• External PSU

    From Jeff Gaines@jgnewsid@outlook.com to uk.d-i-y on Mon Nov 16 09:03:19 2026
    From Newsgroup: uk.d-i-y


    I want to bring one of my Lenovo Tiny PCs back into service so grabbed it
    from the store room with what I thought was its PSU.

    It's not, despite having the right size barrel connector it only puts out
    12 V, not the 19/20 the Lenovo needs. Found a second supply with a barrel
    that also fits that is stamped "Lenovo" and that is 16 V.

    Looks like I have chucked out the correct one during a clear out, unusual
    for me, anyway replacement arrives today.

    I was surprised, I had worked on the basis that there were different sized barrels and if they fitted they would be the correct voltage, lucky it
    wasn't 50 V I suppose.

    Looks like I am wrong, is there a standard or do I need to read the
    minuscule War and Peace printed on these PSUs?
    --
    Jeff Gaines Dorset UK
    Are you confused about gender?
    Try milking a bull, you'll learn real quick.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to uk.d-i-y on Mon Nov 16 09:09:51 2026
    From Newsgroup: uk.d-i-y

    Jeff Gaines wrote:

    despite having the right size barrel connector it only puts out 12 V,
    not the 19/20 the Lenovo needs.

    is there a standard or do I need to read the
    minuscule War and Peace printed on these PSUs?

    No, it's a minefield of barrel diameters, voltages and polarities ...


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Joe@joe@jretrading.com to uk.d-i-y on Mon Nov 16 09:16:30 2026
    From Newsgroup: uk.d-i-y

    On 16 Nov 2026 09:03:19 GMT
    "Jeff Gaines" <jgnewsid@outlook.com> wrote:

    I want to bring one of my Lenovo Tiny PCs back into service so
    grabbed it from the store room with what I thought was its PSU.

    It's not, despite having the right size barrel connector it only puts
    out 12 V, not the 19/20 the Lenovo needs. Found a second supply with
    a barrel that also fits that is stamped "Lenovo" and that is 16 V.

    Looks like I have chucked out the correct one during a clear out,
    unusual for me, anyway replacement arrives today.

    I was surprised, I had worked on the basis that there were different
    sized barrels and if they fitted they would be the correct voltage,
    lucky it wasn't 50 V I suppose.

    Looks like I am wrong, is there a standard or do I need to read the minuscule War and Peace printed on these PSUs?


    No, there's no standard voltage for those wretched connectors, and two
    of them are close in size. Depending on the shrouding, it can be
    difficult to see whether one is 2.1mm or 2.5mm, so my toolbox contains
    a (labelled) 2.3mm nail.
    --
    Joe

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From The Natural Philosopher@tnp@invalid.invalid to uk.d-i-y on Mon Nov 16 11:20:11 2026
    From Newsgroup: uk.d-i-y

    On 16/11/2026 09:09, Andy Burns wrote:
    Jeff Gaines wrote:

    despite having the right size barrel connector it only puts out 12 V,
    not the 19/20 the Lenovo needs.
    is there a standard or do I need to read the minuscule War and Peace
    printed on these PSUs?

    No, it's a minefield of barrel diameters, voltages and polarities ...


    +1
    --
    "Socialist governments traditionally do make a financial mess. They
    always run out of other people's money. It's quite a characteristic of them"

    Margaret Thatcher

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to uk.d-i-y on Mon Nov 16 12:45:55 2026
    From Newsgroup: uk.d-i-y

    On 16/11/2026 11:20, The Natural Philosopher wrote:
    On 16/11/2026 09:09, Andy Burns wrote:
    Jeff Gaines wrote:

    despite having the right size barrel connector it only puts out 12 V,
    not the 19/20 the Lenovo needs.
    is there a standard or do I need to read the minuscule War and Peace
    printed on these PSUs?

    No, it's a minefield of barrel diameters, voltages and polarities ...


    +1

    Yes. I have just designed the input protection for a network router.
    Rated input 12V +/- 20%.
    Protection against +/-60V.
    Its just too easy to plug in a 52V PoE+ power supply instead of the
    intended 12V one when they have exactly the same connector.

    John

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John Rumm@see.my.signature@nowhere.null to uk.d-i-y on Mon Nov 16 15:30:59 2026
    From Newsgroup: uk.d-i-y

    On 16/11/2026 09:03, Jeff Gaines wrote:

    I want to bring one of my Lenovo Tiny PCs back into service so grabbed
    it from the store room with what I thought was its PSU.

