1. Forum
  2. USENET
  3. rec.crafts.metalworking

  • I Put It Where I Would Find It Next Time

    From Bob La Londe@none@none.com99 to rec.crafts.metalworking on Fri May 29 10:37:39 2026
    From Newsgroup: rec.crafts.metalworking

    That is probably true. It is very likely where I will eventually find
    it...

    I found and used a large counter sink when I made the clamp blocks using
    the edge clamps not that long ago. I looked all over to find one big
    enough for the job. I recall carefully placing it somewhere that would
    be easy to find next time, and I have no idea where that is.
    --
    Bob La Londe
    CNC Molds N Stuff

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bob La Londe@none@none.com99 to rec.crafts.metalworking on Fri May 29 11:08:37 2026
    From Newsgroup: rec.crafts.metalworking

    On 5/29/2026 10:37 AM, Bob La Londe wrote:
    That is probably true.-a It is very likely where I will eventually find it...

    I found and used a large counter sink when I made the clamp blocks using
    the edge clamps not that long ago.-a I looked all over to find one big enough for the job.-a I recall carefully placing it somewhere that would
    be easy to find next time, and I have no idea where that is.


    I found it. In the drawer I thought I put it in. That I had already
    looked in twice. In a container with the specs written on it with a
    paint marker. In the very front of the drawer.

    A bunch of 5/8 holes are now lightly deburred and chamfered, and on to
    the next step. Making and attaching the cross piece.
    --
    Bob La Londe
    CNC Molds N Stuff
    --- Synchronet 3.22a-Linux NewsLink 1.2