• Liquid glass

    From Old John@watcombeman@yahoo.co.uk to uk.comp.sys.mac on Fri Oct 9 16:08:06 2026
    From Newsgroup: uk.comp.sys.mac

    In Settings/Appearance there is an item entitled Liquid Glass. It includes
    some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and back, but nothing seems to change. What am I missing?
    --
    Classic computing: Computers do what you tell them to do,
    not what you want them to do.
    Modern computing: Computers do what they want to do,
    no matter what you tell them to do.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David B.@davidontj@gmail.com to uk.comp.sys.mac on Fri Oct 9 16:18:06 2026
    From Newsgroup: uk.comp.sys.mac

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    In Settings/Appearance there is an item entitled Liquid Glass. It includes some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and back, but nothing seems to change. What am I missing?

    Hello John, :-D

    It is great to hear from you again!

    That slider in System Settings >Appearance >Liquid Glass controls how transparent, glassy, and refractive the interface elements are (such as sidebars, toolbars, buttons, and panels across macOS).

    Dragging it all the way to one end makes the interface elements look more crystal-clear and transparent, while pulling it to the other end increases the tint and opacity to make them more solid. If you are wondering why nothing much seemed to happen when you dragged it back and forth, it is often because of your current desktop wallpaper.

    Because the "Liquid Glass" effect works by dynamically sampling, reflecting, and refracting whatever colours happen to be directly behind the window, a wallpaper with uniform colours, low contrast, or a dark theme can make the differences look remarkably subtle - to the point where it's hard to spot any change at all just by moving the slider.

    If you want to see what it's actually doing, try opening a window like Photos or bringing up the Control Center / Notification Center over a very busy, colourful section of your desktop background, and then move the slider from
    end to end.

    You should notice the background filtering and glass-like sheen change from a clear transparency to a heavier tint.

    Best regards,

    David
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mark@captain.black@gmail.com to uk.comp.sys.mac on Fri Oct 9 21:34:44 2026
    From Newsgroup: uk.comp.sys.mac

    On 9 Oct 2026 at 5:08:06rC>pm BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    In Settings/Appearance there is an item entitled Liquid Glass. It includes some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and back, but nothing seems to change. What am I missing?

    It's supposed to vary the degree of Liquid Glassy-ness.
    --
    Cheers ... Mark
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Alan B@alanrichardbarker@gmail.com.invalid to uk.comp.sys.mac on Sat Oct 10 07:45:46 2026
    From Newsgroup: uk.comp.sys.mac

    On 2026-10-09, Mark <captain.black@gmail.com> wrote:
    On 9 Oct 2026 at 5:08:06rC>pm BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    In Settings/Appearance there is an item entitled Liquid Glass. It includes >> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >> back, but nothing seems to change. What am I missing?

    It's supposed to vary the degree of Liquid Glassy-ness.

    I've spend more time trying to get Clarus to appear in the macOS
    System Setting ;) Works in iOS though :)
    --
    Moof, Alan
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Old John@watcombeman@yahoo.co.uk to uk.comp.sys.mac on Sun Oct 11 07:06:21 2026
    From Newsgroup: uk.comp.sys.mac

    On 9 Oct 2026 at 22:34:44 BST, "Mark" <captain.black@gmail.com> wrote:

    On 9 Oct 2026 at 5:08:06rC>pm BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    In Settings/Appearance there is an item entitled Liquid Glass. It includes >> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >> back, but nothing seems to change. What am I missing?

    It's supposed to vary the degree of Liquid Glassy-ness.

    Humph.

    My sight, alas, is gradually failing. I find it hard enough to read plain text on a white background. As long as this cosmetic gimmickry doesn't get in the way of that, it can take a running jump at itself.

    I think I'll leave it midway FTTB and do something more profitable.
    --
    God makes power, Man makes engines.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Old John@watcombeman@yahoo.co.uk to uk.comp.sys.mac on Sun Oct 11 07:18:15 2026
    From Newsgroup: uk.comp.sys.mac

    On 9 Oct 2026 at 17:18:06 BST, "David B." <davidontj@gmail.com> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    In Settings/Appearance there is an item entitled Liquid Glass. It includes >> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >> back, but nothing seems to change. What am I missing?

