• tough TIA

    From john larkin@jl@htigct.com to sci.electronics.design on Tue Nov 3 09:34:00 2026
    From Newsgroup: sci.electronics.design


    https://www.dropbox.com/scl/fi/hblapw8i0vnvl72xmy1uo/Tough_TIA_3.jpg?rlkey=7uily0q383u5963go7uugldbm&raw=1

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeroen Belleman@jeroen@nospam.please to sci.electronics.design on Tue Nov 3 19:25:14 2026
    From Newsgroup: sci.electronics.design

    On 11/3/26 18:34, john larkin wrote:

    https://www.dropbox.com/scl/fi/hblapw8i0vnvl72xmy1uo/Tough_TIA_3.jpg?rlkey=7uily0q383u5963go7uugldbm&raw=1


    Nice. What's it for? By 'tough', you mean it will take a fair
    bit of abuse?

    Jeroen Belleman
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@htigct.com to sci.electronics.design on Tue Nov 3 13:15:59 2026
    From Newsgroup: sci.electronics.design

    On Tue, 3 Nov 2026 19:25:14 +0100, Jeroen Belleman
    <jeroen@nospam.please> wrote:

    On 11/3/26 18:34, john larkin wrote:

    https://www.dropbox.com/scl/fi/hblapw8i0vnvl72xmy1uo/Tough_TIA_3.jpg?rlkey=7uily0q383u5963go7uugldbm&raw=1


    Nice. What's it for? By 'tough', you mean it will take a fair
    bit of abuse?

    Jeroen Belleman

    Yes. And it doesn't much care what the source impedance is. The
    classic opamp summing point thing cares, and is fragile.

    This should look ohmic at operating frequencies.

    This might be for testing some aircraft capacitive fuel level
    measurement gear, indirectly.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From someone@2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com to sci.electronics.design on Fri Nov 6 16:30:02 2026
    From Newsgroup: sci.electronics.design

    Is there such a thing as bridge rectifier rated for RF? Or is that some kind of large signal clamp?
    --
    For full context, visit https://www.electrondepot.com/electrodesign/tough-tia-4421807-.htm

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeroen Belleman@jeroen@nospam.please to sci.electronics.design on Fri Nov 6 17:46:51 2026
    From Newsgroup: sci.electronics.design

    On 11/6/26 17:30, someone wrote:
    Is there such a thing as bridge rectifier rated for RF? Or is that some
    kind of large signal clamp?


    You can get small Schottky diode rectifier bridges. Sampling
    bridges, too. I assumed he used either of those. I thought
    it was cute.

    Jeroen Belleman


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@glen--canyon.com to sci.electronics.design on Fri Nov 6 09:08:27 2026
    From Newsgroup: sci.electronics.design

    On Fri, 06 Nov 2026 16:30:02 +0000, someone <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com> wrote:

    Is there such a thing as bridge rectifier rated for RF? Or is that some kind of large signal clamp?

    It's a overload clamp to keep some user from blowing out the silicon.

    The dynamic impedance looking into the NPN emitter will be 6 ohms
    roughly, so the capacitance of a big ugly bridge shouldn't hurt. There
    are various bridges available, PN and schottky.

    Of course I need to simulate this some more, if the customer shows
    enough interest. This would be for fun and making friends; I don't
    expect to sell enough to make money on this one.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to sci.electronics.design on Fri Nov 6 09:14:01 2026
    From Newsgroup: sci.electronics.design

    On Fri, 06 Nov 2026 16:30:02 +0000, someone <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com> wrote:

    Is there such a thing as bridge rectifier rated for RF? Or is that some kind of large signal clamp?

    Double Balance Mixer (for RF):
    "Taking the mystery out of diode double-balanced mixers" <https://www.robkalmeijer.nl/techniek/electronica/radiotechniek/hambladen/qst/1993/12/page32/>

    Most of the balanced, double balanced and triple balanced bridges are
    built with diode bridges. For example: <https://www.minicircuits.com/WebStore/Mixers.html>
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Phil Hobbs@pcdhSpamMeSenseless@electrooptical.net to sci.electronics.design on Fri Nov 6 17:22:49 2026
    From Newsgroup: sci.electronics.design

    Jeff Liebermann <jeffl@cruzio.com> wrote:
    On Fri, 06 Nov 2026 16:30:02 +0000, someone <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com>
    wrote:

    Is there such a thing as bridge rectifier rated for RF? Or is that some
    kind of large signal clamp?