    It's not, despite having the right size barrel connector it only puts
    out 12 V, not the 19/20 the Lenovo needs. Found a second supply with a barrel that also fits that is stamped "Lenovo" and that is 16 V.

    Looks like I have chucked out the correct one during a clear out,
    unusual for me, anyway replacement arrives today.

    I was surprised, I had worked on the basis that there were different
    sized barrels and if they fitted they would be the correct voltage,
    lucky it wasn't 50 V I suppose.

    Looks like I am wrong, is there a standard or do I need to read the minuscule War and Peace printed on these PSUs?


    Alas there is no standardisation of barrel or pin sizes on laptop /
    computer PSUs. 19V is very common for laptops, and many micro PCs. Some
    will run from a 45W adaptor, most will be happy with 65W, and a few
    high end gaming laptops might need 90W.

    You can also get universal supplies that come with a bunch of different connectors that you can choose from. However then you can get caught out
    by one with an uncommon barrel (often a Lenovo IME!)
    --
    Cheers,

    John.

    /=================================================================\
    | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------|
    | John Rumm - john(at)internode(dot)co(dot)uk | \=================================================================/
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From nib@news@ingram-bromley.co.uk to uk.d-i-y on Mon Nov 16 15:46:22 2026
    From Newsgroup: uk.d-i-y

    On 2026-11-16 12:45, John R Walliker wrote:
    On 16/11/2026 11:20, The Natural Philosopher wrote:
    On 16/11/2026 09:09, Andy Burns wrote:
    Jeff Gaines wrote:

    despite having the right size barrel connector it only puts out 12
    V, not the 19/20 the Lenovo needs.
    is there a standard or do I need to read the minuscule War and Peace
    printed on these PSUs?

    No, it's a minefield of barrel diameters, voltages and polarities ...


    +1

    Yes.-a I have just designed the input protection for a network router.
    Rated input 12V +/- 20%.
    Protection against +/-60V.
    Its just too easy to plug in a 52V PoE+ power supply instead of the
    intended 12V one when they have exactly the same connector.

    John

    +1 to that.

    I have two e-bikes, one with a 24V battery and one with a 36V.

    Their chargers are almost identical black boxes, with nothing to link
    them with a particular make of bike, with identical barrel connectors.

    nib

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.d-i-y on Mon Nov 16 15:51:03 2026
    From Newsgroup: uk.d-i-y

    John Rumm <see.my.signature@nowhere.null> wrote:
    Alas there is no standardisation of barrel or pin sizes on laptop /
    computer PSUs. 19V is very common for laptops, and many micro PCs. Some
    will run from a 45W adaptor, most will be happy with 65W, and a few
    high end gaming laptops might need 90W.

    You can also get universal supplies that come with a bunch of different connectors that you can choose from. However then you can get caught out
    by one with an uncommon barrel (often a Lenovo IME!)

    Many laptops made in the last 10 years can charge from USB-C - perhaps not
    at the full speed of the OEM power supply and/or fast charge the laptop when on, but enough to charge an off laptop or to slow the discharge of the
    battery when running.

    You can also buy dongles from USB-C to 5/9/12/15/20V barrels of various
    sizes. You need a fairly beefy charger (only the higher wattage chargers support the higher voltages, and most dongles are just requesting a given
    USB-C voltage not running their own power converter) but means you can use
    one charger plus a dongle which lives with the laptop. '19V' laptops are likely to be tolerant of a 20V input (20V is 19V+5% which is typically
    within spec).

    There are similar with PoE inputs too. Could maybe standardise on USB-C for portable things and PoE for networked things, then you just need USB-C
    and ethernet cables?

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.d-i-y on Mon Nov 16 15:59:30 2026
    From Newsgroup: uk.d-i-y

    nib <news@ingram-bromley.co.uk> wrote:
    I have two e-bikes, one with a 24V battery and one with a 36V.

    Their chargers are almost identical black boxes, with nothing to link
    them with a particular make of bike, with identical barrel connectors.

    That's a signficant cause of battery fires. Plug in 36V charger to 24V battery, dumb BMS isn't smart enough (or gets fried), battery gets hard overcharged, lets out the magic fire.

    Chinese standard GB 17761-2024 and similar in other countries now mandate
    comms between battery and charger and overvoltage protection. So should be avoidable in future. https://www.batterydesign.net/legislation-rules-and-regulations/gb-17761-2024/

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John Rumm@see.my.signature@nowhere.null to uk.d-i-y on Mon Nov 16 18:04:31 2026
    From Newsgroup: uk.d-i-y

    On 16/11/2026 15:51, Theo wrote:
    John Rumm <see.my.signature@nowhere.null> wrote:
    Alas there is no standardisation of barrel or pin sizes on laptop /
    computer PSUs. 19V is very common for laptops, and many micro PCs. Some
    will run from a 45W adaptor, most will be happy with 65W, and a few
    high end gaming laptops might need 90W.

