• A tiny squeeze dramatically changes the magnetism of exotic materials

    From Jan Panteltje@alien@comet.invalid to sci.electronics.design,sci.physics on Wed Nov 4 13:26:31 2026
    From Newsgroup: sci.electronics.design

    From:
    https://www.sciencedaily.com/releases/2026/11/261101010541.htm

    A tiny squeeze dramatically changes the magnetism of exotic materials
    Date:
    November 4, 2026
    Source:
    DOE/Oak Ridge National Laboratory
    Summary:
    Scientists have discovered that a simple mechanical squeeze can dramatically
    alter the magnetic properties and electrical behavior of exotic materials
    called altermagnets.
    The surprising breakthrough could open the door to faster, more energy-
    efficient electronics and new technologies for quantum computing.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bill Sloman@bill.sloman@ieee.org to sci.electronics.design,sci.physics on Thu Nov 5 01:16:15 2026
    From Newsgroup: sci.electronics.design

    On 5/11/2026 12:26 am, Jan Panteltje wrote:
    From:
    https://www.sciencedaily.com/releases/2026/11/261101010541.htm

    A tiny squeeze dramatically changes the magnetism of exotic materials
    Date:
    November 4, 2026
    Source:
    DOE/Oak Ridge National Laboratory
    Summary:
    Scientists have discovered that a simple mechanical squeeze can dramatically
    alter the magnetic properties and electrical behavior of exotic materials
    called altermagnets.
    The surprising breakthrough could open the door to faster, more energy-
    efficient electronics and new technologies for quantum computing.

    The anomalous Hall effect is so exotic that I'd never heard of it.

    I suppose I should have done - it seems to have been known about since
    1954 - but if nobody sold an anomalous Hall effect sensor I wouldn't
    have had to worry about it.

    https://en.wikipedia.org/wiki/Hall_effect

    A mixture of manganese telluride and iron sulphide is not going to be
    one that that's easy to make in commercial quantitities, and exposure to tellurium gives you "tellurium breath", which is something to avoid.

    When I was a graduate student in chemistry a colleague in the
    engineering department got me to read up on tellurium in the chemistry library and I managed to miss that effect, which didn't help his social
    life, or my self-esteem.
    --
    Bill sloman, Sydney


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Wed Nov 4 15:07:40 2026
    From Newsgroup: sci.electronics.design

    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials

    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bill Sloman@bill.sloman@ieee.org to sci.electronics.design on Thu Nov 5 09:31:56 2026
    From Newsgroup: sci.electronics.design

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials

    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being
    very carefully annealed. It's popular for magnetic shielding, in the
    sense that people do use it, but it's so easy to wreck the permeability
    that nobody I knew was ever willing to try to use it to solve any
    practical problem.
    --
    Bill Sloman, Sydney

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From ehsjr@ehsjr@verizon.net to sci.electronics.design on Wed Nov 4 21:51:36 2026
    From Newsgroup: sci.electronics.design

    On 11/4/2026 10:07 AM, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials

    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.


    IBM has made extensive use of mu metal starting in the 1950's
    to my knowledge - maybe before then.

    Ed
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Thu Nov 5 08:47:45 2026
    From Newsgroup: sci.electronics.design

    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials

    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being
    very carefully annealed. It's popular for magnetic shielding, in the
    sense that people do use it, but it's so easy to wreck the permeability
    that nobody I knew was ever willing to try to use it to solve any
    practical problem.

    Even after mild mechanical damage, it is still a lot better at magnetic shielding than most other materials.
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Thu Nov 5 09:04:24 2026
    From Newsgroup: sci.electronics.design

    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials

    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being
    very carefully annealed. It's popular for magnetic shielding, in the
    sense that people do use it, but it's so easy to wreck the permeability
    that nobody I knew was ever willing to try to use it to solve any
    practical problem.

    It is used a lot, in the form of thick-walled pots, as the magnetic
    shielding for low-signal audio transformers. I presume they are 'drawn'
    and cut to size first, then annealed as the last stage in the process.