    Double Balance Mixer (for RF):
    "Taking the mystery out of diode double-balanced mixers" <https://www.robkalmeijer.nl/techniek/electronica/radiotechniek/hambladen/qst/1993/12/page32/>

    Most of the balanced, double balanced and triple balanced bridges are
    built with diode bridges. For example: <https://www.minicircuits.com/WebStore/Mixers.html>



    Mixers use rings, not bridges. TheyrCOll work as protection devices too, and you donrCOt need to short out the other two terminals, as you do with a
    bridge.

    Cheers

    Phil Hobbs
    --
    Dr Philip C D Hobbs Principal Consultant ElectroOptical Innovations LLC / Hobbs ElectroOptics Optics, Electro-optics, Photonics, Analog Electronics
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@glen--canyon.com to sci.electronics.design on Fri Nov 6 09:39:00 2026
    From Newsgroup: sci.electronics.design

    On Fri, 6 Nov 2026 17:22:49 -0000 (UTC), Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> wrote:

    Jeff Liebermann <jeffl@cruzio.com> wrote:
    On Fri, 06 Nov 2026 16:30:02 +0000, someone
    <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com>
    wrote:

    Is there such a thing as bridge rectifier rated for RF? Or is that some
    kind of large signal clamp?

    Double Balance Mixer (for RF):
    "Taking the mystery out of diode double-balanced mixers"
    <https://www.robkalmeijer.nl/techniek/electronica/radiotechniek/hambladen/qst/1993/12/page32/>

    Most of the balanced, double balanced and triple balanced bridges are
    built with diode bridges. For example:
    <https://www.minicircuits.com/WebStore/Mixers.html>



    Mixers use rings, not bridges. TheyAll work as protection devices too, and >you donAt need to short out the other two terminals, as you do with a
    bridge.

    Cheers

    Phil Hobbs

    If the user connects the input to +28 or even 120 VAC, or ESD zaps it,
    I want a hunky bridge to protect the downstream stuff. Not some
    delicate RF part.

    The classic TIA, that exposes the summing point of an opamp to the
    world, has lots of hazards.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Gerhard Hoffmann@dk4xp@arcor.de to sci.electronics.design on Fri Nov 6 19:05:21 2026
    From Newsgroup: sci.electronics.design

    Am 06.11.26 um 18:39 schrieb john larkin:
    On Fri, 6 Nov 2026 17:22:49 -0000 (UTC), Phil Hobbs

    Mixers use rings, not bridges. TheyrCOll work as protection devices too, and
    you donrCOt need to short out the other two terminals, as you do with a
    bridge.

    Cheers

    Phil Hobbs

    If the user connects the input to +28 or even 120 VAC, or ESD zaps it,
    I want a hunky bridge to protect the downstream stuff. Not some
    delicate RF part.

    The classic TIA, that exposes the summing point of an opamp to the
    world, has lots of hazards.
    I stumbled across that one last week:

    < https://www.digikey.de/de/products/detail/microchip-technology/MD0105K6-G/4902523
    >

    /Gerhard
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From John R Walliker@jrwalliker@gmail.com to sci.electronics.design on Fri Nov 6 18:20:52 2026
    From Newsgroup: sci.electronics.design

    On 06/11/2026 17:39, john larkin wrote:
    On Fri, 6 Nov 2026 17:22:49 -0000 (UTC), Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> wrote:

    Jeff Liebermann <jeffl@cruzio.com> wrote:
    On Fri, 06 Nov 2026 16:30:02 +0000, someone
    <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com>
    wrote:

    Is there such a thing as bridge rectifier rated for RF? Or is that some >>>> kind of large signal clamp?

    Double Balance Mixer (for RF):
    "Taking the mystery out of diode double-balanced mixers"
    <https://www.robkalmeijer.nl/techniek/electronica/radiotechniek/hambladen/qst/1993/12/page32/>

    Most of the balanced, double balanced and triple balanced bridges are
    built with diode bridges. For example:
    <https://www.minicircuits.com/WebStore/Mixers.html>



    Mixers use rings, not bridges. TheyrCOll work as protection devices too, and
    you donrCOt need to short out the other two terminals, as you do with a
    bridge.

    Cheers

    Phil Hobbs

    If the user connects the input to +28 or even 120 VAC, or ESD zaps it,
    I want a hunky bridge to protect the downstream stuff. Not some
    delicate RF part.

