug wrote:

    How much is a reasonable amount to pay?

    -u500 absolute minimum unless it's heavily discounted, probably more likely to find something decent in the -u500-1k territory.

    A grand initially sounded high to me, but that's what he started out
    thinking, and is what he ended up paying

    <https://evanscycles.com/brand/muddyfox/moto-electric-bike-930954>

    Looks a bit "weirdo" to me, but if he likes it ...

    An ebike uses regular bike components plus ~-u300 for the electrics. If you spend -u500 on an ebike you're only getting -u200 of bike components, which is
    towards the bottom of the barrel in terms of quality.
    I don't know Evans, I think they're part of the Sports Direct empire. I
    tend to run away from anything they touch.

    I think they were independent for a long time, then gobbled-up by Mike Wossname when facing bankruptcy, which is his M.O.

    For buying online, https://wooshbikes.co.uk/ are good for no-nonsense
    decent value options (been a few years since I looked at them).

    He doesn't do online, I could have ordered it for him, except he seemed
    to have woken up, decided he wanted an ebike and that he wanted it there
    and then ...

    Thanks.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From hubops@hubops@ccanoemail.com to uk.rec.sheds on Wed Oct 21 11:17:12 2026
    From Newsgroup: uk.rec.sheds



    <https://evanscycles.com/brand/muddyfox/moto-electric-bike-930954>



    Pedals optional ? :-)

    John T.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Clutterbug@clutterbug@andyburns.uk to uk.rec.sheds on Wed Oct 21 16:24:55 2026
    From Newsgroup: uk.rec.sheds

    hubops@ccanoemail.com wrote:

    <https://evanscycles.com/brand/muddyfox/moto-electric-bike-930954>

    Pedals optional ? :-)
    I've often seen them arrive with the pedals on the inside of the cranks ...

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From hubops@hubops@ccanoemail.com to uk.rec.sheds on Wed Oct 21 11:27:31 2026
    From Newsgroup: uk.rec.sheds



    <https://evanscycles.com/brand/muddyfox/moto-electric-bike-930954>

    Looks a bit "weirdo" to me, but if he likes it ...

    An ebike uses regular bike components plus ~u300 for the electrics. If you


    It looks to have no seat height adjustment ?
    Also - the battery is mounted up high - which would
    tend to make it top-heavy for getting on & off safely ?
    I didn't see anything in the specs for bike weight nor
    maximum rider weight.
    John T.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From hubops@hubops@ccanoemail.com to uk.rec.sheds on Wed Oct 21 11:30:46 2026
    From Newsgroup: uk.rec.sheds

    On Wed, 21 Oct 2026 16:24:55 +0100, Clutterbug
    <clutterbug@andyburns.uk> wrote:

    hubops@ccanoemail.com wrote:

    <https://evanscycles.com/brand/muddyfox/moto-electric-bike-930954>

    Pedals optional ? :-)


    I've often seen them arrive with the pedals on the inside of the cranks ...


    Yep - I just thought it funny that they didn't bother to put the
    pedals on for the web site photos. Duh.
    John T.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Kerr-Mudd, John@admin@127.0.0.1 to uk.rec.sheds on Wed Oct 21 21:22:47 2026
    From Newsgroup: uk.rec.sheds

    On Tue, 20 Oct 2026 15:07:27 +0100
    John Williamson <johnwilliamson@btinternet.com> wrote:
    On 20/10/2026 14:48, Clutterbug wrote:
    "Kerr-Mudd, John" wrote:

    I wooden truss Halfrauds.

    I think he's gone to Evans

    I've not seen any yet in the Middle of Lidl, but who knows?
    My SO wants an eclectric Scooter - that is a Lambrettaish moped-type
    thing
    only leccy powered.

    I saw one of those, but it has no pedals, so sick raptor

    This is apparently road legal, but meeds a licence and in sewer ants,

    https://electricbikesupermarket.co.uk/collections/all-electric-motorcycles/products/super-soco-cux-electric-motorcycle

    That'd do; but as others say - what does it weigh, and .. well a maybe a
    bit much on the uu.
    --
    Bah, and indeed Humbug.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.rec.sheds on Wed Oct 21 23:17:55 2026
    From Newsgroup: uk.rec.sheds

    Clutterbug <clutterbug@andyburns.uk> wrote:
    Theo wrote:

    Clutterbug wrote:

    How much is a reasonable amount to pay?