    Hello John, :-D

    It is great to hear from you again!

    That slider in System Settings >Appearance >Liquid Glass controls how transparent, glassy, and refractive the interface elements are (such as sidebars, toolbars, buttons, and panels across macOS).

    Dragging it all the way to one end makes the interface elements look more crystal-clear and transparent, while pulling it to the other end increases the
    tint and opacity to make them more solid. If you are wondering why nothing much seemed to happen when you dragged it back and forth, it is often because of your current desktop wallpaper.

    Because the "Liquid Glass" effect works by dynamically sampling, reflecting, and refracting whatever colours happen to be directly behind the window, a wallpaper with uniform colours, low contrast, or a dark theme can make the differences look remarkably subtle - to the point where it's hard to spot any change at all just by moving the slider.

    If you want to see what it's actually doing, try opening a window like Photos or bringing up the Control Center / Notification Center over a very busy, colourful section of your desktop background, and then move the slider from end to end.

    You should notice the background filtering and glass-like sheen change from a clear transparency to a heavier tint.

    Best regards,

    David

    Now there is another thing. I have had a setup which changes my wallpaper
    every 20 minutes, using images in a specified folder. This has been running
    for years without problems.

    But under this latest version of MacOS it keeps defaulting to plain blue, and
    I have to go to Settings to get it back.

    There is no good reason why it should be unstable. Personally, 27.0.1 has been a bit of a
    disaster. Apple has list sight of the KISS principle.
    --
    God makes power, Man makes engines.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Old John@watcombeman@yahoo.co.uk to uk.comp.sys.mac on Sun Oct 11 07:22:10 2026
    From Newsgroup: uk.comp.sys.mac

    On 11 Oct 2026 at 08:18:15 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    On 9 Oct 2026 at 17:18:06 BST, "David B." <davidontj@gmail.com> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>
    In Settings/Appearance there is an item entitled Liquid Glass. It includes >>> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >>> back, but nothing seems to change. What am I missing?

    Hello John, :-D

    It is great to hear from you again!

    That slider in System Settings >Appearance >Liquid Glass controls how
    transparent, glassy, and refractive the interface elements are (such as
    sidebars, toolbars, buttons, and panels across macOS).

    Dragging it all the way to one end makes the interface elements look more
    crystal-clear and transparent, while pulling it to the other end increases the
    tint and opacity to make them more solid. If you are wondering why nothing >> much seemed to happen when you dragged it back and forth, it is often because
    of your current desktop wallpaper.

    Because the "Liquid Glass" effect works by dynamically sampling, reflecting, >> and refracting whatever colours happen to be directly behind the window, a >> wallpaper with uniform colours, low contrast, or a dark theme can make the >> differences look remarkably subtle - to the point where it's hard to spot any
    change at all just by moving the slider.

    If you want to see what it's actually doing, try opening a window like Photos
    or bringing up the Control Center / Notification Center over a very busy,
    colourful section of your desktop background, and then move the slider from >> end to end.

    You should notice the background filtering and glass-like sheen change from a
    clear transparency to a heavier tint.

    Best regards,

    David

    Now there is another thing. I have had a setup which changes my wallpaper every 20 minutes, using images in a specified folder. This has been running for years without problems.

    But under this latest version of MacOS it keeps defaulting to plain blue, and I have to go to Settings to get it back.

    There is no good reason why it should be unstable. Personally, 27.0.1 has been
    a bit of a
    disaster. Apple has list sight of the KISS principle.

