• Hard Water

    From Tricky Dicky@tricky.dicky@sky.com to uk.d-i-y on Wed Nov 11 09:38:02 2026
    From Newsgroup: uk.d-i-y


    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best approach,
    do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the crustiness that accumulated in the toilet cistern and having to replace the shower controls for the same reason I feel we need to do something to avoid future problems.

    Richard

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Charles Hope@clh@candehope.me.uk to uk.d-i-y on Wed Nov 11 10:30:02 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 09:38, Tricky Dicky wrote:

    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best approach,
    do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the crustiness that accumulated in the toilet cistern and having to replace the shower controls for the same reason I feel we need to do something to avoid future problems.

    Richard

    We've had various water softeners since we moved into this house 49
    years ago. Certainly a worthwhile investment
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From The Natural Philosopher@tnp@invalid.invalid to uk.d-i-y on Wed Nov 11 12:17:05 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 09:38, Tricky Dicky wrote:

    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best approach,
    do we go for filters or install a water softener?

    Watwe softener. Filters useless

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the crustiness that accumulated in the toilet cistern and having to replace the shower controls for the same reason I feel we need to do something to avoid future problems.

    Exactly. 25 years of softened water and I have very little scaling.
    FWIW I have a tapworks unit

    https://www.plumb2u.com/tapworks-11l-water-softener-inc-inst-kit-1-7-people-nsc11pro


    Richard

    --
    Gun Control: The law that ensures that only criminals have guns.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Davey@davey@example.invalid to uk.d-i-y on Wed Nov 11 12:26:15 2026
    From Newsgroup: uk.d-i-y

    On Wed, 11 Nov 26 10:30:02 UTC
    Charles Hope <clh@candehope.me.uk> wrote:

    On 11/11/2026 09:38, Tricky Dicky wrote:

    We recently moved into a hard water area and according to Yorkshire
    Water our water on average has 105.3mg/l of Calcium. With a planned
    kitchen refurb in the Spring sometime I am looking into what is the
    best approach, do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard
    water areas. There is no adverse taste to the water but after
    looking at the crustiness that accumulated in the toilet cistern
    and having to replace the shower controls for the same reason I
    feel we need to do something to avoid future problems.

    Richard

    We've had various water softeners since we moved into this house 49
    years ago. Certainly a worthwhile investment

    Totally in agreement here, in a Very Hard Water Area, East Anglia.
    Yorkshire would be considered a Soft Water Area for us.
    --
    Davey.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Chris Hogg@me@privacy.net to uk.d-i-y on Wed Nov 11 12:27:31 2026
    From Newsgroup: uk.d-i-y

    On Wed, 11 Nov 2026 09:38:02 -0000 (UTC), Tricky Dicky
    <tricky.dicky@sky.com> wrote:


    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best approach,
    do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the >crustiness that accumulated in the toilet cistern and having to replace the >shower controls for the same reason I feel we need to do something to avoid >future problems.

    Richard

    'Hardness' is a result of dissolved salts, calcium and to a lesser
    extent magnesium, in the water. A filter will achieve nothing. The
    salts will just pass straight through. You need a proper water
    softener system.
    --

    Chris
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From The Natural Philosopher@tnp@invalid.invalid to uk.d-i-y on Wed Nov 11 12:38:52 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 12:27, Chris Hogg wrote:
    On Wed, 11 Nov 2026 09:38:02 -0000 (UTC), Tricky Dicky <tricky.dicky@sky.com> wrote:


    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best approach, >> do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the
    crustiness that accumulated in the toilet cistern and having to replace the >> shower controls for the same reason I feel we need to do something to avoid >> future problems.

    Richard

    'Hardness' is a result of dissolved salts, calcium and to a lesser
    extent magnesium, in the water. A filter will achieve nothing. The
    salts will just pass straight through. You need a proper water
    softener system.

    +1
    --
    Religion is regarded by the common people as true, by the wise as
    foolish, and by the rulers as useful.

    (Seneca the Younger, 65 AD)


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Layman@Jeff@invalid.invalid to uk.d-i-y on Wed Nov 11 13:45:48 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 09:38, Tricky Dicky wrote:

    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best approach,
    do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the crustiness that accumulated in the toilet cistern and having to replace the shower controls for the same reason I feel we need to do something to avoid future problems.