    You can also get universal supplies that come with a bunch of different
    connectors that you can choose from. However then you can get caught out
    by one with an uncommon barrel (often a Lenovo IME!)

    Many laptops made in the last 10 years can charge from USB-C - perhaps not
    at the full speed of the OEM power supply and/or fast charge the laptop when on, but enough to charge an off laptop or to slow the discharge of the battery when running.

    It still seems a bit random as to what comes with new laptops - I would estimate more than half of the "business class" machines (i.e. decent cpu/ram/storage, but not much else in bells and whistles) I buy are
    still barrel jack style rather than USB C. The more premium ones are
    more likely to have USB-C now.

    You can also buy dongles from USB-C to 5/9/12/15/20V barrels of various sizes. You need a fairly beefy charger (only the higher wattage chargers support the higher voltages, and most dongles are just requesting a given USB-C voltage not running their own power converter) but means you can use one charger plus a dongle which lives with the laptop. '19V' laptops are likely to be tolerant of a 20V input (20V is 19V+5% which is typically
    within spec).

    There are similar with PoE inputs too. Could maybe standardise on USB-C for portable things and PoE for networked things, then you just need USB-C
    and ethernet cables?
    Depends on what you are powering... might have difficulty getting a
    laser printer running on PoE. (that and the trend for leaving Ethernet
    off many PCs altogether which is daft).
    --
    Cheers,

    John.

    /=================================================================\
    | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------|
    | John Rumm - john(at)internode(dot)co(dot)uk | \=================================================================/
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Layman@Jeff@invalid.invalid to uk.d-i-y on Mon Nov 16 18:09:45 2026
    From Newsgroup: uk.d-i-y

    On 16/11/2026 15:30, John Rumm wrote:


    Alas there is no standardisation of barrel or pin sizes on laptop /
    computer PSUs. 19V is very common for laptops, and many micro PCs. Some
    will run from a 45W adaptor, most will be happy with 65W, and a few
    high end gaming laptops might need 90W.

    My (now reserve) laptop is 12 years old and has a 180W brick - and it
    lives up to its name!
    --
    Jeff
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Sam Plusnet@not@home.com to uk.d-i-y on Mon Nov 16 19:09:10 2026
    From Newsgroup: uk.d-i-y

    On 16/11/2026 09:16, Joe wrote:
    On 16 Nov 2026 09:03:19 GMT
    "Jeff Gaines" <jgnewsid@outlook.com> wrote:

    I want to bring one of my Lenovo Tiny PCs back into service so
    grabbed it from the store room with what I thought was its PSU.

    It's not, despite having the right size barrel connector it only puts
    out 12 V, not the 19/20 the Lenovo needs. Found a second supply with
    a barrel that also fits that is stamped "Lenovo" and that is 16 V.

    Looks like I have chucked out the correct one during a clear out,
    unusual for me, anyway replacement arrives today.

    I was surprised, I had worked on the basis that there were different
    sized barrels and if they fitted they would be the correct voltage,
    lucky it wasn't 50 V I suppose.

    Looks like I am wrong, is there a standard or do I need to read the
    minuscule War and Peace printed on these PSUs?


    No, there's no standard voltage for those wretched connectors, and two
    of them are close in size. Depending on the shrouding, it can be
    difficult to see whether one is 2.1mm or 2.5mm, so my toolbox contains
    a (labelled) 2.3mm nail.

    No standard voltage, nor any complete agreement on polarity.
    Many are centre +ve, but not all.
    --
    Sam Plusnet
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Rod Speed@rod.speed.aaa@gmail.com to uk.d-i-y on Tue Nov 17 07:29:21 2026
    From Newsgroup: uk.d-i-y

    Andy Burns <usenet@andyburns.uk> wrote
    Jeff Gaines wrote

    despite having the right size barrel connector it only puts out 12 V,
    not the 19/20 the Lenovo needs. is there a standard or do I need to
    read the minuscule War and Peace printed on these PSUs?

    No, it's a minefield of barrel diameters, voltages and polarities ...

    That's why I have a database field for all hardware where
    I keep a photo of the label of the external PSU rating plate
    --- Synchronet 3.22a-Linux NewsLink 1.2