    And the desktop has just gone back to the normal setup, with no intervention
    by me!
    --
    God made the integers. All else is the work of man.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David B.@davidontj@gmail.com to uk.comp.sys.mac on Sun Oct 11 07:52:51 2026
    From Newsgroup: uk.comp.sys.mac

    On 11 Oct 2026 at 08:22:10 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    On 11 Oct 2026 at 08:18:15 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    On 9 Oct 2026 at 17:18:06 BST, "David B." <davidontj@gmail.com> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>>
    In Settings/Appearance there is an item entitled Liquid Glass. It includes >>>> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >>>> back, but nothing seems to change. What am I missing?

    Hello John, :-D

    It is great to hear from you again!

    That slider in System Settings >Appearance >Liquid Glass controls how
    transparent, glassy, and refractive the interface elements are (such as
    sidebars, toolbars, buttons, and panels across macOS).

    Dragging it all the way to one end makes the interface elements look more >>> crystal-clear and transparent, while pulling it to the other end increases the
    tint and opacity to make them more solid. If you are wondering why nothing >>> much seemed to happen when you dragged it back and forth, it is often because
    of your current desktop wallpaper.

    Because the "Liquid Glass" effect works by dynamically sampling, reflecting,
    and refracting whatever colours happen to be directly behind the window, a >>> wallpaper with uniform colours, low contrast, or a dark theme can make the >>> differences look remarkably subtle - to the point where it's hard to spot any
    change at all just by moving the slider.

    If you want to see what it's actually doing, try opening a window like Photos
    or bringing up the Control Center / Notification Center over a very busy, >>> colourful section of your desktop background, and then move the slider from >>> end to end.

    You should notice the background filtering and glass-like sheen change from a
    clear transparency to a heavier tint.

    Best regards,

    David

    Now there is another thing. I have had a setup which changes my wallpaper
    every 20 minutes, using images in a specified folder. This has been running >> for years without problems.

    But under this latest version of MacOS it keeps defaulting to plain blue, and
    I have to go to Settings to get it back.

    There is no good reason why it should be unstable. Personally, 27.0.1 has been
    a bit of a
    disaster. Apple has list sight of the KISS principle.

    And the desktop has just gone back to the normal setup, with no intervention by me!

    <SHOCK>!!!

    Hello again, John,

    That kind of erratic behaviour - where the custom desktop slideshow drops back to a plain solid colour and then spontaneously restores itself - is a classic sign of the macOS system background process (specifically wallpaperd or dock) temporarily losing access to the source folder or hitting a index glitch in macOS 27.x.

    A few possibilities behind why itrCOs behaving so unpredictably:

    Location of your photo folder: If your wallpaper folder is stored in iCloud Drive, on an external drive, or in a path that syncs, macOS occasionally fails to fetch the next image in time when waking or switching wallpapers. When the wallpaper daemon gets a "file not found" or permission timeout, it panics and drops back to the default system blue.

    System index glitch: When it restores itself automatically without your intervention, it usually means the background process restarted itself in the background and re-indexed the folder.

    A couple of quick things worth checking if it keeps dropping out:

    Keep the folder local: Ensure the folder containing your wallpaper photos is stored directly in your local User folder (e.g., inside your local Pictures folder) rather than synced to iCloud or stored on an external volume.

    Permissions / Re-selection: In System Settings >Wallpaper, remove the custom folder reference and re-add it from scratch to force macOS to rebuild its
    index for that folder.

    I agree with you completely regarding the KISS principle - ApplerCOs recent habit of over-complicating background services and "eye-candy" features like Liquid Glass often breaks the solid, reliable basics that used to just work seamlessly for years!

    Best regards,

    David
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Nick Charles@none@none.none to uk.comp.sys.mac on Mon Oct 12 03:42:25 2026
    From Newsgroup: uk.comp.sys.mac

    Old John <watcombeman@yahoo.co.uk> wrote:
    On 9 Oct 2026 at 17:18:06 BST, "David B." <davidontj@gmail.com> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>
    In Settings/Appearance there is an item entitled Liquid Glass. It includes >>> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >>> back, but nothing seems to change. What am I missing?

    Hello John, :-D

    It is great to hear from you again!

