• Disk capacities

    From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 04:10:20 2026
    From Newsgroup: sci.electronics.design

    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to sci.electronics.design on Sat Nov 14 12:13:23 2026
    From Newsgroup: sci.electronics.design

    On 14/11/2026 11:10, Don Y wrote:
    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Larger drives in the 20-40Tbyte range have much closer ratios.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 05:23:25 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 5:13 AM, John R Walliker wrote:
    On 14/11/2026 11:10, Don Y wrote:
    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Larger drives in the 20-40Tbyte range have much closer ratios.

    Which suggest they are approaching the limits of the technology.
    At THAT point.

    So, why not a wider variety at lower capacities where, one assumes, they
    have more "wiggle room" in their offerings??
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to sci.electronics.design on Sat Nov 14 12:37:40 2026
    From Newsgroup: sci.electronics.design

    Don Y <blockedofcourse@foo.invalid> wrote:
    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Typically there's a certain number of bits you can store per platter. eg
    let's say it's 1T per side.

    One read head on one platter gets you 1T
    Two read heads on both sides of one platter gets you 2T
    Two platters with four heads gets you 4T
    Four platters with eight heads gets you 8T

    etc etc.

    It's not worth retooling for a new generation for only a minor bump to 1.1T
    per platter, so these models hang around until somebody can manage 1.5T per platter, then we get 1.5T/3T/6T/12T. Then the next bump is to 2T per
    platter so 2T/4T/8T/16T. Rinse and repeat.

    Apart from the largest sizes, there's always an upgrade path within the generation: ie instead of waiting for the new generation to upgrade from 1T
    to 1.5T, you can upgrade to the next step of 2T in the current generation. This is much lower cost for the vendor (no retooling, just the extra platters/heads).

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 05:57:25 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 5:37 AM, Theo wrote:
    Don Y <blockedofcourse@foo.invalid> wrote:
    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Typically there's a certain number of bits you can store per platter. eg let's say it's 1T per side.

    One read head on one platter gets you 1T
    Two read heads on both sides of one platter gets you 2T
    Two platters with four heads gets you 4T
    Four platters with eight heads gets you 8T

    etc etc.

    It's not worth retooling for a new generation for only a minor bump to 1.1T per platter, so these models hang around until somebody can manage 1.5T per platter, then we get 1.5T/3T/6T/12T. Then the next bump is to 2T per
    platter so 2T/4T/8T/16T. Rinse and repeat.

    Apart from the largest sizes, there's always an upgrade path within the generation: ie instead of waiting for the new generation to upgrade from 1T to 1.5T, you can upgrade to the next step of 2T in the current generation. This is much lower cost for the vendor (no retooling, just the extra platters/heads).
    But what manufacturing issue determines 1.0T vs 1.1T?
    Magnetic domains don't have physical boundaries that
    have to be reshaped.

    I.e., why "settle" on 1T (per platter/device/etc) and not 1.2T?
    Platter dimensions aren't being tweeked so why the "coincidence"
    in the capacities available?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Theo@theom+news@chiark.greenend.org.uk to sci.electronics.design on Sat Nov 14 15:10:24 2026
    From Newsgroup: sci.electronics.design

    Don Y <blockedofcourse@foo.invalid> wrote:
    On 11/14/2026 5:37 AM, Theo wrote:

    Apart from the largest sizes, there's always an upgrade path within the generation: ie instead of waiting for the new generation to upgrade from 1T to 1.5T, you can upgrade to the next step of 2T in the current generation. This is much lower cost for the vendor (no retooling, just the extra platters/heads).
    But what manufacturing issue determines 1.0T vs 1.1T?
    Magnetic domains don't have physical boundaries that
    have to be reshaped.

    I.e., why "settle" on 1T (per platter/device/etc) and not 1.2T?
    Platter dimensions aren't being tweeked so why the "coincidence"
    in the capacities available?

    You need a certain amount of 'raw' data for servo information and for blocks reallocated due to errors. Since round numbers are better for marketing (1T not 1.134T) I expect those hidden areas can vary in size so as to make the advertised capacity a round number.

    For operators of multi-disc arrays, having a non-round size is a bug not a feature. If the 1.134T drive in an array fails, you need another 1.134T
    or larger drive to replace it. The competitor's 1.132T drive won't do.

    Theo
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Edward Rawde@invalid@invalid.invalid to sci.electronics.design on Sat Nov 14 11:45:00 2026
    From Newsgroup: sci.electronics.design

    "Don Y" <blockedofcourse@foo.invalid> wrote in message news:11d9fj1$1smpj$1@dont-email.me...
    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Yes. The next version has to be twice as good as the previous version and
    1TB (I'm surprised it's not 1000GB) is twice as good as 500GB. Isn't it?

    Also it's perfectly reasonable to charge twice the price for twice the storage capacity. Isn't it?


    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 10:10:33 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 8:10 AM, Theo wrote:
    Don Y <blockedofcourse@foo.invalid> wrote:
    On 11/14/2026 5:37 AM, Theo wrote:

    Apart from the largest sizes, there's always an upgrade path within the
    generation: ie instead of waiting for the new generation to upgrade from 1T >>> to 1.5T, you can upgrade to the next step of 2T in the current generation. >>> This is much lower cost for the vendor (no retooling, just the extra
    platters/heads).
    But what manufacturing issue determines 1.0T vs 1.1T?
    Magnetic domains don't have physical boundaries that
    have to be reshaped.

    I.e., why "settle" on 1T (per platter/device/etc) and not 1.2T?
    Platter dimensions aren't being tweeked so why the "coincidence"
    in the capacities available?

    You need a certain amount of 'raw' data for servo information and for blocks reallocated due to errors. Since round numbers are better for marketing (1T not 1.134T) I expect those hidden areas can vary in size so as to make the advertised capacity a round number.

    So, no "value" to having a larger capacity.

    Amusingly, I have seen 1T drives and 1000GB drives from the same vendor
    (with the same capacity); marketeering?

    For operators of multi-disc arrays, having a non-round size is a bug not a feature. If the 1.134T drive in an array fails, you need another 1.134T
    or larger drive to replace it. The competitor's 1.132T drive won't do.
    Yes, hence the creation of DSO.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 10:21:24 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 9:45 AM, Edward Rawde wrote:
    Yes. The next version has to be twice as good as the previous version and
    1TB (I'm surprised it's not 1000GB) is twice as good as 500GB. Isn't it?

    Often, such models are available concurrently so its a question of
    what the company decided to "push".

    Also it's perfectly reasonable to charge twice the price for twice the storage
    capacity. Isn't it?

    IME (admittedly sorely out of date as I haven't paid for kit in decades),
    the cost of storage media has dropped (price per bit/spindle) considerably.
    I recall paying $10K for ten 4G (that's a G, not a T) disks, ages ago.

    And, the media is considerably more durable -- I've seen drives with ~100K PoH and *no* grown defects!

    Remember when drives were mounted on overdesigned "shock mounts" out of
    fear the slightest jarring would crash the disk?
    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to sci.electronics.design on Sat Nov 14 10:23:56 2026
    From Newsgroup: sci.electronics.design

    On Sat, 14 Nov 2026 04:10:20 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Certainly. Customers and end users prefer easily digestible whole
    numbers. Anything that require math to understand, such as decimal
    arithmetic, turns off the GUM (great unwashed masses). Western Dismal
    makes it even simpler for buyers using color coding.