    I came across an amusing fault where one of these transformers in a
    piece of BBC equipment was picking up magnetic hum fron the mains
    transformer. There were two lengths of brass studding running through
    the pot, holding the lid on at one end and holding the pot to a mounting
    plate at the other end. Someone had replaced one of the brass pieces
    with an almost-identical steel one, which was conducting the external
    field right through the pot.
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to sci.electronics.design on Thu Nov 5 17:18:46 2026
    From Newsgroup: sci.electronics.design

    On 05/11/2026 09:04, Liz Tuddenham wrote:
    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials

    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being
    very carefully annealed. It's popular for magnetic shielding, in the
    sense that people do use it, but it's so easy to wreck the permeability
    that nobody I knew was ever willing to try to use it to solve any
    practical problem.

    It is used a lot, in the form of thick-walled pots, as the magnetic
    shielding for low-signal audio transformers. I presume they are 'drawn'
    and cut to size first, then annealed as the last stage in the process.

    I came across an amusing fault where one of these transformers in a
    piece of BBC equipment was picking up magnetic hum fron the mains transformer. There were two lengths of brass studding running through
    the pot, holding the lid on at one end and holding the pot to a mounting plate at the other end. Someone had replaced one of the brass pieces
    with an almost-identical steel one, which was conducting the external
    field right through the pot.

    I remember those. They were called "rep coils" (repeater coils).
    Input and output 600 ohms balanced and shielded as you describe.
    Very low distortion and superb frequency response.
    Before everything became digital the broadcast audio would have
    passed through dozens of them from the studio all the way to
    the transmitters.
    I think I have one somewhere.
    John

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to sci.electronics.design on Thu Nov 5 18:05:24 2026
    From Newsgroup: sci.electronics.design

    On 05/11/2026 17:18, John R Walliker wrote:
    On 05/11/2026 09:04, Liz Tuddenham wrote:
    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials >>>>
    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being
    very carefully annealed. It's popular for magnetic shielding, in the
    sense that people do use it, but it's so easy to wreck the permeability
    that nobody I knew was ever willing to try to use it to solve any
    practical problem.

    It is used a lot, in the form of thick-walled pots, as the magnetic
    shielding for low-signal audio transformers.-a I presume they are 'drawn'
    and cut to size first, then annealed as the last stage in the process.

    I came across an amusing fault where one of these transformers in a
    piece of BBC equipment was picking up magnetic hum fron the mains
    transformer.-a There were two lengths of brass studding running through
    the pot, holding the lid on at one end and holding the pot to a mounting
    plate at the other end.-a Someone had replaced one of the brass pieces
    with an almost-identical steel one, which was conducting the external
    field right through the pot.

    I remember those.-a They were called "rep coils" (repeater coils).
    Input and output 600 ohms balanced and shielded as you describe.
    Very low distortion and superb frequency response.
    Before everything became digital the broadcast audio would have
    passed through dozens of them from the studio all the way to
    the transmitters.
    I think I have one somewhere.
    John

    I once had a batch of mu-metal shields made for a medical product.
    An oscillator operating at about 2MHz which used a standard
    gapped pot-core was being frequency modulated by the magnitude of
    the environmental magnetic field.
    This meant that dc fields such as the earths would cause a small
    frequency shift and mains frequency fields caused a 100Hz
    modulation. The magnetic field was causing a very small
    variation in the permeability of the ferrite core. The effects
    were very small but mattered.
    The mu-metal pot solved the problem.
    John

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Thu Nov 5 21:07:52 2026
    From Newsgroup: sci.electronics.design

    John R Walliker <jrwalliker@gmail.com> wrote:

    On 05/11/2026 09:04, Liz Tuddenham wrote:
    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials >>>
    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being
    very carefully annealed. It's popular for magnetic shielding, in the
    sense that people do use it, but it's so easy to wreck the permeability
    that nobody I knew was ever willing to try to use it to solve any
    practical problem.

    It is used a lot, in the form of thick-walled pots, as the magnetic shielding for low-signal audio transformers. I presume they are 'drawn' and cut to size first, then annealed as the last stage in the process.

    I came across an amusing fault where one of these transformers in a
    piece of BBC equipment was picking up magnetic hum fron the mains transformer. There were two lengths of brass studding running through
    the pot, holding the lid on at one end and holding the pot to a mounting plate at the other end. Someone had replaced one of the brass pieces
    with an almost-identical steel one, which was conducting the external
    field right through the pot.

