• My "free" ATV

    From Snag@Snag_one@msn.com to rec.crafts.metalworking on Mon Oct 12 13:08:32 2026
    From Newsgroup: rec.crafts.metalworking

    It's a 2007 Arctic Cat 650 and now I know why my neighbor gave it
    away ... so far I have about 6 or 700 bucks in parts into it . If I had
    to pay somebody to work on it I couldn't afford to keep it ! This time
    it's the starter system , the sprag clutch is locked up . And the
    starter has been spinning the whole time it's running and it has worn
    out the 2 idler/reduction gears and 2 starters . I haven't got the
    clutch unit disassembled yet , I don't have the correct bolts to attach
    a puller . I'll be picking those up tomorrow while I'm in town . There's
    only 2 things that could lock it up , damaged/worn rollers/carrier or
    the needle bearing in the hub . Parts cost for this repair look to be
    between 50 and a hundred bucks in addition to the gears and starter I
    have already purchased .
    Previously I have replaced front CV axles and suspension components ,
    rear brake master cylinder and caliper and all brake pads , rear tires ,
    the starter (2nd new one is on hand) steering shaft bushings , battery ,
    fuel pump and intake boot , bought a winch and fabricated a mount for it
    . Here in The Holler we call this kind of multiple problems " being
    Zajacked" in honor of a neighbor who is famous for poor maintenance of
    his equipment .
    --
    Snag
    Muslims hate dogs because they
    protect women , children, and goats .
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bob La Londe@none@none.com99 to rec.crafts.metalworking on Mon Oct 12 14:51:25 2026
    From Newsgroup: rec.crafts.metalworking

    On 10/12/2026 11:08 AM, Snag wrote:
    -a-a It's a 2007 Arctic Cat 650 and now I know why my neighbor gave it
    away ... so far I have about 6 or 700 bucks in parts into it . If I had
    to pay somebody to work on it I couldn't afford to keep it ! This time
    it's the starter system , the sprag clutch is locked up . And the
    starter has been spinning the whole time it's running and it has worn
    out the 2 idler/reduction gears and 2 starters . I haven't got the
    clutch unit disassembled yet , I don't have the correct bolts to attach
    a puller . I'll be picking those up tomorrow while I'm in town . There's only 2 things that could lock it up , damaged/worn rollers/carrier-a or
    the needle bearing in the hub . Parts cost for this repair look to be between 50 and a hundred bucks in addition to the gears and starter I
    have already purchased .
    -a Previously I have replaced front CV axles and suspension components , rear brake master cylinder and caliper and all brake pads , rear tires ,
    the starter (2nd new one is on hand) steering shaft bushings , battery , fuel pump and intake boot , bought a winch and fabricated a mount for
    it .-a Here in The Holler we call this kind of multiple problems " being Zajacked" in honor of a neighbor who is famous for poor maintenance of
    his equipment .

    Used running ads are about $3000 (if they are to be believed) New
    comparable is a heck of a lot more, so repairing it may still be cost effective if you want an ATV.
    --
    Bob La Londe
    CNC Molds N Stuff
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Snag@Snag_one@msn.com to rec.crafts.metalworking on Mon Oct 12 22:36:12 2026
    From Newsgroup: rec.crafts.metalworking

    On 10/12/2026 4:51 PM, Bob La Londe wrote:
    On 10/12/2026 11:08 AM, Snag wrote:
    -a-a-a It's a 2007 Arctic Cat 650 and now I know why my neighbor gave it
    away ... so far I have about 6 or 700 bucks in parts into it . If I
    had to pay somebody to work on it I couldn't afford to keep it ! This
    time it's the starter system , the sprag clutch is locked up . And the
    starter has been spinning the whole time it's running and it has worn
    out the 2 idler/reduction gears and 2 starters . I haven't got the
    clutch unit disassembled yet , I don't have the correct bolts to
    attach a puller . I'll be picking those up tomorrow while I'm in town
    . There's only 2 things that could lock it up , damaged/worn
    rollers/carrier-a or the needle bearing in the hub . Parts cost for
    this repair look to be between 50 and a hundred bucks in addition to
    the gears and starter I have already purchased .
    -a-a Previously I have replaced front CV axles and suspension components
    , rear brake master cylinder and caliper and all brake pads , rear
    tires , the starter (2nd new one is on hand) steering shaft bushings ,
    battery , fuel pump and intake boot , bought a winch and fabricated a
    mount for it .-a Here in The Holler we call this kind of multiple
    problems " being Zajacked" in honor of a neighbor who is famous for
    poor maintenance of his equipment .

    Used running ads are about $3000 (if they are to be believed)-a New comparable is a heck of a lot more, so repairing it may still be cost effective if you want an ATV.



    I wasn't looking for one when this one was gifted ... I think one of
    the big reasons I got it rather than another neighbor is because Ken
    knew I'd work on it and repair the problems myself . Anybody else would
    be buggin' him to fix it - and as he said , if he wanted to work on it
    he'd have kept it . Spending a couple hundred bucks on parts to repair a
    post hole auger then parking it right back at his house "for use of
    everybody as needed" may have something to do with that . We've got a
    tight little group down here
    I did get the starter clutch to free up and function properly . I'm
    still going to pull it and check things out . It's not THAT big a deal
    to tear it down again if it fails , but those famous words ... "as long
    as I'm in there" . Parts should be under a hundred bucks , worst case .
    "Why is it that no one has the time to do it right , but can find the
    time to do it over?"
    --
    Snag
    Muslims hate dogs because they
    protect women , children, and goats .
    --- Synchronet 3.22a-Linux NewsLink 1.2