    Large numbers sell better than small numbers. There's about a 25%
    increase in drive capacity when changing from CMR (conventional
    magnetic recording) to SMR (shingled magnetic recording): <https://buffaloamericas.com/resources/cmr-vs-smr-hard-drives-in-network-attached-storage-nas-msp>

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long
    lead times are causing buyers to buy almost anything that spins. The
    increases in HDD capacity are causing a drop in the number of drives
    shipped: <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of
    minor differences in price.
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to sci.electronics.design on Sat Nov 14 10:44:16 2026
    From Newsgroup: sci.electronics.design

    On Sat, 14 Nov 2026 10:10:33 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    Amusingly, I have seen 1T drives and 1000GB drives from the same vendor
    (with the same capacity); marketeering?

    Is that decimal or binary TB?

    "Why does my hard drive report less capacity than indicated on the
    drive's label?" <https://www.seagate.com/support/kb/why-does-my-hard-drive-report-less-capacity-than-indicated-on-the-drives-label-172191en/>

    "Storage capacity measurement standards" <https://www.seagate.com/support/kb/storage-capacity-measurement-standards-002046en/>

    Occam's Razor. The simplest explanation is the manufacturer ran out
    of space on the label. 1T occupies less printing area on the label
    than 1000GB.

    There was a time, when HD manufactures provided labels with everything
    EXCEPT the drive capacity. These drives had the heads, tracks,
    cylinders, platters, sectors/track, but not total capacity.
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Edward Rawde@invalid@invalid.invalid to sci.electronics.design on Sat Nov 14 14:07:28 2026
    From Newsgroup: sci.electronics.design

    "Don Y" <blockedofcourse@foo.invalid> wrote in message news:11da5ao$2489f$1@dont-email.me...
    On 11/14/2026 9:45 AM, Edward Rawde wrote:
    Yes. The next version has to be twice as good as the previous version and
    1TB (I'm surprised it's not 1000GB) is twice as good as 500GB. Isn't it?

    Often, such models are available concurrently so its a question of
    what the company decided to "push".

    Sure but the buyer will see something twice as big.
    And twice as big is twice as good. Isn't it?


    Also it's perfectly reasonable to charge twice the price for twice the storage
    capacity. Isn't it?

    IME (admittedly sorely out of date as I haven't paid for kit in decades),
    the cost of storage media has dropped (price per bit/spindle) considerably.
    I recall paying $10K for ten 4G (that's a G, not a T) disks, ages ago.

    It seems to have reached a turning point and is now increasing again.
    Probably because you shouldn't need storage at home.
    It should be in the "cloud". Shouldn't it?


    And, the media is considerably more durable -- I've seen drives with ~100K PoH
    and *no* grown defects!

    Remember when drives were mounted on overdesigned "shock mounts" out of
    fear the slightest jarring would crash the disk?

    I remember disks which had to be pulled out of a unit which looked like
    a top loading washing machine.

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.





    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to sci.electronics.design on Sat Nov 14 19:15:20 2026
    From Newsgroup: sci.electronics.design

    On 14/11/2026 18:23, Jeff Liebermann wrote:
    On Sat, 14 Nov 2026 04:10:20 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Certainly. Customers and end users prefer easily digestible whole
    numbers. Anything that require math to understand, such as decimal arithmetic, turns off the GUM (great unwashed masses). Western Dismal
    makes it even simpler for buyers using color coding.

    Large numbers sell better than small numbers. There's about a 25%
    increase in drive capacity when changing from CMR (conventional
    magnetic recording) to SMR (shingled magnetic recording): <https://buffaloamericas.com/resources/cmr-vs-smr-hard-drives-in-network-attached-storage-nas-msp>

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long
    lead times are causing buyers to buy almost anything that spins. The increases in HDD capacity are causing a drop in the number of drives
    shipped: <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of
    minor differences in price.

    There are some advantages to having a small number of well defined
    drive sizes.
    Recently I wanted to make an image backup of the 2Tbyte SSD (*) in my
    laptop PC. I have lots of ex data-centre drives, many of which
    are "2Tbyte".
    It turned out that the SSD capacity was EXACTLY the same number of
    bytes as the spinning disks,so the image fitted perfectly.

    * I bought the SSD before prices became stupidly expensive.
    John

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 13:15:22 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 11:44 AM, Jeff Liebermann wrote:
    On Sat, 14 Nov 2026 10:10:33 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    Amusingly, I have seen 1T drives and 1000GB drives from the same vendor
    (with the same capacity); marketeering?

    Is that decimal or binary TB?

    Every drive manufacturer makes it clear that a terabyte is 1000 billion bytes.

    "Why does my hard drive report less capacity than indicated on the
    drive's label?" <https://www.seagate.com/support/kb/why-does-my-hard-drive-report-less-capacity-than-indicated-on-the-drives-label-172191en/>

    "Storage capacity measurement standards" <https://www.seagate.com/support/kb/storage-capacity-measurement-standards-002046en/>

    Occam's Razor. The simplest explanation is the manufacturer ran out
    of space on the label. 1T occupies less printing area on the label
    than 1000GB.

    There was a time, when HD manufactures provided labels with everything
    EXCEPT the drive capacity. These drives had the heads, tracks,
    cylinders, platters, sectors/track, but not total capacity.

    Current drives often have the capacity "hidden" on the label.
    Really? Is there something else that is more important to
    put on the label??

    HGST drives tend to be well labeled -- nominal geometry (which, long ago,
    lost all meaning), LBA, capacity, interface type, rpm, power requirements, firmware, date of manufacture, S/N, etc.

    Along with a dozen logos/certification marks that waste a disproportionate amount of space...


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 13:18:51 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 11:23 AM, Jeff Liebermann wrote:
    On Sat, 14 Nov 2026 04:10:20 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Certainly. Customers and end users prefer easily digestible whole
    numbers. Anything that require math to understand, such as decimal arithmetic, turns off the GUM (great unwashed masses). Western Dismal
    makes it even simpler for buyers using color coding.

    The coloration indicates other drive characteristics beyond
    capacity (Red drives for NAS use, Blue consumer, Black enterprise,
    green power saving, gold... )

    Large numbers sell better than small numbers. There's about a 25%
    increase in drive capacity when changing from CMR (conventional
    magnetic recording) to SMR (shingled magnetic recording): <https://buffaloamericas.com/resources/cmr-vs-smr-hard-drives-in-network-attached-storage-nas-msp>

    Shingled recording takes a performance hit. (and, likely, a
    data reliability hit). It is really only useful for "write seldom" applications (like large consumer external disks acting as archival
    storage).

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long
    lead times are causing buyers to buy almost anything that spins. The increases in HDD capacity are causing a drop in the number of drives
    shipped: <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of
    minor differences in price.
    But, that doesn't address historical trends.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 13:35:57 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 12:07 PM, Edward Rawde wrote:
    "Don Y" <blockedofcourse@foo.invalid> wrote in message news:11da5ao$2489f$1@dont-email.me...
    On 11/14/2026 9:45 AM, Edward Rawde wrote:
    Yes. The next version has to be twice as good as the previous version and >>> 1TB (I'm surprised it's not 1000GB) is twice as good as 500GB. Isn't it?

