1. Forum
  2. USENET
  3. sci.electronics.basics

  • DC relay coil

    From Bob Engelhardt@BobEngelhardt@comcast.net to sci.electronics.basics on Tue Oct 19 11:08:26 2021
    From Newsgroup: sci.electronics.basics

    I have a DC relay with the coil connections marked "+" & "-". Does it
    matter? The relay operates with either polarity so there is no internal flyback diode. It's a 24v, 33ma coil for those who want to know.

    Thanks, Bob
    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Tom Biasi@tombiasi@optonline.net to sci.electronics.basics on Tue Oct 19 11:23:36 2021
    From Newsgroup: sci.electronics.basics

    On 10/19/2021 11:08 AM, Bob Engelhardt wrote:
    I have a DC relay with the coil connections marked "+" & "-".-a Does it matter?-a The relay operates with either polarity so there is no internal flyback diode.-a It's a 24v, 33ma coil for those who want to know.

    Thanks, Bob
    If the designers marked it, probably would be good to follow that.
    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Bob Engelhardt@BobEngelhardt@comcast.net to sci.electronics.basics on Tue Oct 19 15:33:58 2021
    From Newsgroup: sci.electronics.basics

    Yeah ... I guess what I was really wondering was why they would do that.

    If the designers marked it, probably would be good to follow that.

    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Sjouke Burry@burrynulnulfour@ppllaanneett.nnll to sci.electronics.basics on Tue Oct 19 22:26:29 2021
    From Newsgroup: sci.electronics.basics

    On 19.10.21 21:33, Bob Engelhardt wrote:
    Yeah ... I guess what I was really wondering was why they would do that.

    If the designers marked it, probably would be good to follow that.

    they should do that if a built-in diode is present.
    Also, the plus and minus identify the coil pins.

    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Tom Biasi@tombiasi@optonline.net to sci.electronics.basics on Tue Oct 19 16:31:40 2021
    From Newsgroup: sci.electronics.basics

    On 10/19/2021 4:26 PM, Sjouke Burry wrote:
    On 19.10.21 21:33, Bob Engelhardt wrote:
    Yeah-a ... I guess what I was really wondering was why they would do that. >>
    If the designers marked it, probably would be good to follow that.

    they should do that if a built-in diode is present.
    Also, the plus and minus identify the coil pins.

    They may use that package to make units with the diode.
    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Bob Engelhardt@BobEngelhardt@comcast.net to sci.electronics.basics on Thu Oct 21 09:55:07 2021
    From Newsgroup: sci.electronics.basics

    I Googled it (like I should have in the first place). There are a
    couple of reasons that a DC relay may be polarized:
    - internal flyback diode (as mentioned)
    - an internal LED indicator
    - a permanent magnet used to augment the mag field
    - in a latching relay

    My relay does have a LED indicator, so that's what I'm assuming is the
    reason for my polarization. And not a permanent magnet.
    --- Synchronet 3.21d-Linux NewsLink 1.2