    According to our water supplier, the hardness in our area is 116mg/l of calcium. Note that if you use other online hardness checkers you might
    get slightly different figures.
    <https://mytapwater.co.uk/>: 289.7 mg/l CaCOrea
    <https://waterhard.uk/>: 250 ppm (not otherwise specified) <https://filterflair.co.uk/pages/uk-water-hardness-map>: 292 ppm calcium carbonate
    <https://www.tapwater.uk/guides/water-hardness-map>: 276 mg of limescale minerals
    (Note that 40% of calcium carbonate is calcium)

    We've been here over 15 years and although the limescale is unsightly,
    and, by the way, is unfortunately a much better substrate for mould than porcelain, I've never felt the need for a water softener. Fairly regular
    use of a limescale remover is sufficient (citric acid crystals are
    probably the cheapest and are very effective as a hot saturated
    solution). We have never suffered any physical damage from limescale,
    such as blocked pipes.

    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost
    of a water softener, and recurring cost for softening salts, I have no idea.
    --
    Jeff
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From The Natural Philosopher@tnp@invalid.invalid to uk.d-i-y on Wed Nov 11 14:01:05 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 13:45, Jeff Layman wrote:
    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost
    of a water softener, and recurring cost for softening salts, I have no
    idea.

    I have seen toilets shower heads and taps almost completely blocked by scale

    For me its a no brainer to install one
    --
    For every complex problem there is an answer that is clear, simple, and
    wrong.

    H.L.Mencken

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Chris Green@cl@isbd.net to uk.d-i-y on Wed Nov 11 14:58:26 2026
    From Newsgroup: uk.d-i-y

    The Natural Philosopher <tnp@invalid.invalid> wrote:
    On 11/11/2026 13:45, Jeff Layman wrote:
    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost
    of a water softener, and recurring cost for softening salts, I have no idea.

    I have seen toilets shower heads and taps almost completely blocked by scale

    For me its a no brainer to install one

    Isn't there some evidence to indicate that hard water is healthier (to
    drink) in some ways?

    Soft water makes stronger tea though.
    --
    Chris Green
    -+
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Layman@Jeff@invalid.invalid to uk.d-i-y on Wed Nov 11 15:11:38 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 14:01, The Natural Philosopher wrote:
    On 11/11/2026 13:45, Jeff Layman wrote:
    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost
    of a water softener, and recurring cost for softening salts, I have no
    idea.

    I have seen toilets shower heads and taps almost completely blocked by scale

    Then you've been unlucky. I've lived in 100mg/l+ calcium level water
    supplies for 50+years and never had a problem which wasn't resolved with
    use of a weak acid and sometimes a bit of elbow grease.
    > For me its a no brainer to install one

    Sure, if you've got a spare -u500+ for the unit plus installation cost if
    it's not DIY, and around -u1/kg for the salt.
    --
    Jeff
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Simon Simple@nothanks@nottoday.co.uk to uk.d-i-y on Wed Nov 11 15:20:37 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 09:38, Tricky Dicky wrote:

    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best approach,
    do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the crustiness that accumulated in the toilet cistern and having to replace the shower controls for the same reason I feel we need to do something to avoid future problems.

    Richard

    That's 'moderately hard'. One issue I had with water softening in a
    'very hard' area was that the softener didn't remove Calcium Sulfate.
    While there was only a small amount of this, it did leave a very fine
    scale which didn't respond to any sensible chemicals and needed to be
    scraped off, albeit not very often.

    I conjecture that before I fitted the softener, the Sulfate was mixed in
    with the much greater quantity of Carbonate and washed away with it when treated with descaler (Citric acid).

    On balance, the softener was worth it, but if the water was only
    'moderately hard' and there happened to be Sulfate in it, I'd maybe
    think twice.

    If you use a shower cubicle, always use a Silicone squeegee afterwards.
    I would estimate that this removes 99% of the water from the walls so
    there's a lot less to evaporate and deposit mineral salts.
    --
    SS

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.d-i-y on Wed Nov 11 15:33:01 2026
    From Newsgroup: uk.d-i-y

    Jeff Layman <Jeff@invalid.invalid> wrote:
    On 11/11/2026 14:01, The Natural Philosopher wrote:
    On 11/11/2026 13:45, Jeff Layman wrote:
    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost
    of a water softener, and recurring cost for softening salts, I have no
    idea.

    I have seen toilets shower heads and taps almost completely blocked by scale

    Then you've been unlucky. I've lived in 100mg/l+ calcium level water supplies for 50+years and never had a problem which wasn't resolved with
    use of a weak acid and sometimes a bit of elbow grease.
    > For me its a no brainer to install one

    Sure, if you've got a spare -u500+ for the unit plus installation cost if it's not DIY, and around -u1/kg for the salt.