    Often, such models are available concurrently so its a question of
    what the company decided to "push".

    Sure but the buyer will see something twice as big.
    And twice as big is twice as good. Isn't it?

    The amusing question is why PC vendors don't opt for larger
    drives in their offerings. At their buying quantities, I
    would imagine doubling the size would cost next to nothing.

    Also it's perfectly reasonable to charge twice the price for twice the storage
    capacity. Isn't it?

    IME (admittedly sorely out of date as I haven't paid for kit in decades),
    the cost of storage media has dropped (price per bit/spindle) considerably. >> I recall paying $10K for ten 4G (that's a G, not a T) disks, ages ago.

    It seems to have reached a turning point and is now increasing again. Probably because you shouldn't need storage at home.
    It should be in the "cloud". Shouldn't it?

    It could be that SSDs are now replacing rust drives.

    And, the media is considerably more durable -- I've seen drives with ~100K PoH
    and *no* grown defects!

    Remember when drives were mounted on overdesigned "shock mounts" out of
    fear the slightest jarring would crash the disk?

    I remember disks which had to be pulled out of a unit which looked like
    a top loading washing machine.

    RK07? I used to have an "in" at DECs Maynard facility -- free reign
    of the "scrap" room. I recall seeing a pair of these where the disk (pack)
    had crashed "spectacularly". It's one thing to rotate a tiny platter at
    15KRPM but entirely different to rotate a massive *pack*!

    [IIRC, someone made a 3D display out of one of these by mounting a plane of LEDs on it and sequencing them as it revolved]

    I had a *fixed* disk drive (RS03, IIRC) that had 512KB (that's a 'K') of capacity effectively WORD ADDRESSABLE -- at about 500KHz. It weighed
    a bit over 100 pounds and would dim the lights when starting.

    *AND*, I considered myself PRIVILEGED to have such a thing! <rolls eyes>

    One thing I learned, early on, was never to buy things as they were
    obsoleted too quickly!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 13:40:57 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 12:15 PM, John R Walliker wrote:
    There are some advantages to having a small number of well defined
    drive sizes.
    Recently I wanted to make an image backup of the 2Tbyte SSD (*) in my
    laptop PC. I have lots of ex data-centre drives, many of which
    are "2Tbyte".
    It turned out that the SSD capacity was EXACTLY the same number of
    bytes as the spinning disks,so the image fitted perfectly.

    I store images in compressed form -- along with a hash to reassure me
    of their integrity. A smart image creator doesn't bother storing
    unused portions of the medium (it has to be filesystem-aware to do so).

    E.g., I store several iterations of the "build process" when creating
    a new Windows box -- on a 250G disk even thought he system may
    have a 1T drive within. (this is a win if I botch the install and
    want to rollback to "just after the drivers were installed" or
    "just before installing the drivers" or...)

    One can usually install an image onto a larger medium and "enlarge"
    the filesystem to fit.

    Depending on what is where, you can also often SHRINK a filesystem
    to fit on a smaller medium.

    * I bought the SSD before prices became stupidly expensive.
    John


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to sci.electronics.design on Sat Nov 14 13:09:19 2026
    From Newsgroup: sci.electronics.design

    On Sat, 14 Nov 2026 13:18:51 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    On 11/14/2026 11:23 AM, Jeff Liebermann wrote:
    On Sat, 14 Nov 2026 04:10:20 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Certainly. Customers and end users prefer easily digestible whole
    numbers. Anything that require math to understand, such as decimal
    arithmetic, turns off the GUM (great unwashed masses). Western Dismal
    makes it even simpler for buyers using color coding.

    The coloration indicates other drive characteristics beyond
    capacity (Red drives for NAS use, Blue consumer, Black enterprise,
    green power saving, gold... )

    Standardized color coded HDD are a good thing. Every company should
    have it's own standard.
    <https://www.datahoards.com/hard-drive-colors/#Summary>
    I wonder what it would be like if every resistor manufactory had its
    own color code?

    Large numbers sell better than small numbers. There's about a 25%
    increase in drive capacity when changing from CMR (conventional
    magnetic recording) to SMR (shingled magnetic recording):
    <https://buffaloamericas.com/resources/cmr-vs-smr-hard-drives-in-network-attached-storage-nas-msp>

    Shingled recording takes a performance hit. (and, likely, a
    data reliability hit). It is really only useful for "write seldom" >applications (like large consumer external disks acting as archival
    storage).

    Yep. SMR (shingled) drives are amazingly horrible resyncing RAID
    arrays. Some HDD manufacturers were caught selling SMR drives largely
    by hiding any information as to whether it was shingles or
    conventional. <https://www.slashgear.com/wd-seagate-toshiba-allegedly-sell-smr-drives-without-telling-buyers-17617133/>
    <https://arstechnica.com/gadgets/2020/05/western-digital-gets-sued-for-sneaking-smr-disks-into-its-nas-channel/>

    However, drive manufacturers seem to have discovered the benefits of
    not including any information on the drive label:
    "More used Seagate HDDs disguised as new: Fraudsters make it tough to
    spot the difference" <https://arstechnica.com/gadgets/2020/05/western-digital-gets-sued-for-sneaking-smr-disks-into-its-nas-channel/>
    <https://www.tomshardware.com/pc-components/hdds/seagates-fraudulent-hard-drives-scandal-deepens-as-clues-point-at-chinese-chia-mining-farms>

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long
    lead times are causing buyers to buy almost anything that spins. The
    increases in HDD capacity are causing a drop in the number of drives
    shipped:
    <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of
    minor differences in price.

    But, that doesn't address historical trends.

    I didn't want to post every graph I found showing sales by unit,
    capacity, market segment, withdrawn for internal use, refurbished,
    etc. Which historical trend would you like to see addressed where I
    failed to address my observation that a volatile and demand driven
    market is a bad time to compete on selling price?
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Edward Rawde@invalid@invalid.invalid to sci.electronics.design on Sat Nov 14 16:12:45 2026
    From Newsgroup: sci.electronics.design

    "Don Y" <blockedofcourse@foo.invalid> wrote in message news:11dagnh$28bvo$1@dont-email.me...
    On 11/14/2026 12:07 PM, Edward Rawde wrote:
    "Don Y" <blockedofcourse@foo.invalid> wrote in message news:11da5ao$2489f$1@dont-email.me...
    On 11/14/2026 9:45 AM, Edward Rawde wrote:
    Yes. The next version has to be twice as good as the previous version and >>>> 1TB (I'm surprised it's not 1000GB) is twice as good as 500GB. Isn't it? >>>
    Often, such models are available concurrently so its a question of
    what the company decided to "push".

    Sure but the buyer will see something twice as big.
    And twice as big is twice as good. Isn't it?

    The amusing question is why PC vendors don't opt for larger
    drives in their offerings

    Marketing again.
    Drive? What's that? Is that the memory where my pictures are stored?
    Or is that the cloud?

    . At their buying quantities, I
    would imagine doubling the size would cost next to nothing.

    Also it's perfectly reasonable to charge twice the price for twice the storage
    capacity. Isn't it?