    That slider in System Settings >Appearance >Liquid Glass controls how
    transparent, glassy, and refractive the interface elements are (such as
    sidebars, toolbars, buttons, and panels across macOS).

    Dragging it all the way to one end makes the interface elements look more
    crystal-clear and transparent, while pulling it to the other end increases the
    tint and opacity to make them more solid. If you are wondering why nothing >> much seemed to happen when you dragged it back and forth, it is often because
    of your current desktop wallpaper.

    Because the "Liquid Glass" effect works by dynamically sampling, reflecting, >> and refracting whatever colours happen to be directly behind the window, a >> wallpaper with uniform colours, low contrast, or a dark theme can make the >> differences look remarkably subtle - to the point where it's hard to spot any
    change at all just by moving the slider.

    If you want to see what it's actually doing, try opening a window like Photos
    or bringing up the Control Center / Notification Center over a very busy,
    colourful section of your desktop background, and then move the slider from >> end to end.

    You should notice the background filtering and glass-like sheen change from a
    clear transparency to a heavier tint.

    Best regards,

    David

    Now there is another thing. I have had a setup which changes my wallpaper every 20 minutes, using images in a specified folder. This has been running for years without problems.

    But under this latest version of MacOS it keeps defaulting to plain blue, and I have to go to Settings to get it back.

    There is no good reason why it should be unstable. Personally, 27.0.1 has been
    a bit of a
    disaster. Apple has list sight of the KISS principle.

    So why did you install it? What is the rush to install new versions?

    I am still on 26.7.1 here on everything I own. No problems at all.

    I might get around to 27.1.2 or whatever sometime in January. Or not. Depending on the reviews of course. Because I am never in a hurry to
    install new whatever. Particularly when nothing is broken in old
    whatever.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Old John@watcombeman@yahoo.co.uk to uk.comp.sys.mac on Mon Oct 12 08:33:25 2026
    From Newsgroup: uk.comp.sys.mac

    On 12 Oct 2026 at 04:42:25 BST, "Nick Charles" <none@none.none> wrote:

    Old John <watcombeman@yahoo.co.uk> wrote:
    On 9 Oct 2026 at 17:18:06 BST, "David B." <davidontj@gmail.com> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>>
    In Settings/Appearance there is an item entitled Liquid Glass. It includes >>>> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >>>> back, but nothing seems to change. What am I missing?

    Hello John, :-D

    It is great to hear from you again!

    That slider in System Settings >Appearance >Liquid Glass controls how
    transparent, glassy, and refractive the interface elements are (such as
    sidebars, toolbars, buttons, and panels across macOS).

    Dragging it all the way to one end makes the interface elements look more >>> crystal-clear and transparent, while pulling it to the other end increases the
    tint and opacity to make them more solid. If you are wondering why nothing >>> much seemed to happen when you dragged it back and forth, it is often because
    of your current desktop wallpaper.

    Because the "Liquid Glass" effect works by dynamically sampling, reflecting,
    and refracting whatever colours happen to be directly behind the window, a >>> wallpaper with uniform colours, low contrast, or a dark theme can make the >>> differences look remarkably subtle - to the point where it's hard to spot any
    change at all just by moving the slider.

    If you want to see what it's actually doing, try opening a window like Photos
    or bringing up the Control Center / Notification Center over a very busy, >>> colourful section of your desktop background, and then move the slider from >>> end to end.

    You should notice the background filtering and glass-like sheen change from a
    clear transparency to a heavier tint.

    Best regards,

    David

    Now there is another thing. I have had a setup which changes my wallpaper
    every 20 minutes, using images in a specified folder. This has been running >> for years without problems.

    But under this latest version of MacOS it keeps defaulting to plain blue, and
    I have to go to Settings to get it back.

    There is no good reason why it should be unstable. Personally, 27.0.1 has been
    a bit of a
    disaster. Apple has list sight of the KISS principle.

    So why did you install it? What is the rush to install new versions?

    I am still on 26.7.1 here on everything I own. No problems at all.