    -u500 absolute minimum unless it's heavily discounted, probably more likely to find something decent in the -u500-1k territory.

    A grand initially sounded high to me, but that's what he started out thinking, and is what he ended up paying

    <https://evanscycles.com/brand/muddyfox/moto-electric-bike-930954>

    Looks a bit "weirdo" to me, but if he likes it ...

    An ebike uses regular bike components plus ~-u300 for the electrics. If you
    spend -u500 on an ebike you're only getting -u200 of bike components, which is
    towards the bottom of the barrel in terms of quality.
    I don't know Evans, I think they're part of the Sports Direct empire. I
    tend to run away from anything they touch.

    I think they were independent for a long time, then gobbled-up by Mike Wossname when facing bankruptcy, which is his M.O.

    Hmm, the above bike looks peak Sports Direct. A brand from the past that everyone has forgotten about, something designed more for style than
    function. Spec looks fairly budget but ok. Battery is fairly generous
    which is something.

    -u1k feels a bit on the high side for that, perhaps as the full price without discounts. It's classic Sports Direct to quote a high 'original' price that it's allegedly knocked down from.

    But if it works ok and he likes it then that doesn't matter. It's not
    really a bike for travelling long distances though... those 20" wheels will
    get annoying, especially if you want to use it with power assist off.

    I've not come across Ananda motors before (Bafang is more common) but I
    found some positive comments about them.

    For buying online, https://wooshbikes.co.uk/ are good for no-nonsense decent value options (been a few years since I looked at them).

    He doesn't do online, I could have ordered it for him, except he seemed
    to have woken up, decided he wanted an ebike and that he wanted it there
    and then ...

    I can't help but think they saw him coming...

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Soup@spy@nosecrets.com to uk.rec.sheds on Sat Oct 31 14:50:32 2026
    From Newsgroup: uk.rec.sheds

    On 20/10/2026 11:58, Abandoned Trolley wrote:

    You donrCOt say whether you already have a bike ?

    If you do then you could consider one of those clip on friction drive
    things - usually for the front wheel

    Alternatively there are hub conversion kits (usually) for the rear wheel which are not much different from the 32cc Cyclemaster which my dad rode before I was born - hopefully not quite so smelly though ?
    I have an "ordinary" bike that I have converted with a hub conversion
    kit (on the front wheel). Approx -u600 for front wheel (with hub motor) controller and battery + price of original bike, so not that cheap .
    Being a conversion rather than a "real" e=bike means the battery is
    mounted on the handlebar meaning the whole contraption is top heavy and
    quite unwieldy .
    It does make the uphills easier but I wish I'd bit the bullet and
    got a proper e-bike.
    Mind you by the time you've paid for a decent e-bike (not a Temu
    knockoff) you could buy a cheap(ish) 2nd or 3rd or...hand car .
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Soup@spy@nosecrets.com to uk.rec.sheds on Sat Oct 31 15:08:09 2026
    From Newsgroup: uk.rec.sheds

    On 21/10/2026 16:24, Clutterbug wrote:
    hubops@ccanoemail.com wrote:

    <https://evanscycles.com/brand/muddyfox/moto-electric-bike-930954>

    I've often seen them arrive with the pedals on the inside of the cranks ...

    Bikes are often shipped with the pedals mounted the wrong way around to
    reduce width for shipping, normally when you buy from a bike shop they
    have moved them into the correct orientation but if you buy direct from
    the web... .
    It's fairly trivial to re=mount the pedals but with one caveat,
    when re-mounting pedals remember that one has a reverse thread so "
    righty loosey lefty tighty" .

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Clutterbug@clutterbug@andyburns.uk to uk.rec.sheds on Sat Oct 31 15:13:32 2026
    From Newsgroup: uk.rec.sheds


    Soup wrote:

    It's fairly trivial to re=mount the pedals but with one caveat, when re-mounting pedals remember that one has a reverse thread so " righty
    loosey lefty tighty" .

    The blade (or line spool) on my brush-cutter are like that, it b0rks my
    brain tightening them up ...
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John Williamson@johnwilliamson@btinternet.com to uk.rec.sheds on Sat Oct 31 15:59:50 2026
    From Newsgroup: uk.rec.sheds

    On 31/10/2026 15:13, Clutterbug wrote:

    Soup wrote:

    It's fairly trivial to re=mount the pedals but with one caveat, when
    re-mounting pedals remember that one has a reverse thread so " righty
    loosey lefty tighty" .