    IME (admittedly sorely out of date as I haven't paid for kit in decades), >>> the cost of storage media has dropped (price per bit/spindle) considerably. >>> I recall paying $10K for ten 4G (that's a G, not a T) disks, ages ago.

    It seems to have reached a turning point and is now increasing again.
    Probably because you shouldn't need storage at home.
    It should be in the "cloud". Shouldn't it?

    It could be that SSDs are now replacing rust drives.

    They are, but I expect that data centres want a lot of them.


    And, the media is considerably more durable -- I've seen drives with ~100K PoH
    and *no* grown defects!

    Remember when drives were mounted on overdesigned "shock mounts" out of
    fear the slightest jarring would crash the disk?

    I remember disks which had to be pulled out of a unit which looked like
    a top loading washing machine.

    RK07?

    Yes, something like that.

    I used to have an "in" at DECs Maynard facility -- free reign
    of the "scrap" room. I recall seeing a pair of these where the disk (pack) had crashed "spectacularly". It's one thing to rotate a tiny platter at 15KRPM but entirely different to rotate a massive *pack*!

    [IIRC, someone made a 3D display out of one of these by mounting a plane of LEDs on it and sequencing them as it revolved]

    I had a *fixed* disk drive (RS03, IIRC) that had 512KB (that's a 'K') of capacity effectively WORD ADDRESSABLE -- at about 500KHz. It weighed
    a bit over 100 pounds and would dim the lights when starting.

    *AND*, I considered myself PRIVILEGED to have such a thing! <rolls eyes>

    One thing I learned, early on, was never to buy things as they were
    obsoleted too quickly!


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Carlos E.R.@robin_listas@es.invalid to sci.electronics.design on Sat Nov 14 22:29:29 2026
    From Newsgroup: sci.electronics.design

    On 2026-11-14 13:57, Don Y wrote:
    On 11/14/2026 5:37 AM, Theo wrote:
    Don Y <blockedofcourse@foo.invalid> wrote:
    One can understand why semiconductor memory tends to follow certain
    size patterns.

    But, there is no similar constraint on spinning rust (or, SSDs,
    for that matter).

    So, why do disk sizes seem to follow a particular pattern?

    250G, 500G, 1T, 2T, 4T, 8T, etc.?

    Yes, there are some oddballs in the mix -- 320G, 640G, 750G, 1.5T,
    3T, 14T, etc. -- but, for the most part, the "doubling" ratio seems
    most common.

    Marketing?

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Typically there's a certain number of bits you can store per platter.-a eg >> let's say it's 1T per side.

    One read head on one platter gets you 1T
    Two read heads on both sides of one platter gets you 2T
    Two platters with four heads gets you 4T
    Four platters with eight heads gets you 8T

    etc etc.

    It's not worth retooling for a new generation for only a minor bump to
    1.1T
    per platter, so these models hang around until somebody can manage
    1.5T per
    platter, then we get 1.5T/3T/6T/12T.-a Then the next bump is to 2T per
    platter so 2T/4T/8T/16T. Rinse and repeat.

    Apart from the largest sizes, there's always an upgrade path within the
    generation: ie instead of waiting for the new generation to upgrade
    from 1T
    to 1.5T, you can upgrade to the next step of 2T in the current
    generation.
    This is much lower cost for the vendor (no retooling, just the extra
    platters/heads).
    But what manufacturing issue determines 1.0T vs 1.1T?
    Magnetic domains don't have physical boundaries that
    have to be reshaped.

    I.e., why "settle" on 1T (per platter/device/etc) and not 1.2T?
    Platter dimensions aren't being tweeked so why the "coincidence"
    in the capacities available?

    Available technology.

    You develop a technology that allows a certain density of data per inch.
    Well, the diameter of the plate is given, so the size in bytes of a
    plate is thus given, not arbitrary.
    --
    Cheers, Carlos.
    ESEfc-Efc+, EUEfc-Efc|;
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 15:49:31 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 2:29 PM, Carlos E.R. wrote:
    I.e., why "settle" on 1T (per platter/device/etc) and not 1.2T?
    Platter dimensions aren't being tweeked so why the "coincidence"
    in the capacities available?

    Available technology.

    You develop a technology that allows a certain density of data per inch. Well,
    the diameter of the plate is given, so the size in bytes of a plate is thus given, not arbitrary.

    But, just so happens to end up a "nice number"?

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to sci.electronics.design on Sat Nov 14 22:58:23 2026
    From Newsgroup: sci.electronics.design

    On 14/11/2026 20:40, Don Y wrote:
    On 11/14/2026 12:15 PM, John R Walliker wrote:
    There are some advantages to having a small number of well defined
    drive sizes.
    Recently I wanted to make an image backup of the 2Tbyte SSD (*) in my
    laptop PC. I have lots of ex data-centre drives, many of which
    are "2Tbyte".
    It turned out that the SSD capacity was EXACTLY the same number of
    bytes as the spinning disks,so the image fitted perfectly.

    I store images in compressed form -- along with a hash to reassure me
    of their integrity.-a A smart image creator doesn't bother storing
    unused portions of the medium (it has to be filesystem-aware to do so).

    I don't use smart image creators. I just use dd. Then sha256sum on the original and the copy.

    E.g., I store several iterations of the "build process" when creating
    a new Windows box -- on a 250G disk even thought he system may
    have a 1T drive within.-a (this is a win if I botch the install and
    want to rollback to "just after the drivers were installed" or
    "just before installing the drivers" or...)

    One can usually install an image onto a larger medium and "enlarge"
    the filesystem to fit.

    Depending on what is where, you can also often SHRINK a filesystem
    to fit on a smaller medium.

    * I bought the SSD before prices became stupidly expensive.
    John



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 16:46:20 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 3:58 PM, John R Walliker wrote:
    On 14/11/2026 20:40, Don Y wrote:
    On 11/14/2026 12:15 PM, John R Walliker wrote:
    There are some advantages to having a small number of well defined
    drive sizes.
    Recently I wanted to make an image backup of the 2Tbyte SSD (*) in my
    laptop PC. I have lots of ex data-centre drives, many of which
    are "2Tbyte".
    It turned out that the SSD capacity was EXACTLY the same number of
    bytes as the spinning disks,so the image fitted perfectly.

    I store images in compressed form -- along with a hash to reassure me
    of their integrity.-a A smart image creator doesn't bother storing
    unused portions of the medium (it has to be filesystem-aware to do so).

    I don't use smart image creators.-a I just use dd.-a Then sha256sum on the original and the copy.
    Clonezilla is a handy tool to have in your kit. Almost foolproof
    in operations (once you've been through it a time or two).

    By crating small/compressed images, you can preserve more of them
    without losing information. And, can restore them much faster than
    dd(1)-ing an image (that is likely largely empty) onto a fresh medium.

    E.g., it takes about 3 hours for me to:
    dd if=/dev/zero of=/dev/daX bs=1024k
    for a 2T disk. Double that for 4T. Double again for 8T.

    But, to restore the image of the actual *active content*
    on that disk can take as little as several minutes
    (10GB/minute), regardless of the target disk size.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 17:09:10 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 2:12 PM, Edward Rawde wrote:
    Sure but the buyer will see something twice as big.
    And twice as big is twice as good. Isn't it?