    I might get around to 27.1.2 or whatever sometime in January. Or not. Depending on the reviews of course. Because I am never in a hurry to install new whatever. Particularly when nothing is broken in old
    whatever.

    I have ususally upgraded at once with no problems. This was the exception and 20:20 hindsight indicates it was a blunder.

    i shall not make that mistake again.
    --
    An infinitely complex system can fail in an infinite number of ways.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David B.@davidontj@gmail.com to uk.comp.sys.mac on Mon Oct 12 09:47:01 2026
    From Newsgroup: uk.comp.sys.mac

    On 12 Oct 2026 at 09:33:25 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:
    <font color="#000000">[....]</font>
    I have ususally upgraded at once with no problems. This was the exception and 20:20 hindsight indicates it was a blunder.

    i shall not make that mistake again.


    Hi John

    I'd like to recommend that you read this article by an ex-Royal Navy doctor!

    (Surgeon Commander Howard Oakley RN Rtd)

    https://eclecticlight.co/2026/10/11/last-week-on-my-mac-when-is-it-safe-to-upgrade-macos/

    LIke you, I had always been an early adopter - until my hardware was
    classified as "Vintage"!

    Kind regards,

    David
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Another John@lalaw44@hotmail.com to uk.comp.sys.mac on Mon Oct 12 18:44:09 2026
    From Newsgroup: uk.comp.sys.mac

    On 12 Oct 2026 at 09:33:25 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    On 12 Oct 2026 at 04:42:25 BST, "Nick Charles" <none@none.none> wrote:

    So why did you install it? What is the rush to install new versions?

    I am still on 26.7.1 here on everything I own. No problems at all.

    I might get around to 27.1.2 or whatever sometime in January. Or not.
    Depending on the reviews of course. Because I am never in a hurry to
    install new whatever. Particularly when nothing is broken in old
    whatever.

    I have ususally upgraded at once with no problems. This was the exception and 20:20 hindsight indicates it was a blunder.

    i shall not make that mistake again.

    But isn't it the case that Apple, for decades now, make hardware that is good for 20 years, but which will only run an OS which is good for (?) six years? iow we are forced to buy new Macs "or suffer the consequences".

    Cheers
    John
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Chris@ithinkiam@gmail.com to uk.comp.sys.mac on Tue Oct 13 06:44:07 2026
    From Newsgroup: uk.comp.sys.mac

    Nick Charles <none@none.none> wrote:
    Old John <watcombeman@yahoo.co.uk> wrote:
    On 9 Oct 2026 at 17:18:06 BST, "David B." <davidontj@gmail.com> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>>
    In Settings/Appearance there is an item entitled Liquid Glass. It includes >>>> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >>>> back, but nothing seems to change. What am I missing?

    Hello John, :-D

    It is great to hear from you again!

    That slider in System Settings >Appearance >Liquid Glass controls how
    transparent, glassy, and refractive the interface elements are (such as
    sidebars, toolbars, buttons, and panels across macOS).

    Dragging it all the way to one end makes the interface elements look more >>> crystal-clear and transparent, while pulling it to the other end increases the
    tint and opacity to make them more solid. If you are wondering why nothing >>> much seemed to happen when you dragged it back and forth, it is often because
    of your current desktop wallpaper.

    Because the "Liquid Glass" effect works by dynamically sampling, reflecting,
    and refracting whatever colours happen to be directly behind the window, a >>> wallpaper with uniform colours, low contrast, or a dark theme can make the >>> differences look remarkably subtle - to the point where it's hard to spot any
    change at all just by moving the slider.

    If you want to see what it's actually doing, try opening a window like Photos
    or bringing up the Control Center / Notification Center over a very busy, >>> colourful section of your desktop background, and then move the slider from >>> end to end.

    You should notice the background filtering and glass-like sheen change from a
    clear transparency to a heavier tint.

    Best regards,

    David

    Now there is another thing. I have had a setup which changes my wallpaper
    every 20 minutes, using images in a specified folder. This has been running >> for years without problems.

