• Re: Screw Sizing

    From Jeff Gaines@jgnewsid@outlook.com to uk.d-i-y on Thu Apr 30 10:57:35 2026
    From Newsgroup: uk.d-i-y

    On 23/04/2026 in message <xn0povjvq2zhqbv006@news.individual.net> Jeff
    Gaines wrote:


    I am looking for some hard drive screws for my HP Proliant Microserver
    Gen8. They are described as 6-32, HP doesn't list them as they are only >available with the hard drive carriers. They need to be countersunk but
    with larger heads than standard or they just slip through the carrier
    holes.

    I don't know what either the "6" or the "32" means and would appreciate
    some guidance. If anybody knows of a source of slightly odd screws it
    would be appreciated, otherwise I think I will try and find small washers
    to stop the heads slipping through the holes but I need to know the size I >am looking for!

    In case anybody is interested in a solution this is what I got:

    https://www.amazon.co.uk/dp/B0DH24HR17

    M3 Nylon Flat Washers 3mm ID 7mm OD 1mm Thick Plain Washer.

    Standard countersunk drive screws screw into them and then they hold the
    drive in the carrier and have enough flexibility to pull into the countersinking in the carrier.
    --
    Jeff Gaines Dorset UK
    If Bj%rn & Benny had been called Syd and Dave then ABBA would have been
    called ASDA.
    --- Synchronet 3.21f-Linux NewsLink 1.2
  • From Jeff Gaines@jgnewsid@outlook.com to uk.d-i-y on Fri May 8 12:42:47 2026
    From Newsgroup: uk.d-i-y

    On 23/04/2026 in message
    <20260423192814.41fa470c@jrenewsid.jretrading.com> Joe wrote:

    On 23 Apr 2026 18:12:08 GMT
    "Jeff Gaines" <jgnewsid@outlook.com> wrote:


    Great minds "You last purchased this item on 3 Apr 2026" :-)

    The heads are too small, they slip through the carriers.

    It may have to be small washers...


    That's odd, the countersink angle is 90 degrees as usual, so you won't >generally find larger heads.

    This one's not countersunk but might do the job:

    https://www.amazon.co.uk/DSLRKIT-6-32-16-Phillips-50/dp/B016OCJSE6

    Just to say I ordered these but they have been stuck in the bends of
    Hormuz so just arrived.

    Spot on, tuck in the countersinking nicely without slipping through.

    Many thanks :-)
    --
    Jeff Gaines Dorset UK
    How does a gender neutral bog differ from a unisex bog ?
    It has a non-binary number on the door.
    --- Synchronet 3.22a-Linux NewsLink 1.2