• Dead Monitor

    From Daniel James@daniel@me.invalid to uk.comp.homebuilt on Tue Oct 27 11:15:30 2026
    From Newsgroup: uk.comp.homebuilt

    My second monitor failed yesterday. There was a sound -- a faint click
    so quiet that I may have imagined it -- and the screen went black. It is
    still recognized as being there by the PC, but displays nothing.

    Subsequent tests show no image from either the VGA or DVI inputs. No
    onscreen menu. The only indication of life is that the blue "Power" LED
    goes on and off when the power switch is operated. It's a touch switch
    not a physical circuit breaker, so that presumable shows that some logic
    is still happening.

    It's a Samsung 2443BW made (in Romania!) in 2008. Fairly old and I'm
    tempted just to chuck it ... but I'd always rather repair something than
    put it into landfill if it can be saved.

    I can get a new monitor for ~-u100-150ish, but new monitors don't
    typically have VGA ports. Most of my kit uses HDMI, but I do still have
    a use for VGA.

    Does anyone have a feeling for the likely cost of repair, these days,
    and/or can suggest a repairer?
    --
    Cheers,
    Daniel.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Graham J@nobody@nowhere.co.uk to uk.comp.homebuilt on Tue Oct 27 11:56:02 2026
    From Newsgroup: uk.comp.homebuilt

    Daniel James wrote:

    [snip]

    It's a Samsung 2443BW made (in Romania!) in 2008. Fairly old and I'm
    tempted just to chuck it ... but I'd always rather repair something than
    put it into landfill if it can be saved.

    [snip]

    I have a spare Samsung SyncMaster 2443 Monitor that you could have.
    It's currently advertised on Gumtree, Ad ID: 1511782901. See:

    <https://www.gumtree.com/p/desktop-workstation-pcs/samsung-syncmaster-2443-monitor/1511782901>

    If it's practical for you to collect it you could make me an offer ...
    --
    Graham J
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to uk.comp.homebuilt on Tue Oct 27 12:13:51 2026
    From Newsgroup: uk.comp.homebuilt

    Daniel James wrote:

    My second monitor failed yesterday. There was a sound -- a faint click so quiet that I may have imagined it -- and the screen went black. It is
    still recognized as being there by the PC, but displays nothing.

    If you shine a strong torch on the screen and look from various angles,
    can you see a "ghost" picture? ... sounds like a backlight failure,
    probably not cost-effective to repair?

    You can get VGA->HDMI but they need active electronics, not simple
    passive connectors (i.e. not especially cheap).
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to uk.comp.homebuilt on Tue Oct 27 12:18:14 2026
    From Newsgroup: uk.comp.homebuilt

    Daniel James <daniel@me.invalid> wrote:
    My second monitor failed yesterday. There was a sound -- a faint click
    so quiet that I may have imagined it -- and the screen went black. It is still recognized as being there by the PC, but displays nothing.

    The EDID EEPROM is powered from the PC end, so it being recognised only
    tells us a few components around the connector are working.

    Subsequent tests show no image from either the VGA or DVI inputs. No onscreen menu. The only indication of life is that the blue "Power" LED
    goes on and off when the power switch is operated. It's a touch switch
    not a physical circuit breaker, so that presumable shows that some logic
    is still happening.

    That sounds like one of the power supply rails has gone down. Not all, otherwise the LED wouldn't work, but perhaps a rail that's necessary for the backlight? Or perhaps the backlight itself.

    It's a Samsung 2443BW made (in Romania!) in 2008. Fairly old and I'm
    tempted just to chuck it ... but I'd always rather repair something than
    put it into landfill if it can be saved.

    I can get a new monitor for ~-u100-150ish, but new monitors don't
    typically have VGA ports. Most of my kit uses HDMI, but I do still have
    a use for VGA.

    Does anyone have a feeling for the likely cost of repair, these days,
    and/or can suggest a repairer?

    You might be lucky and able to board-swap from an identical model. Either buying one with another fault (eg cracked panel) or buying the components individually.

    Labour is going to be ~-u100 minimum (stripdown of these things can be a
    PITA) plus parts so I doubt it's worth it in financial terms.

    I'd investigate a new monitor and perhaps a VGA to HDMI converter.

    If you are feeling brave, you could take it apart yourself and look for
    obvious telltales like blown fuses, bulging capacitors or scorch marks. You have nothing to lose at this point. Obviously be careful of the mains voltages. A common problem is bad capacitors and if one goes it's possible replacing them will help. Ah, looks like that's a common fault: https://www.splitbrain.org/blog/2021-10/20-syncmaster_2443bw_repair

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel James@daniel@me.invalid to uk.comp.homebuilt on Tue Oct 27 12:53:07 2026
    From Newsgroup: uk.comp.homebuilt

    On 27/10/2026 11:56, Graham J wrote:
    I have a spare Samsung SyncMaster 2443 Monitor that you could have. It's currently advertised on Gumtree, Ad ID: 1511782901. See:

    [snip]

    If it's practical for you to collect it you could make me an offer ...

    That does, indeed, look very much like the same monitor.

    Thanks for the offer ... Norfolk is not especially convenient or I might
    take you up on that.
    --
    Cheers,
    Daniel.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel James@daniel@me.invalid to uk.comp.homebuilt on Tue Oct 27 12:59:06 2026
    From Newsgroup: uk.comp.homebuilt

    On 27/10/2026 12:18, Theo wrote:
    The EDID EEPROM is powered from the PC end, so it being recognised only
    tells us a few components around the connector are working.