    But under this latest version of MacOS it keeps defaulting to plain blue, and
    I have to go to Settings to get it back.

    There is no good reason why it should be unstable. Personally, 27.0.1 has been
    a bit of a
    disaster. Apple has list sight of the KISS principle.

    So why did you install it? What is the rush to install new versions?

    I am still on 26.7.1 here on everything I own. No problems at all.

    I might get around to 27.1.2 or whatever sometime in January. Or not. Depending on the reviews of course. Because I am never in a hurry to install new whatever. Particularly when nothing is broken in old
    whatever.

    Apple OS updates used to be completely routine and uneventful. That was one
    of the beauties of the OS.



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Chris@ithinkiam@gmail.com to uk.comp.sys.mac on Tue Oct 13 06:44:08 2026
    From Newsgroup: uk.comp.sys.mac

    Another John <lalaw44@hotmail.com> wrote:
    On 12 Oct 2026 at 09:33:25 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    On 12 Oct 2026 at 04:42:25 BST, "Nick Charles" <none@none.none> wrote:

    So why did you install it? What is the rush to install new versions?

    I am still on 26.7.1 here on everything I own. No problems at all.

    I might get around to 27.1.2 or whatever sometime in January. Or not.
    Depending on the reviews of course. Because I am never in a hurry to
    install new whatever. Particularly when nothing is broken in old
    whatever.

    I have ususally upgraded at once with no problems. This was the exception and
    20:20 hindsight indicates it was a blunder.

    i shall not make that mistake again.

    But isn't it the case that Apple, for decades now, make hardware that is good for 20 years, but which will only run an OS which is good for (?) six years? iow we are forced to buy new Macs "or suffer the consequences".

    Once you include security updates its 9-10 years of support.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Old John@watcombeman@yahoo.co.uk to uk.comp.sys.mac on Wed Oct 14 06:46:10 2026
    From Newsgroup: uk.comp.sys.mac

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    In Settings/Appearance there is an item entitled Liquid Glass. It includes some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and back, but nothing seems to change. What am I missing?

    Slightly off topic because it is IOS/iPadOS, but another problem. The inbuilt Print that you see at the bottom of emails doesn't work. I can set it up to print an email, all seems well. I tell it to print - and nothing happens.

    I have two Canon printers and Canon PRINT will print just fine on both from both devices. So it is not that printing is broken, just that the default
    Print won't.

    Classic computing: Computers do what you tell them to do,
    not what you want them to do.
    Modern computing: Computers do what they want to do,
    no matter what you tell them to do.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David B.@davidontj@gmail.com to uk.comp.sys.mac on Wed Oct 14 23:08:04 2026
    From Newsgroup: uk.comp.sys.mac

    On 14 Oct 2026 at 07:46:10 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    In Settings/Appearance there is an item entitled Liquid Glass. It includes >> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >> back, but nothing seems to change. What am I missing?

    Slightly off topic because it is IOS/iPadOS, but another problem. The inbuilt Print that you see at the bottom of emails doesn't work. I can set it up to print an email, all seems well. I tell it to print - and nothing happens.

    I have two Canon printers and Canon PRINT will print just fine on both from both devices. So it is not that printing is broken, just that the default Print won't.

    Classic computing: Computers do what you tell them to do,
    not what you want them to do.
    Modern computing: Computers do what they want to do,
    no matter what you tell them to do.


    Is this item of any help, John?

    https://www.iphonelife.com/blog/31936/tip-day-how-print-your-iphone-or-ipad

    Easy - when you know how!!!
    --
    kind regards,
    David
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Old John@watcombeman@yahoo.co.uk to uk.comp.sys.mac on Thu Oct 15 14:23:47 2026
    From Newsgroup: uk.comp.sys.mac

    On 15 Oct 2026 at 00:08:04 BST, "David B." <davidontj@gmail.com> wrote:

    On 14 Oct 2026 at 07:46:10 BST, "Old John" <watcombeman@yahoo.co.uk> wrote:

    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>
    In Settings/Appearance there is an item entitled Liquid Glass. It includes >>> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >>> back, but nothing seems to change. What am I missing?