    The amusing question is why PC vendors don't opt for larger
    drives in their offerings

    Marketing again.
    Drive? What's that? Is that the memory where my pictures are stored?
    Or is that the cloud?

    There are very few criteria that are simple enough for a potential
    purchaser to use to evaluate one PC over another. Disk size,
    amount of RAM, CPU family/speed and physical size.

    Omitting one of them makes you seem less different from your competitors
    (fine if you are at the bottom of the price stack but bad, otherwise)

    Also it's perfectly reasonable to charge twice the price for twice the storage
    capacity. Isn't it?

    IME (admittedly sorely out of date as I haven't paid for kit in decades), >>>> the cost of storage media has dropped (price per bit/spindle) considerably.
    I recall paying $10K for ten 4G (that's a G, not a T) disks, ages ago.

    It seems to have reached a turning point and is now increasing again.
    Probably because you shouldn't need storage at home.
    It should be in the "cloud". Shouldn't it?

    It could be that SSDs are now replacing rust drives.

    They are, but I expect that data centres want a lot of them.

    No idea. I regularly rescue disk shelfs so there are folks discarding them while others might be looking for them.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 17:12:37 2026
    From Newsgroup: sci.electronics.design

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long
    lead times are causing buyers to buy almost anything that spins. The
    increases in HDD capacity are causing a drop in the number of drives
    shipped:
    <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of
    minor differences in price.

    But, that doesn't address historical trends.

    I didn't want to post every graph I found showing sales by unit,
    capacity, market segment, withdrawn for internal use, refurbished,
    etc. Which historical trend would you like to see addressed where I
    failed to address my observation that a volatile and demand driven
    market is a bad time to compete on selling price?
    The issue was disk capacities. Historically, the same rough "doubling"
    of capacities has been the trend.

    I recall 4G drives. Then 9G. 18G, 36G, 72G, 146G, 300G, 600G, 500G,
    1T, 2T, 4T, 8T, etc.

    No 19G or 310G drives. No 7T.

    Regardless of price or quantities sold.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Carlos E.R.@robin_listas@es.invalid to sci.electronics.design on Sun Nov 15 02:10:57 2026
    From Newsgroup: sci.electronics.design

    On 2026-11-14 23:49, Don Y wrote:
    On 11/14/2026 2:29 PM, Carlos E.R. wrote:
    I.e., why "settle" on 1T (per platter/device/etc) and not 1.2T?
    Platter dimensions aren't being tweeked so why the "coincidence"
    in the capacities available?

    Available technology.

    You develop a technology that allows a certain density of data per
    inch. Well, the diameter of the plate is given, so the size in bytes
    of a plate is thus given, not arbitrary.

    But, just so happens to end up a "nice number"?


    No, they develop the technology for it.

    They have a technology that gets, say, 500GB per platter, so they work
    on improving the technology to get them 1000GB per platter, then they
    produce with it.
    --
    Cheers, Carlos.
    ESEfc-Efc+, EUEfc-Efc|;
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to sci.electronics.design on Sat Nov 14 18:37:12 2026
    From Newsgroup: sci.electronics.design

    On Sat, 14 Nov 2026 16:46:20 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    On 11/14/2026 3:58 PM, John R Walliker wrote:
    On 14/11/2026 20:40, Don Y wrote:
    I don't use smart image creators.a I just use dd.a Then sha256sum on the
    original and the copy.

    Clonezilla is a handy tool to have in your kit. Almost foolproof
    in operations (once you've been through it a time or two).

    A GUI (graphical user interface) should make backups and restores
    easier:
    <https://rescuezilla.com>
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to sci.electronics.design on Sat Nov 14 19:03:19 2026
    From Newsgroup: sci.electronics.design

    On Sat, 14 Nov 2026 17:12:37 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long >>>> lead times are causing buyers to buy almost anything that spins. The
    increases in HDD capacity are causing a drop in the number of drives
    shipped:
    <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of >>>> minor differences in price.

    But, that doesn't address historical trends.

    I didn't want to post every graph I found showing sales by unit,
    capacity, market segment, withdrawn for internal use, refurbished,
    etc. Which historical trend would you like to see addressed where I
    failed to address my observation that a volatile and demand driven
    market is a bad time to compete on selling price?

    The issue was disk capacities. Historically, the same rough "doubling"
    of capacities has been the trend.

    I asked for the "historical trend" which you claimed that my comments
    did not "address". Instead, you provided a disk size "issue" which
    could be explained as an exercise in rounding and truncating long
    strings of numbers. When one has a drive with a trillion bits, a few
    missing or surplus bits are of little importance.

    I recall 4G drives. Then 9G. 18G, 36G, 72G, 146G, 300G, 600G, 500G,
    1T, 2T, 4T, 8T, etc.

    No 19G or 310G drives. No 7T.

    Regardless of price or quantities sold.

    Are you suggesting that drive capacity should be selected by
    intelligent design instead of natural selection? Intelligent design
    might yield a few cool interesting patterns and magical numbers.
    However, natural selection simple scans the platters for errors, fills
    them with some number of bits that the platters can safely hold, saves
    some bits for error correction, and reserves some bits for wear
    leveling and uncorrectable errors. The idea is to maximize the number
    of usable bits over each platter. Such a scheme is unlikely to
    produce your short and convenient disk capacity numbers.
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 20:14:31 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 7:37 PM, Jeff Liebermann wrote:
    On Sat, 14 Nov 2026 16:46:20 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    On 11/14/2026 3:58 PM, John R Walliker wrote:
    On 14/11/2026 20:40, Don Y wrote:
    I don't use smart image creators.-a I just use dd.-a Then sha256sum on the >>> original and the copy.

    Clonezilla is a handy tool to have in your kit. Almost foolproof
    in operations (once you've been through it a time or two).

    A GUI (graphical user interface) should make backups and restores
    easier:
    <https://rescuezilla.com>

    CZ live has a text based "GUI". No mouse needed, options are enabled/disabled via checkboxes (tab to select, hit space to toggle)

    Most of the defaults have been carefully selected to "just work".

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sat Nov 14 23:06:14 2026
    From Newsgroup: sci.electronics.design

    On 11/14/2026 8:03 PM, Jeff Liebermann wrote:
    On Sat, 14 Nov 2026 17:12:37 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long >>>>> lead times are causing buyers to buy almost anything that spins. The >>>>> increases in HDD capacity are causing a drop in the number of drives >>>>> shipped:
    <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of >>>>> minor differences in price.

    But, that doesn't address historical trends.

    I didn't want to post every graph I found showing sales by unit,
    capacity, market segment, withdrawn for internal use, refurbished,
    etc. Which historical trend would you like to see addressed where I
    failed to address my observation that a volatile and demand driven
    market is a bad time to compete on selling price?

    The issue was disk capacities. Historically, the same rough "doubling"
    of capacities has been the trend.

    I asked for the "historical trend" which you claimed that my comments
    did not "address".

    The thread is about disk capacities (sizes). So, HISTORICALLY, I
    contend that the 2X pattern has been in place for decades. I cited
    disk sizes of volumes I have personally owned and invite a discussion
    of other "oddball" sizes and why those saw a market share.

    Instead, you provided a disk size "issue" which
    could be explained as an exercise in rounding and truncating long
    strings of numbers. When one has a drive with a trillion bits, a few
    missing or surplus bits are of little importance.