    I installed a deionising cartridge for my central heating. It was about -u20 for the filter housing and -u10 for the cartridge. No idea how long they
    last as the CH only rarely gets its water replaced.

    Bulk DI resin is about -u3/litre. I can't seem to find any datasheet saying how much water a litre of resin will deionise.

    https://finest-filters.co.uk/collections/di-resin

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From The Natural Philosopher@tnp@invalid.invalid to uk.d-i-y on Wed Nov 11 15:35:18 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 15:11, Jeff Layman wrote:
    On 11/11/2026 14:01, The Natural Philosopher wrote:
    On 11/11/2026 13:45, Jeff Layman wrote:
    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost
    of a water softener, and recurring cost for softening salts, I have no
    idea.

    I have seen toilets shower heads and taps almost completely blocked by
    scale

    Then you've been unlucky. I've lived in 100mg/l+ calcium level water supplies for 50+years and never had a problem which wasn't resolved with
    use of a weak acid and sometimes a bit of elbow grease.
    For me its a no brainer to install one

    Sure, if you've got a spare -u500+ for the unit plus installation cost if it's not DIY, and-a around -u1/kg for the salt.


    The salt is cheaper than the soap

    As for capital costs, over 20 hears that's -u25 a year. 50p a week. I
    don't resent that
    --
    "An intellectual is a person knowledgeable in one field who speaks out
    only in others...rCY

    Tom Wolfe

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Indy Jess John@bathwatchdog@OMITTHISgooglemail.com to uk.d-i-y on Wed Nov 11 23:51:05 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 13:45, Jeff Layman wrote:
    On 11/11/2026 09:38, Tricky Dicky wrote:

    We recently moved into a hard water area and according to Yorkshire Water
    our water on average has 105.3mg/l of Calcium. With a planned kitchen
    refurb in the Spring sometime I am looking into what is the best
    approach,
    do we go for filters or install a water softener?

    I would be interested in any advice from members living in hard water
    areas. There is no adverse taste to the water but after looking at the
    crustiness that accumulated in the toilet cistern and having to
    replace the
    shower controls for the same reason I feel we need to do something to
    avoid
    future problems.

    According to our water supplier, the hardness in our area is 116mg/l of calcium. Note that if you use other online hardness checkers you might
    get slightly different figures.
    <https://mytapwater.co.uk/>: 289.7 mg/l CaCOrea
    <https://waterhard.uk/>: 250 ppm (not otherwise specified) <https://filterflair.co.uk/pages/uk-water-hardness-map>: 292 ppm calcium carbonate
    <https://www.tapwater.uk/guides/water-hardness-map>: 276 mg of limescale minerals
    (Note that 40% of calcium carbonate is calcium)

    We've been here over 15 years and although the limescale is unsightly,
    and, by the way, is unfortunately a much better substrate for mould than porcelain, I've never felt the need for a water softener. Fairly regular
    use of a limescale remover is sufficient (citric acid crystals are
    probably the cheapest and are very effective as a hot saturated
    solution). We have never suffered any physical damage from limescale,
    such as blocked pipes.

    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost
    of a water softener, and recurring cost for softening salts, I have no
    idea.

    According to the mytapwater website, my readings are:
    Hardness: 300.7 mg/l CaCOrea Very Hard
    Classification from your supplierrCOs published zone data.
    Nitrates: 13.8 mg/l Low (Mean for the zone. Legal limit 50 mg/l)
    Lead: 0.4 -|g/l Low

    I have lived in this house for 50 years, and I have not used a water
    softener though I do fill my kettle from a filter jug. The central
    heating system only loses water through evaporation, so on the rare
    occasions when the level gets low enough to need an (automatic) top-up
    it has never posed a problem for the boiler. I use a descaler in my
    washing machine about every 2 months and each has lasted over 10 years.
    I descale the shower head whenever it looks as though it needs it, but
    the shower unit itself has got very stiff to turn on and off and I am
    ready to replace it, but it has served me faithfully for nearly 20 years
    so i have really had my money's worth. My dishwasher has an integral
    water softener so that only needs salt when the warning light comes on.

    On the plus side, the water supplied has a large artesian content, and
    it contains trace elements like copper, zinc and magnesium alongside the chemicals that mytapwater identifies, so I am reluctant to use a
    softener that might remove the health giving contents alongside the
    hardness reduction.