    Slightly off topic because it is IOS/iPadOS, but another problem. The inbuilt
    Print that you see at the bottom of emails doesn't work. I can set it up to >> print an email, all seems well. I tell it to print - and nothing happens.

    I have two Canon printers and Canon PRINT will print just fine on both from >> both devices. So it is not that printing is broken, just that the default
    Print won't.

    Classic computing: Computers do what you tell them to do,
    not what you want them to do.
    Modern computing: Computers do what they want to do,
    no matter what you tell them to do.


    Is this item of any help, John?

    https://www.iphonelife.com/blog/31936/tip-day-how-print-your-iphone-or-ipad

    Easy - when you know how!!!

    Very interesting, but nothing unfamiliar there.

    I have been doing some fairly intensive research (and wasted a good deal of
    ink and paper).

    Firstly, I can now use Share/Print on the iPad (except from Pages). I think that Canon PRINT was grabbing the printer, anyway now it has gone I get a blue background to the Print button instead of red. It may be that I would have to sign up to Control Centre to be able to print from Pages..

    Secondly, I can now use Share/Print on the iPhone. Pages on the iPhone does
    not have a Share option (or at least I can't find one), but it does have a drop-down menu that includes Print and this works. No such menu on the iPad!

    All of this is of course conditional on Print being available in the Share menu.

    My interest in this is now exhausted - as indeed am I. (Gets back into hole
    and pulls down the lid).
    --
    God made the integers. All else is the work of man.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From David B.@David@hotmail.co.uk to uk.comp.sys.mac on Thu Oct 15 21:52:59 2026
    From Newsgroup: uk.comp.sys.mac

    On 15/10/2026 15:23, Old John wrote:
    On 15 Oct 2026 at 00:08:04 BST, "David B." <davidontj@gmail.com> wrote:

    On 14 Oct 2026 at 07:46:10 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>
    On 9 Oct 2026 at 17:08:06 BST, "Old John" <watcombeman@yahoo.co.uk> wrote: >>>
    In Settings/Appearance there is an item entitled Liquid Glass. It includes >>>> some pretty pictures and a slider.

    What is the slider supposed to do? I pull it from one end to the other and >>>> back, but nothing seems to change. What am I missing?

    Slightly off topic because it is IOS/iPadOS, but another problem. The inbuilt
    Print that you see at the bottom of emails doesn't work. I can set it up to >>> print an email, all seems well. I tell it to print - and nothing happens. >>>
    I have two Canon printers and Canon PRINT will print just fine on both from >>> both devices. So it is not that printing is broken, just that the default >>> Print won't.

    Classic computing: Computers do what you tell them to do,
    not what you want them to do.
    Modern computing: Computers do what they want to do,
    no matter what you tell them to do.


    Is this item of any help, John?

    https://www.iphonelife.com/blog/31936/tip-day-how-print-your-iphone-or-ipad >>
    Easy - when you know how!!!

    Very interesting, but nothing unfamiliar there.

    I have been doing some fairly intensive research (and wasted a good deal of ink and paper).

    Firstly, I can now use Share/Print on the iPad (except from Pages). I think that Canon PRINT was grabbing the printer, anyway now it has gone I get a blue
    background to the Print button instead of red. It may be that I would have to sign up to Control Centre to be able to print from Pages..

    Secondly, I can now use Share/Print on the iPhone. Pages on the iPhone does not have a Share option (or at least I can't find one), but it does have a drop-down menu that includes Print and this works. No such menu on the iPad!

    All of this is of course conditional on Print being available in the Share menu.

    My interest in this is now exhausted - as indeed am I. (Gets back into hole and pulls down the lid).


    Haha! Efye You do make me laugh, John!
    --
    Kind regards,
    David
    --- Synchronet 3.22a-Linux NewsLink 1.2