    The classic TIA, that exposes the summing point of an opamp to the
    world, has lots of hazards.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics

    BAV99 or BAV99W series connected diodes are nice for such
    purposes. They can be used for esd clamps to power rails
    (or preferably dedicated esd clamping rails) or wired as a
    back to back pair for low voltage clamping.
    I have seen them used in that configuration on the rf inputs of
    the USB cable TV dongles that many people like to use as spectrum
    analyzers.
    They are surprisingly robust for a fairly low capacitance part.
    They are very cheap indeed in high volumes.
    I have probably designed tens or perhaps hundreds of millions
    of them into a variety of automotive products.
    John

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@htigct.com to sci.electronics.design on Fri Nov 6 10:50:58 2026
    From Newsgroup: sci.electronics.design

    On Fri, 6 Nov 2026 19:05:21 +0100, Gerhard Hoffmann <dk4xp@arcor.de>
    wrote:

    Am 06.11.26 um 18:39 schrieb john larkin:
    On Fri, 6 Nov 2026 17:22:49 -0000 (UTC), Phil Hobbs

    Mixers use rings, not bridges. TheyAll work as protection devices too, and >>> you donAt need to short out the other two terminals, as you do with a
    bridge.

    Cheers

    Phil Hobbs

    If the user connects the input to +28 or even 120 VAC, or ESD zaps it,
    I want a hunky bridge to protect the downstream stuff. Not some
    delicate RF part.

    The classic TIA, that exposes the summing point of an opamp to the
    world, has lots of hazards.
    I stumbled across that one last week:

    < >https://www.digikey.de/de/products/detail/microchip-technology/MD0105K6-G/4902523
    >

    /Gerhard

    That's an interesting part. Protecting inputs and outputs is always a
    problem.

    I was enthusiastic about an Ixys self-protecting high-voltage SSR
    until we found that it's not really self-protecting.

    A nice looking TI electronic fuse detonated too.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From someone@2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com to sci.electronics.design on Mon Nov 9 17:00:02 2026
    From Newsgroup: sci.electronics.design

    There was a design news story a few decades ago about a hefty commercial mains line transient absorber built around a FW bridge. The design simply hung some heavy-duty e-caps off an unloaded bridge, which would then clamp anything with amplitude in excess of the mains average peak. It was tested with 20 kV transient peaks in the millisecond duration range and clamped the impulse nearly instantaneously.
    --
    For full context, visit https://www.electrondepot.com/electrodesign/tough-tia-4421807-.htm

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From john larkin@jl@glen--canyon.com to sci.electronics.design on Mon Nov 9 19:31:07 2026
    From Newsgroup: sci.electronics.design

    On Mon, 09 Nov 2026 17:00:02 +0000, someone <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.com> wrote:

    There was a design news story a few decades ago about a hefty commercial mains line transient absorber built around a FW bridge. The design simply hung some heavy-duty e-caps off an unloaded bridge, which would then clamp anything with amplitude in excess of the mains average peak. It was tested with 20 kV transient peaks in the millisecond duration range and clamped the impulse nearly instantaneously.

    Some of my guys just tried using a big SCR for an "emergency"
    capacitor discharge circuit. They tested it at about 4000 joules.
    That's about the energy in a 12-gage shotgun, both barrels.

    I could have told them what would happen. The wimpy gate drive didn't
    help a bit.


    John Larkin
    Highland Tech Glen Canyon Design Center
    Lunatic Fringe Electronics
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From liz@liz@poppyrecords.invalid.invalid (Liz Tuddenham) to sci.electronics.design on Tue Nov 10 10:12:58 2026
    From Newsgroup: sci.electronics.design

    john larkin <jl@glen--canyon.com> wrote:

    On Mon, 09 Nov 2026 17:00:02 +0000, someone <2a59d59e3809f827ce709d3815e3950eef4a6a93af5557a93a7fdfba71460843@example.
    wrote:


    Some of my guys just tried using a big SCR for an "emergency"
    capacitor discharge circuit. They tested it at about 4000 joules.
    That's about the energy in a 12-gage shotgun, both barrels.

    I could have told them what would happen. The wimpy gate drive didn't
    help a bit.

    Did anyone check whether the capacitor was completely discharged or were
    just the innards of the SCR discharged?
    --
    ~ Liz Tuddenham ~
    (Remove the ".invalid"s and add ".co.uk" to reply)
    www.poppyrecords.co.uk
    --- Synchronet 3.22a-Linux NewsLink 1.2