    I recall 4G drives. Then 9G. 18G, 36G, 72G, 146G, 300G, 600G, 500G,
    1T, 2T, 4T, 8T, etc.

    No 19G or 310G drives. No 7T.

    Regardless of price or quantities sold.

    Are you suggesting that drive capacity should be selected by
    intelligent design instead of natural selection?

    No. I asked why the sizes always (including historically) seem
    to follow a particular pattern/progression. Why 5TB drives
    aren't common, considering they have some additional appeal
    beyond 4TB drives (presumably at a lower price point than 8TB)

    The RS03 became the RS04 by making use of the "other side"
    of the platter. So, you expected its capacity to be twice that
    of the '03.

    I don't see that to be the case with modern drives -- the
    "back side" is already in use. And, there is a limit
    as to how many additional platters you can squeeze into
    the case.

    Intelligent design
    might yield a few cool interesting patterns and magical numbers.
    However, natural selection simple scans the platters for errors, fills
    them with some number of bits that the platters can safely hold, saves
    some bits for error correction, and reserves some bits for wear
    leveling and uncorrectable errors. The idea is to maximize the number
    of usable bits over each platter. Such a scheme is unlikely to
    produce your short and convenient disk capacity numbers.



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Sun Nov 15 13:37:45 2026
    From Newsgroup: sci.electronics.design

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion
    bytes.

    Is that an American billion (billiard) or a real English billion (a bi-million)?
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sun Nov 15 07:01:25 2026
    From Newsgroup: sci.electronics.design

    On 11/15/2026 6:37 AM, Liz Tuddenham wrote:
    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion
    bytes.

    Is that an American billion (billiard) or a real English billion (a bi-million)?
    Being an american, it is the former. 1000 GB
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@glen--canyon.com to sci.electronics.design on Sun Nov 15 07:43:02 2026
    From Newsgroup: sci.electronics.design

    On Sun, 15 Nov 2026 13:37:45 +0000, liz@poppyrecords.invalid.invalid
    (Liz Tuddenham) wrote:

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion >>bytes.

    Is that an American billion (billiard) or a real English billion (a >bi-million)?

    Thousand, million, billion, trillion, quadrillion.

    Steps of 1e3, like the SI prefixes K M G T P.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Johann 'Myrkraverk' Oskarsson@johann@myrkraverk.invalid to sci.electronics.design on Sun Nov 15 23:50:47 2026
    From Newsgroup: sci.electronics.design

    On 11/15/2026 11:43 PM, john larkin wrote:
    On Sun, 15 Nov 2026 13:37:45 +0000, liz@poppyrecords.invalid.invalid
    (Liz Tuddenham) wrote:

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion
    bytes.

    Is that an American billion (billiard) or a real English billion (a
    bi-million)?

    Thousand, million, billion, trillion, quadrillion.

    Steps of 1e3, like the SI prefixes K M G T P.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    And never mind the older generation of Brits who put "milliard" in there somewhere.
    --
    Johann | email: invalid -> com | http://www.myrkraverk.com/blog/
    I'm not from the Internet, I just work there. | via Easynews.com https://bsky.app/profile/myrkraverk.bsky.social | for ( ;; ) _:;
    Federated at https://fed.brid.gy/bsky/myrkraverk.bsky.social
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@glen--canyon.com to sci.electronics.design on Sun Nov 15 08:39:42 2026
    From Newsgroup: sci.electronics.design

    On Sun, 15 Nov 2026 23:50:47 +0800, Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> wrote:

    On 11/15/2026 11:43 PM, john larkin wrote:
    On Sun, 15 Nov 2026 13:37:45 +0000, liz@poppyrecords.invalid.invalid
    (Liz Tuddenham) wrote:

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion >>>> bytes.

    Is that an American billion (billiard) or a real English billion (a
    bi-million)?

    Thousand, million, billion, trillion, quadrillion.

    Steps of 1e3, like the SI prefixes K M G T P.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    And never mind the older generation of Brits who put "milliard" in there >somewhere.

    That sounds like something bad to eat, like marmite.

    We have wonderful restaurants here in San Francisco. Italian, French, cajun-creole, bbq, thai, nepalese, mandarin, cantonese, mexican,
    portugese, eritrean, yucatan, pizza, all sorts of stuff. We like some neighborhood places like Regent Thai and United Dumplings and Go Duck
    Yourself.

    But there are no British or Irish or German restaurants. There is
    Cinderella, a Russian bakery.

    I think there is one kosher restaurant. It's awful.





    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Johann 'Myrkraverk' Oskarsson@johann@myrkraverk.invalid to sci.electronics.design on Mon Nov 16 00:54:19 2026
    From Newsgroup: sci.electronics.design

    On 11/16/2026 12:39 AM, john larkin wrote:
    On Sun, 15 Nov 2026 23:50:47 +0800, Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> wrote:

    On 11/15/2026 11:43 PM, john larkin wrote:
    On Sun, 15 Nov 2026 13:37:45 +0000, liz@poppyrecords.invalid.invalid
    (Liz Tuddenham) wrote:

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion >>>>> bytes.

    Is that an American billion (billiard) or a real English billion (a
    bi-million)?

    Thousand, million, billion, trillion, quadrillion.

    Steps of 1e3, like the SI prefixes K M G T P.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    And never mind the older generation of Brits who put "milliard" in there
    somewhere.

    That sounds like something bad to eat, like marmite.

    We have wonderful restaurants here in San Francisco. Italian, French, cajun-creole, bbq, thai, nepalese, mandarin, cantonese, mexican,
    portugese, eritrean, yucatan, pizza, all sorts of stuff. We like some neighborhood places like Regent Thai and United Dumplings and Go Duck Yourself.

    But there are no British or Irish or German restaurants. There is
    Cinderella, a Russian bakery.

    I think there is one kosher restaurant. It's awful.





    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    We have a German restaurant called Brotzeit. It's a chain with a few
    outlets, but it's far from common; unlike Texas Roadhouse and Fridays.
    --
    Johann | email: invalid -> com | http://www.myrkraverk.com/blog/
    I'm not from the Internet, I just work there. | via Easynews.com https://bsky.app/profile/myrkraverk.bsky.social | for ( ;; ) _:;
    Federated at https://fed.brid.gy/bsky/myrkraverk.bsky.social
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@glen--canyon.com to sci.electronics.design on Sun Nov 15 09:01:47 2026
    From Newsgroup: sci.electronics.design

    On Mon, 16 Nov 2026 00:54:19 +0800, Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> wrote:

    On 11/16/2026 12:39 AM, john larkin wrote:
    On Sun, 15 Nov 2026 23:50:47 +0800, Johann 'Myrkraverk' Oskarsson
    <johann@myrkraverk.invalid> wrote:

    On 11/15/2026 11:43 PM, john larkin wrote:
    On Sun, 15 Nov 2026 13:37:45 +0000, liz@poppyrecords.invalid.invalid
    (Liz Tuddenham) wrote:

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion >>>>>> bytes.

    Is that an American billion (billiard) or a real English billion (a
    bi-million)?

    Thousand, million, billion, trillion, quadrillion.