    The blade (or line spool) on my brush-cutter are like that, it b0rks my
    brain tightening them up ...

    The one that used to amuse me was watching someone trying to get the
    nearside wheel nuts off a lorry or bus in the 1970s.

    They had a left hand thread, while the off side wheelnuts had a right
    hand thread. I used to let them struggle for a while, then suggested
    they try tightening it first.. The expression on their face when the nut
    used to just fall off....

    (The reason was that before torque wrenches were common, as you drove,
    the nuts used to self tighten, whereas if they were both right hand
    threads, one side would work looser.)
    --
    Tciao for Now!

    John.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mike Spencer@mds@bogus.nodomain.nowhere to uk.rec.sheds on Sun Nov 1 01:31:36 2026
    From Newsgroup: uk.rec.sheds

    John Williamson <johnwilliamson@btinternet.com> writes:

    On 31/10/2026 15:13, Clutterbug wrote:

    Soup wrote:

    It's fairly trivial to re=mount the pedals but with one caveat, when
    re-mounting pedals remember that one has a reverse thread so " righty
    loosey lefty tighty" .

    The blade (or line spool) on my brush-cutter are like that, it b0rks my
    brain tightening them up ...

    The one that used to amuse me was watching someone trying to get the nearside wheel nuts off a lorry or bus in the 1970s.

    They had a left hand thread, while the off side wheelnuts had a right
    hand thread. I used to let them struggle for a while, then suggested
    they try tightening it first.. The expression on their face when the nut used to just fall off....

    (The reason was that before torque wrenches were common, as you drove,
    the nuts used to self tighten, whereas if they were both right hand
    threads, one side would work looser.)

    Around 70 years ago, my father and I were on our way to church (I
    forgey why my mother wasn't along that time) in our oldish Chrysler when
    we came to my best friend by the roadside. He was trying to change a
    flat on his mother's much newer Chrysler. When we stopped, he
    complained that he couldn't get the nuts off. My father, who had been
    driving Chryslers since 1935, explained about left hand thread on left
    wheels. Then all well with my much embarassed friend. Years later I
    was a mechanic in a shop that specialized in any make of car no one
    else would work on and became familiar with occasional left-hand
    threads among other Brit and Continental eccentricities.

    More amusing for u.r.s., in the 70s, I was working in a shop where we
    had a Jaguar in, right by the door but with the boot cover up so the
    pominent name "Jaguar" was hidden. An idler wandered in, gave the car
    a close scrute, then asked, "What year Undo is that?" Say what?

    Being unable to find a sign of marque, the idler had scrutinized the
    wheel hubs and had seen "Undo". Wire wheels with knock-off hubs were far
    from commonplace in HM Leftpondia at that point so our idler, eager to demonstrate his acuity, had deduced the make from the hub removal
    instructions. Instructions needed to help the unwary owner because
    the knock-off hubs were left hand thread on one side.
    --
    Mike Spencer Nova Scotia, Canada
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Julian Macassey@julian@n6are.com to uk.rec.sheds on Mon Nov 2 07:19:46 2026
    From Newsgroup: uk.rec.sheds

    On Sat, 31 Oct 2026 15:59:50 +0000, John Williamson <johnwilliamson@btinternet.com> wrote:
    They had a left hand thread, while the off side wheelnuts had a right
    hand thread. I used to let them struggle for a while, then suggested
    they try tightening it first.. The expression on their face when the nut used to just fall off....

    (The reason was that before torque wrenches were common, as you drove,
    the nuts used to self tighten, whereas if they were both right hand
    threads, one side would work looser.)

    Old racing/sport cars had a center nut you hit aith a
    hammer to loosen. They were supposed to self tighten as you drove
    and the trick was to know what side of the car you were dealing
    with.
    --
    The NHS will last as long as there are folk left with faith to
    fight for it. - Aneurin Bevan
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Abandoned Trolley@that.bloke@microsoft.com to uk.rec.sheds on Mon Nov 2 08:14:55 2026
    From Newsgroup: uk.rec.sheds


    Old racing/sport cars had a center nut you hit aith a
    hammer to loosen. They were supposed to self tighten as you drove
    and the trick was to know what side of the car you were dealing
    with.





    so do new racing cars
    --- Synchronet 3.22a-Linux NewsLink 1.2