    What I have found is that local white goods sellers, plumbers and
    hardware stores are familiar with the potential problems the local tap
    water poses and they can recommend which brands and models cope best
    with the local water supplies. Following their recommendations has not
    let me down so far.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From The Natural Philosopher@tnp@invalid.invalid to uk.d-i-y on Thu Nov 12 08:02:24 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 23:51, Indy Jess John wrote:
    On the plus side, the water supplied has a large artesian content, and
    it contains trace elements like copper, zinc and magnesium alongside the chemicals that mytapwater identifies, so I am reluctant to use a
    softener that might remove the health giving contents alongside the
    hardness reduction.

    You do not soften the kitchen tap
    --
    Outside of a dog, a book is a man's best friend. Inside of a dog it's
    too dark to read.

    Groucho Marx



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Layman@Jeff@invalid.invalid to uk.d-i-y on Thu Nov 12 08:15:26 2026
    From Newsgroup: uk.d-i-y

    On 11/11/2026 15:33, Theo wrote:
    Jeff Layman <Jeff@invalid.invalid> wrote:
    On 11/11/2026 14:01, The Natural Philosopher wrote:
    On 11/11/2026 13:45, Jeff Layman wrote:
    How much you'd save in soap and detergent, and possibly the cost of
    power for heating washing machines and boilers against the capital cost >>>> of a water softener, and recurring cost for softening salts, I have no >>>> idea.

    I have seen toilets shower heads and taps almost completely blocked by scale

    Then you've been unlucky. I've lived in 100mg/l+ calcium level water
    supplies for 50+years and never had a problem which wasn't resolved with
    use of a weak acid and sometimes a bit of elbow grease.
    > For me its a no brainer to install one

    Sure, if you've got a spare -u500+ for the unit plus installation cost if
    it's not DIY, and around -u1/kg for the salt.

    I installed a deionising cartridge for my central heating. It was about -u20 for the filter housing and -u10 for the cartridge. No idea how long they last as the CH only rarely gets its water replaced.

    As it's effectively a closed system, other than for the very occasional top-up, there would seem to be no advantage in using a deioniser. That's especially true as it usually runs at a lowish temperature (around
    60-#C?) where the possibility of limescale formation is reduced. By the
    way, trying to find information relating to temperature change and
    limescale formation wasn't easy. I could only find one page which stated
    "In hot-water systems, practically precipitation of calcium carbonate,
    CaCO3, starts to occur at approximately 35-#C to 40-#C (or as pressure
    drops), and progressively worsens as temperatures rise".

    Bulk DI resin is about -u3/litre. I can't seem to find any datasheet saying how much water a litre of resin will deionise.

    https://finest-filters.co.uk/collections/di-resin

    +1

    Trying to find decent quantitative information in this area is a challenge.
    --
    Jeff
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.d-i-y on Thu Nov 12 10:51:58 2026
    From Newsgroup: uk.d-i-y

    Jeff Layman <Jeff@invalid.invalid> wrote:
    On 11/11/2026 15:33, Theo wrote:

    I installed a deionising cartridge for my central heating. It was about -u20 for the filter housing and -u10 for the cartridge. No idea how long they last as the CH only rarely gets its water replaced.

    As it's effectively a closed system, other than for the very occasional top-up, there would seem to be no advantage in using a deioniser. That's especially true as it usually runs at a lowish temperature (around
    60-#C?) where the possibility of limescale formation is reduced. By the
    way, trying to find information relating to temperature change and
    limescale formation wasn't easy. I could only find one page which stated
    "In hot-water systems, practically precipitation of calcium carbonate, CaCO3, starts to occur at approximately 35-#C to 40-#C (or as pressure drops), and progressively worsens as temperatures rise".

    VDI2035 is a method of treating heating water that spurns using inhibitors, instead carefully controlling the pH, dissolved oxygen and dissolved salts:

    https://www.heatgeek.com/articles/heating-water-treatment-explained-vdi-2035

    It requires conductivity to be below 1500 microsiemens. With the deioniser I get about 700. Hardness of input water is about 300ppm, output water is
    4ppm.

    Bulk DI resin is about -u3/litre. I can't seem to find any datasheet saying
    how much water a litre of resin will deionise.

    https://finest-filters.co.uk/collections/di-resin

    +1

    Trying to find decent quantitative information in this area is a challenge.

    Everyone just says 'use it until the TDS rises' which is no help :(

    I found a calculator:
    https://ultra-soft.co.uk/di-resin-calculator/
    which says 'based on TDS removal of 30,000ppm per litre' but not where that number comes from. Their resin page says "1L resin removes ~30,000 TDS"
    which is lacking units, so I'm not sure I trust it.