    Steps of 1e3, like the SI prefixes K M G T P.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    And never mind the older generation of Brits who put "milliard" in there >>> somewhere.

    That sounds like something bad to eat, like marmite.

    We have wonderful restaurants here in San Francisco. Italian, French,
    cajun-creole, bbq, thai, nepalese, mandarin, cantonese, mexican,
    portugese, eritrean, yucatan, pizza, all sorts of stuff. We like some
    neighborhood places like Regent Thai and United Dumplings and Go Duck
    Yourself.

    But there are no British or Irish or German restaurants. There is
    Cinderella, a Russian bakery.

    I think there is one kosher restaurant. It's awful.





    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    We have a German restaurant called Brotzeit. It's a chain with a few >outlets, but it's far from common; unlike Texas Roadhouse and Fridays.

    Is the Roadhouse any good? There's one east of here on I80.

    I remember a German restaurant in NYC that was good. Luchows. Roast
    goose. It's closed now.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Simon Simple@nothanks@nottoday.co.uk to sci.electronics.design on Sun Nov 15 17:30:30 2026
    From Newsgroup: sci.electronics.design

    On 15/11/2026 15:43, john larkin wrote:
    On Sun, 15 Nov 2026 13:37:45 +0000, liz@poppyrecords.invalid.invalid
    (Liz Tuddenham) wrote:

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion
    bytes.

    Is that an American billion (billiard) or a real English billion (a
    bi-million)?

    Thousand, million, billion, trillion, quadrillion.

    Steps of 1e3, like the SI prefixes K M G T P.
    ITYM k M G T P.

    K is kelvins.
    --
    SS

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to sci.electronics.design on Sun Nov 15 10:34:30 2026
    From Newsgroup: sci.electronics.design

    On Sat, 14 Nov 2026 23:06:14 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    On 11/14/2026 8:03 PM, Jeff Liebermann wrote:
    On Sat, 14 Nov 2026 17:12:37 -0700, Don Y
    <blockedofcourse@foo.invalid> wrote:

    Why don't we see manufacturers trying to nickel-and-dime each
    other -- 2.1T, 4.4T, etc.

    Rotating rust drives are in demand at AI data centers (due to a
    shortage of SSD drives). HDD volume and margins are decreasing. Long >>>>>> lead times are causing buyers to buy almost anything that spins. The >>>>>> increases in HDD capacity are causing a drop in the number of drives >>>>>> shipped:
    <https://www.statista.com/statistics/398951/global-shipment-figures-for-hard-disk-drives/>
    An uncertain market is not a good time to be competing on the basis of >>>>>> minor differences in price.

    But, that doesn't address historical trends.

    I didn't want to post every graph I found showing sales by unit,
    capacity, market segment, withdrawn for internal use, refurbished,
    etc. Which historical trend would you like to see addressed where I
    failed to address my observation that a volatile and demand driven
    market is a bad time to compete on selling price?

    The issue was disk capacities. Historically, the same rough "doubling"
    of capacities has been the trend.

    I asked for the "historical trend" which you claimed that my comments
    did not "address".

    The thread is about disk capacities (sizes).

    Agreed. That was the start of the thread, which you initiated. When
    you mentioned "historical trends", I didn't see any data that
    described a historical trend. My apologies. I wasn't very clear
    about asking you to demonstrate a historical trend.

    So, HISTORICALLY, I
    contend that the 2X pattern has been in place for decades. I cited
    disk sizes of volumes I have personally owned and invite a discussion
    of other "oddball" sizes and why those saw a market share.

    If you want to specify a rate of increase, you need to also specify
    the rate increase over a specific time period. 2X is not sufficient.
    From this graph, it was something like 10x every 5 years: <https://www.reddit.com/r/DataHoarder/comments/17u8c5q/the_7_orders_of_hdd_magnitude_1980_present/>
    That was the increase from 1980 to 2005. Since then, the rate of
    increase has decreased to about 2x every 5 years. I could not find
    the source of that data used to create the graph. The graph also
    indicate the changes in drive form factor. Kinda useless, but all I
    could find. Ok, now where's YOUR data.

    Instead, you provided a disk size "issue" which
    could be explained as an exercise in rounding and truncating long
    strings of numbers. When one has a drive with a trillion bits, a few
    missing or surplus bits are of little importance.

    I recall 4G drives. Then 9G. 18G, 36G, 72G, 146G, 300G, 600G, 500G,
    1T, 2T, 4T, 8T, etc.

    No 19G or 310G drives. No 7T.

    Regardless of price or quantities sold.

    Are you suggesting that drive capacity should be selected by
    intelligent design instead of natural selection?

    No. I asked why the sizes always (including historically) seem
    to follow a particular pattern/progression.

    Yes, and I asked you to provide evidence of such a trend.

    Why 5TB drives
    aren't common, considering they have some additional appeal
    beyond 4TB drives (presumably at a lower price point than 8TB)

    My guess(tm) is that major improvements in HDD form factor, oxide
    formulation, media density, platter RPM, head flying height, data
    encoding, error recovery, mergers/acquisitions, etc are what drove the increases in drive capacity. I would not expect these to occur in an
    orderly sequence, which might explain why drive capacity also did not
    increase in an orderly sequence.

    The RS03 became the RS04 by making use of the "other side"
    of the platter. So, you expected its capacity to be twice that
    of the '03.

    That was a DEC drive used in the PDP-10 in the late 1960's: <https://gunkies.org/wiki/RS03/04_disk_drive>
    A more recent example might be more helpful.

    You wrote "So, you expected its capacity to be twice...". I wrote no
    such thing. You're putting words into my mouth and then complaining
    that I said something wrong. I did not predict a doubling of capacity
    because of one major innovation. My guess(tm) is you're extrapolating
    from the doubling in floppy disk capacity, which did happen when
    double sided floppy disks were introduced. Also, using both sides of
    a disk can double the capacity, but only once because there are only 2
    sides to a platter. The capacity graph would show a 2X jump only once
    then continue rising at the previous rate (assuming all other things
    remained constant).

    If using both sides of a platter was the only improvement in HDD drive construction, then I would expect to see a corresponding increase in
    drive capacity. However, if were combined with other changes, the
    improvements in capacity would be a combination of these changes and
    not increase at a constant 2X rate.

    I don't see that to be the case with modern drives -- the
    "back side" is already in use. And, there is a limit
    as to how many additional platters you can squeeze into
    the case.

    Intelligent design
    might yield a few cool interesting patterns and magical numbers.
    However, natural selection simple scans the platters for errors, fills
    them with some number of bits that the platters can safely hold, saves
    some bits for error correction, and reserves some bits for wear
    leveling and uncorrectable errors. The idea is to maximize the number
    of usable bits over each platter. Such a scheme is unlikely to
    produce your short and convenient disk capacity numbers.
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Johann 'Myrkraverk' Oskarsson@johann@myrkraverk.invalid to sci.electronics.design on Mon Nov 16 02:35:49 2026
    From Newsgroup: sci.electronics.design

    On 11/16/2026 1:01 AM, john larkin wrote:
    On Mon, 16 Nov 2026 00:54:19 +0800, Johann 'Myrkraverk' Oskarsson <johann@myrkraverk.invalid> wrote:

    On 11/16/2026 12:39 AM, john larkin wrote:
    On Sun, 15 Nov 2026 23:50:47 +0800, Johann 'Myrkraverk' Oskarsson
    <johann@myrkraverk.invalid> wrote:

    On 11/15/2026 11:43 PM, john larkin wrote:
    On Sun, 15 Nov 2026 13:37:45 +0000, liz@poppyrecords.invalid.invalid >>>>> (Liz Tuddenham) wrote:

    Don Y <blockedofcourse@foo.invalid> wrote:

    [...]
    Every drive manufacturer makes it clear that a terabyte is 1000 billion >>>>>>> bytes.

