From Newsgroup: sci.electronics.design
On Thu, 12 Nov 2026 16:00:02 +0000, someone <
2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com> wrote:
It's going gangbusters in LED lighting applications. But it looks like it may be losing out to FlipChip in the emerging super-miniaturized and high density embedded systems, although it's still frequently used.
CAGR: Compound Annual Growth Rate
https://www.strategicmarketresearch.com/market-report/chip-on-board-led-market
Right, LEDs are often wire-bonded to a pcb or to an aluminum thing
with a thin white insulated coating.
Serious chips seem to be going to leadless packages and BGAs.
COBs don't look repairable to me, so a dense board might have bad
yields with COB. Cordwood had the same problem.
We use some tiny unpackaged BGA GaN fets and glob-top them after
assembly. We install them on small mouse-bite pcb subassemblies so we
can replace them if a GaN fet fails.
I wonder what the first-pass yield is on cell phone boards, and if
they are repaired or tossed.
AI Overview
Typical first-pass yield (FPY) for consumer electronics and standard
PC board manufacturing generally ranges from 95% to 99% at individual
steps or well-managed production lines. However, because smartphone
circuit boards feature high component density, complex multi-step
processes (component placement, reflow soldering, screen/housing
assembly, and testing), the overall Rolled Throughput Yield (RTY)
across all sequential operations is lower, often landing closer to 80%
to 85% before rework.
John Larkin
Highland Tech Glen Canyon Design Center
Lunatic Fringe Electronics
--- Synchronet 3.22a-Linux NewsLink 1.2