    That's interesting ... I didn't know that. It makes sense that the PC
    can detect connected monitors even if they're not powered.

    That sounds like one of the power supply rails has gone down. Not all, otherwise the LED wouldn't work, but perhaps a rail that's necessary for the backlight? Or perhaps the backlight itself.

    I wondered about the backlight, but can't see any "ghost image" -- I'll
    take another look with a bright torch as Andy Burns suggests.

    Does anyone have a feeling for the likely cost of repair, these days,
    and/or can suggest a repairer?

    You might be lucky and able to board-swap from an identical model. Either buying one with another fault (eg cracked panel) or buying the components individually.

    Labour is going to be ~-u100 minimum (stripdown of these things can be a PITA) plus parts so I doubt it's worth it in financial terms.

    Yeah, I thought as much. I'm not keen on paying that.

    If you are feeling brave, you could take it apart yourself and look for obvious telltales like blown fuses, bulging capacitors or scorch marks. You have nothing to lose at this point. Obviously be careful of the mains voltages. A common problem is bad capacitors and if one goes it's possible replacing them will help. Ah, looks like that's a common fault: https://www.splitbrain.org/blog/2021-10/20-syncmaster_2443bw_repair

    Yes, I may take a look inside. Not sure whether I'm brave or foolish
    (probably both) but at this stage it can't hurt. I did find one report
    online that someone had just re-soldered some of the connections (not
    even replaced any caps) and the thing had come back to life. It'll be instructive to see what may have failed, in any case.

    Thanks to all who've replied.
    --
    Cheers,
    Daniel.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From RJH@patchmoney@gmx.com to uk.comp.homebuilt on Tue Oct 27 15:23:45 2026
    From Newsgroup: uk.comp.homebuilt

    On 27 Oct 2026 at 11:15:30 GMT, Daniel James wrote:

    My second monitor failed yesterday. There was a sound -- a faint click
    so quiet that I may have imagined it -- and the screen went black. It is still recognized as being there by the PC, but displays nothing.

    Subsequent tests show no image from either the VGA or DVI inputs. No
    onscreen menu. The only indication of life is that the blue "Power" LED
    goes on and off when the power switch is operated. It's a touch switch
    not a physical circuit breaker, so that presumable shows that some logic
    is still happening.

    It's a Samsung 2443BW made (in Romania!) in 2008. Fairly old and I'm
    tempted just to chuck it ... but I'd always rather repair something than
    put it into landfill if it can be saved.

    I can get a new monitor for ~-u100-150ish, but new monitors don't
    typically have VGA ports. Most of my kit uses HDMI, but I do still have
    a use for VGA.

    Does anyone have a feeling for the likely cost of repair, these days,
    and/or can suggest a repairer?

    Might be worth pulling apart? I had one go dead after moving it. Turned out a ribbon cable had come loose.
    --
    Cheers, Rob
    Sheffield, UK
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Graham J@nobody@nowhere.co.uk to uk.comp.homebuilt on Tue Oct 27 16:51:48 2026
    From Newsgroup: uk.comp.homebuilt

    Daniel James wrote:
    On 27/10/2026 11:56, Graham J wrote:
    I have a spare Samsung SyncMaster 2443 Monitor that you could have.
    It's currently advertised on Gumtree, Ad ID: 1511782901. See:

    [snip]

    If it's practical for you to collect it you could make me an offer ...

    That does, indeed, look very much like the same monitor.

    Thanks for the offer ... Norfolk is not especially convenient or I might take you up on that.

    Where are you? If I'm likely to be anywhere near you I could bring it.
    --
    Graham J
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Marco Moock@mm@dorfdsl.de to uk.comp.homebuilt on Thu Oct 29 16:09:56 2026
    From Newsgroup: uk.comp.homebuilt

    Am 27.10.26 um 12:15 schrieb Daniel James:
    It's a Samsung 2443BW made (in Romania!) in 2008. Fairly old and I'm
    tempted just to chuck it ... but I'd always rather repair something than
    put it into landfill if it can be saved.

    Open it and check all capacitors.
    If they are bulged, replace all of the type that is bulged.
    --
    Gru|f
    Marco

    Spam bitte an abfalleimer2001@stinkedores.dorfdsl.de
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel James@daniel@me.invalid to uk.comp.homebuilt on Sat Oct 31 14:03:02 2026
    From Newsgroup: uk.comp.homebuilt

    On 29/10/2026 15:09, Marco Moock wrote:
    Open it and check all capacitors.
    If they are bulged, replace all of the type that is bulged.

    That was my plan. I found time to try it this morning.

    The caps all look fine, but one solder joint - one of the pins of the
    inverter transformer - looked dark and dry. I resoldered it and
    reassembled the monitor, plugged it in (with no source attached) and immediately (once I'd remembered to switch it on, anyway) saw the
    alternating Analog/Digital messages on screen as it hunted for an input.

    Now connected to a spare PC for a longer test. So far it seems to be
    working again as it should (touch wood).

    Thanks again to everyone who chipped in.
    --
    Cheers,
    Daniel.
    --- Synchronet 3.22a-Linux NewsLink 1.2