    Is that an American billion (billiard) or a real English billion (a >>>>>> bi-million)?

    Thousand, million, billion, trillion, quadrillion.

    Steps of 1e3, like the SI prefixes K M G T P.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    And never mind the older generation of Brits who put "milliard" in there >>>> somewhere.

    That sounds like something bad to eat, like marmite.

    We have wonderful restaurants here in San Francisco. Italian, French,
    cajun-creole, bbq, thai, nepalese, mandarin, cantonese, mexican,
    portugese, eritrean, yucatan, pizza, all sorts of stuff. We like some
    neighborhood places like Regent Thai and United Dumplings and Go Duck
    Yourself.

    But there are no British or Irish or German restaurants. There is
    Cinderella, a Russian bakery.

    I think there is one kosher restaurant. It's awful.





    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    We have a German restaurant called Brotzeit. It's a chain with a few
    outlets, but it's far from common; unlike Texas Roadhouse and Fridays.

    Is the Roadhouse any good? There's one east of here on I80.

    I remember a German restaurant in NYC that was good. Luchows. Roast
    goose. It's closed now.

    I think so. Roadhouse is one of my favorite local restaurants. Along
    with Chili's and Fridays. They're all sort of comparable.

    I'll try to make a point of going to Brotzeit in the near future, it's
    been a while. I hope they haven't changed the menu too much.
    --
    Johann | email: invalid -> com | http://www.myrkraverk.com/blog/
    I'm not from the Internet, I just work there. | via Easynews.com https://bsky.app/profile/myrkraverk.bsky.social | for ( ;; ) _:;
    Federated at https://fed.brid.gy/bsky/myrkraverk.bsky.social
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Don Y@blockedofcourse@foo.invalid to sci.electronics.design on Sun Nov 15 12:19:36 2026
    From Newsgroup: sci.electronics.design

    On 11/15/2026 11:34 AM, Jeff Liebermann wrote:
    So, HISTORICALLY, I
    contend that the 2X pattern has been in place for decades. I cited
    disk sizes of volumes I have personally owned and invite a discussion
    of other "oddball" sizes and why those saw a market share.

    If you want to specify a rate of increase, you need to also specify
    the rate increase over a specific time period. 2X is not sufficient.

    It is not the RATE of increase that is the issue. It is the number of different capacities (and those actual values) offered. And,
    this would (hopefully) expose WHY models are offered in these
    increasing capacities.

    I've indicated that the 2X trend has persisted for a very long time.

    I specified a 2G disk for SWMBO's first computer (ages ago).
    (Amusingly, I thought she would never need anything more than that!)

    I had purchased 4G, 9G, 18G, 36G, 72G, 146G, 250G, 300G, 500G, 600G,
    750G, 1T, 2T, 4T, 8T drives. These in IDE (before it was called IDE
    or later PATA), SCSI, Wide SCSI, SAS, SCA, FC-AL, SATA interfaces.
    (I even have a few with USB interfaces *to* the drive)

    And, also had some oddballs at 320G, 640G, 1.5T, 3T, 14T.

    But, for the most part, capacities seem to increase in multiples of 2X.

    Solid state memory capacities tend to increase in multiples of 4X
    (which can be traced to the die geometries)

    My question was meant to address the "why" behind the 2X factor.

    From this graph, it was something like 10x every 5 years: <https://www.reddit.com/r/DataHoarder/comments/17u8c5q/the_7_orders_of_hdd_magnitude_1980_present/>
    That was the increase from 1980 to 2005. Since then, the rate of
    increase has decreased to about 2x every 5 years. I could not find
    the source of that data used to create the graph. The graph also
    indicate the changes in drive form factor. Kinda useless, but all I
    could find. Ok, now where's YOUR data.

    Instead, you provided a disk size "issue" which
    could be explained as an exercise in rounding and truncating long
    strings of numbers. When one has a drive with a trillion bits, a few
    missing or surplus bits are of little importance.

    I recall 4G drives. Then 9G. 18G, 36G, 72G, 146G, 300G, 600G, 500G,
    1T, 2T, 4T, 8T, etc.

    No 19G or 310G drives. No 7T.

    Regardless of price or quantities sold.

    Are you suggesting that drive capacity should be selected by
    intelligent design instead of natural selection?

    No. I asked why the sizes always (including historically) seem
    to follow a particular pattern/progression.

    Yes, and I asked you to provide evidence of such a trend.

    Why 5TB drives
    aren't common, considering they have some additional appeal
    beyond 4TB drives (presumably at a lower price point than 8TB)

    My guess(tm) is that major improvements in HDD form factor, oxide formulation, media density, platter RPM, head flying height, data
    encoding, error recovery, mergers/acquisitions, etc are what drove the increases in drive capacity. I would not expect these to occur in an
    orderly sequence, which might explain why drive capacity also did not increase in an orderly sequence.

    The RS03 became the RS04 by making use of the "other side"
    of the platter. So, you expected its capacity to be twice that
    of the '03.

    That was a DEC drive used in the PDP-10 in the late 1960's: <https://gunkies.org/wiki/RS03/04_disk_drive>
    A more recent example might be more helpful.

    You wrote "So, you expected its capacity to be twice...". I wrote no

    Read the pronoun "you" as "one"

    such thing. You're putting words into my mouth and then complaining
    that I said something wrong. I did not predict a doubling of capacity because of one major innovation. My guess(tm) is you're extrapolating
    from the doubling in floppy disk capacity, which did happen when
    double sided floppy disks were introduced. Also, using both sides of
    a disk can double the capacity, but only once because there are only 2
    sides to a platter. The capacity graph would show a 2X jump only once
    then continue rising at the previous rate (assuming all other things
    remained constant).

    Doesn't matter. It explains why the RS04 had twice the capacity of the RS03. No changes in technology; just using the bottom surface in addition to
    the top.

    If using both sides of a platter was the only improvement in HDD drive construction, then I would expect to see a corresponding increase in
    drive capacity. However, if were combined with other changes, the improvements in capacity would be a combination of these changes and
    not increase at a constant 2X rate.

    You can add additional platters, as other drives did after the RS04.

    I don't see that to be the case with modern drives -- the
    "back side" is already in use. And, there is a limit
    as to how many additional platters you can squeeze into
    the case.

    Intelligent design
    might yield a few cool interesting patterns and magical numbers.
    However, natural selection simple scans the platters for errors, fills
    them with some number of bits that the platters can safely hold, saves
    some bits for error correction, and reserves some bits for wear
    leveling and uncorrectable errors. The idea is to maximize the number
    of usable bits over each platter. Such a scheme is unlikely to
    produce your short and convenient disk capacity numbers.



    --- Synchronet 3.22a-Linux NewsLink 1.2