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Indy Jess John@bathwatchdog@OMITTHISgooglemail.com to uk.d-i-y on Sat Nov 14 11:01:44 2026
    From Newsgroup: uk.d-i-y

    On 12/11/2026 08:02, The Natural Philosopher wrote:
    On 11/11/2026 23:51, Indy Jess John wrote:
    On the plus side, the water supplied has a large artesian content, and
    it contains trace elements like copper, zinc and magnesium alongside
    the chemicals that mytapwater identifies, so I am reluctant to use a
    softener that might remove the health giving contents alongside the
    hardness reduction.

    You do not soften the kitchen tap

    Following the pipes from the stopcock onwards, there are branches off
    the main, one going to washing machine in the utility room, one going to
    the downstairs bathroom serving the bath and washbasin and then through
    the wall to the outside tap in the garden, one going to the upstairs
    toilet and washbasin and also the cold water tank and the cistern to top
    up the central heating and then the incoming pipe goes on to the kitchen
    sink tap and the dishwasher. Other than fitting several softeners for
    each of the branch circuits, I can't see any way of not softening the
    kitchen tap but softening everything else.

    It is plumbed that way because of the geography of the house. The water
    main comes in from the street, and the kitchen sink looks out onto the
    back garden.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Davey@davey@example.invalid to uk.d-i-y on Sat Nov 14 11:26:09 2026
    From Newsgroup: uk.d-i-y

    On Sat, 14 Nov 2026 11:01:44 +0000
    Indy Jess John <bathwatchdog@OMITTHISgooglemail.com> wrote:

    On 12/11/2026 08:02, The Natural Philosopher wrote:
    On 11/11/2026 23:51, Indy Jess John wrote:
    On the plus side, the water supplied has a large artesian content,
    and it contains trace elements like copper, zinc and magnesium
    alongside the chemicals that mytapwater identifies, so I am
    reluctant to use a softener that might remove the health giving
    contents alongside the hardness reduction.

    You do not soften the kitchen tap

    Following the pipes from the stopcock onwards, there are branches off
    the main, one going to washing machine in the utility room, one going
    to the downstairs bathroom serving the bath and washbasin and then
    through the wall to the outside tap in the garden, one going to the
    upstairs toilet and washbasin and also the cold water tank and the
    cistern to top up the central heating and then the incoming pipe goes
    on to the kitchen sink tap and the dishwasher. Other than fitting
    several softeners for each of the branch circuits, I can't see any
    way of not softening the kitchen tap but softening everything else.

    It is plumbed that way because of the geography of the house. The
    water main comes in from the street, and the kitchen sink looks out
    onto the back garden.


    My house is similar, but the unsoftened water does go to the
    kitchen, then on to the outside tap, which is all correct. The problem
    is that the dishwasher is on the same line, but the built-in softener
    appears to work perfectly well, kept topped up with salt when required.
    Another quirk is that the softened water for the washing machine makes
    a massive journey: across the loft, down to the cellar, across the
    cellar ceiling, back up to ground level for the utility room and the
    washing machine. Even if the machine could accept hot water separately,
    it would never get there in time.
    --
    Davey.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Timatmarford@tim@marford.uk.com to uk.d-i-y on Sat Nov 14 11:47:11 2026
    From Newsgroup: uk.d-i-y

    On 14/11/2026 11:01, Indy Jess John wrote:
    On 12/11/2026 08:02, The Natural Philosopher wrote:
    On 11/11/2026 23:51, Indy Jess John wrote:
    On the plus side, the water supplied has a large artesian content,
    and it contains trace elements like copper, zinc and magnesium
    alongside the chemicals that mytapwater identifies, so I am reluctant
    to use a softener that might remove the health giving contents
    alongside the hardness reduction.

    You do not soften the kitchen tap

    Following the pipes from the stopcock onwards, there are branches off
    the main, one going to washing machine in the utility room, one going to
    the downstairs bathroom serving the bath and washbasin and then through
    the wall to the outside tap in the garden, one going to the upstairs
    toilet and washbasin and also the cold water tank and the cistern to top
    up the central heating and then the incoming pipe goes on to the kitchen sink tap and the dishwasher.-a Other than fitting several softeners for
    each of the branch circuits, I can't see any way of not softening the kitchen tap but softening everything else.

    It is plumbed that way because of the geography of the house.-a The water main comes in from the street, and the kitchen sink looks out onto the
    back garden.

    I have 3 intake points to overcome just those sort of problems!
    Installed during a house extension so not much extra work.

    Sadly, the only convenient connection to the fridge chilled water outlet
    is soft:-) The visiting grandchildren are the only users so I keep quiet.

    --- Synchronet 3.22a-Linux NewsLink 1.2