    I remember those. They were called "rep coils" (repeater coils).
    Input and output 600 ohms balanced and shielded as you describe.
    Very low distortion and superb frequency response.

    These were in the input circuits of a pair Spendor BC1A powered
    loudspeakers. One of the pair hummed, the other didn't, so there was obviously a fault to be found.
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Thu Nov 5 21:07:52 2026
    From Newsgroup: sci.electronics.design

    John R Walliker <jrwalliker@gmail.com> wrote:

    [...]
    The magnetic field was causing a very small
    variation in the permeability of the ferrite core. The effects
    were very small but mattered.


    Eddystones made a VHF tuner for the BBC to cover the radio microphone
    band. To cope with the frequency drift of the poorly-stabilised
    transmtters, the tuning inductor was paralleled by another inductor on a ferrite core in the magnetic gap of a P.O.2000 relay frame. The relay
    coil was in the anode circuit of an EF91 which had its grid fed from a frequency-discriminating circuit. It must have been one of the first
    VHF tuners with AFC.
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to sci.electronics.design on Thu Nov 5 23:14:59 2026
    From Newsgroup: sci.electronics.design

    On 05/11/2026 21:07, Liz Tuddenham wrote:
    John R Walliker <jrwalliker@gmail.com> wrote:

    On 05/11/2026 09:04, Liz Tuddenham wrote:
    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials >>>>>
    I suppose Mu-metal doesn't count, as it has been known about for at
    least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being
    very carefully annealed. It's popular for magnetic shielding, in the
    sense that people do use it, but it's so easy to wreck the permeability >>>> that nobody I knew was ever willing to try to use it to solve any
    practical problem.

    It is used a lot, in the form of thick-walled pots, as the magnetic
    shielding for low-signal audio transformers. I presume they are 'drawn' >>> and cut to size first, then annealed as the last stage in the process.

    I came across an amusing fault where one of these transformers in a
    piece of BBC equipment was picking up magnetic hum fron the mains
    transformer. There were two lengths of brass studding running through
    the pot, holding the lid on at one end and holding the pot to a mounting >>> plate at the other end. Someone had replaced one of the brass pieces
    with an almost-identical steel one, which was conducting the external
    field right through the pot.

    I remember those. They were called "rep coils" (repeater coils).
    Input and output 600 ohms balanced and shielded as you describe.
    Very low distortion and superb frequency response.

    These were in the input circuits of a pair Spendor BC1A powered
    loudspeakers. One of the pair hummed, the other didn't, so there was obviously a fault to be found.

    Spencer Hughes worked at BBC Research Dept designing loudspeakers
    before founding Spendor, so that is no surprise.
    (I have a pair of LS3/5As from the original batch of kits made
    for BBC staff. I still use them.)

    John

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bill Sloman@bill.sloman@ieee.org to sci.electronics.design on Fri Nov 6 11:32:01 2026
    From Newsgroup: sci.electronics.design

    On 6/11/2026 10:14 am, John R Walliker wrote:
    On 05/11/2026 21:07, Liz Tuddenham wrote:
    John R Walliker <jrwalliker@gmail.com> wrote:

    On 05/11/2026 09:04, Liz Tuddenham wrote:
    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    <snip>

    Spencer Hughes worked at BBC Research Dept designing loudspeakers
    before founding Spendor, so that is no surprise.
    (I have a pair of LS3/5As from the original batch of kits made
    for BBC staff.-a I still use them.)

    My current hi-fi speakers are a pair of LS3/5As that I bought
    second-hand in Cambridge in the 1980's. I used to read Hi-Fi News and
    Record Review and even got a couple of letters to the editor published
    there, so I knew a bargain when I saw it.
    --
    Bill Sloman, Sydney

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Fri Nov 6 09:43:43 2026
    From Newsgroup: sci.electronics.design

    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 6/11/2026 10:14 am, John R Walliker wrote:
    On 05/11/2026 21:07, Liz Tuddenham wrote:
    John R Walliker <jrwalliker@gmail.com> wrote:

    On 05/11/2026 09:04, Liz Tuddenham wrote:
    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    <snip>

    Spencer Hughes worked at BBC Research Dept designing loudspeakers
    before founding Spendor, so that is no surprise.
    (I have a pair of LS3/5As from the original batch of kits made
    for BBC staff.-a I still use them.)

    My current hi-fi speakers are a pair of LS3/5As that I bought
    second-hand in Cambridge in the 1980's. I used to read Hi-Fi News and
    Record Review and even got a couple of letters to the editor published
    there, so I knew a bargain when I saw it.

    They are really good and include several design features that still
    don't seem to have been appreciated by some modern loudspeaker
    designers:

    1) An absorber to stop HF waves from propagating beyond the edges of
    the front panels and creating 'phantom' images of the tweeters in space
    on each side of the loudspeaker. (The Spendor BC1A'sachieved this with a
    double front panel, with the absorber in the gap between the panels.)

    2) A shelving response in the bass to correct for the bass loss caused
    by the transition from 180-degree radiation to 360-degree radiation when
    the wavelength of the sound approaches the dimansions of the front
    panel.

    The original design was 'bi-amped' but production models used a
    crossover network - a retrograde step in my opinion.

    I have made an expeimantal 'budget' LS3/5a from a secondhand KEF Coda.
    It has virtually the same drive units as the LS3/5a but the crossover
    and flimsy cabinet spoil the final result. I rebuilt the cabinet with metal-plate-and-roofing-felt sandwich construction and replaced the
    plastic back panel with a single sheet of 3mm alloy plate. On the
    inside of the back panel I mounted a toroidal mains transformer and a two-channel I.C. amplifier module, using one amplifier for each drive
    unit.

    With a properly designed state-variable crossover and appropriate bass correction, the results sound very good indeed - but it still isn't as
    accurate as my LS3/5a's.
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Fri Nov 6 09:43:43 2026
    From Newsgroup: sci.electronics.design

    John R Walliker <jrwalliker@gmail.com> wrote:

    On 05/11/2026 21:07, Liz Tuddenham wrote:
    John R Walliker <jrwalliker@gmail.com> wrote:

    On 05/11/2026 09:04, Liz Tuddenham wrote:
    Bill Sloman <bill.sloman@ieee.org> wrote:

    On 5/11/2026 2:07 am, Liz Tuddenham wrote:
    Jan Panteltje <alien@comet.invalid> wrote:

    [...]
    A tiny squeeze dramatically changes the magnetism of exotic materials >>>>>
    I suppose Mu-metal doesn't count, as it has been known about for at >>>>> least half a century, so that doesn't make it exotic any more.

    Mu-metal's extraordinarily high permeability does depend on it being >>>> very carefully annealed. It's popular for magnetic shielding, in the >>>> sense that people do use it, but it's so easy to wreck the permeability >>>> that nobody I knew was ever willing to try to use it to solve any
    practical problem.

    It is used a lot, in the form of thick-walled pots, as the magnetic
    shielding for low-signal audio transformers. I presume they are 'drawn' >>> and cut to size first, then annealed as the last stage in the process. >>>
    I came across an amusing fault where one of these transformers in a
    piece of BBC equipment was picking up magnetic hum fron the mains
    transformer. There were two lengths of brass studding running through >>> the pot, holding the lid on at one end and holding the pot to a mounting >>> plate at the other end. Someone had replaced one of the brass pieces
    with an almost-identical steel one, which was conducting the external
    field right through the pot.

    I remember those. They were called "rep coils" (repeater coils).
    Input and output 600 ohms balanced and shielded as you describe.
    Very low distortion and superb frequency response.

    These were in the input circuits of a pair Spendor BC1A powered loudspeakers. One of the pair hummed, the other didn't, so there was obviously a fault to be found.

    Spencer Hughes worked at BBC Research Dept designing loudspeakers
    before founding Spendor, so that is no surprise.
    (I have a pair of LS3/5As from the original batch of kits made
    for BBC staff. I still use them.)

    I bought mine secondhand from a scrapyard. The tweeter in one of them
    was blown so I rang up Doris Hughes and she sold me a correctly-matched replacement.
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2