• =?UTF-8?B?QmFzc28gQXNjb3Q=?=

    From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Thu Nov 12 20:01:49 2026
    From Newsgroup: rec.bicycles.tech

    The local powder coating house now has my Basso Ascot. I picked out a red to die for. It will be ready Tuesday. Hopefully my headset willo be in by then. The threads will have to be cleaned. I have Italian BB of my Campy Record cranks and the rst of the stuff is LTWoo 10 speed and after two weeks the Vittoria tires and Perelli tubes still feel pumped up. I have to dig an 11-36 out of the parts box.
    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after 19 miles I can hardly walk. I felt rvery pebble. The calculator says that I was 10 psi over ideal but that was terrific.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Thu Nov 12 20:25:48 2026
    From Newsgroup: rec.bicycles.tech

    On Thu Nov 12 20:01:49 2026 cyclintom wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red to die for. It will be ready Tuesday. Hopefully my headset willo be in by then. The threads will have to be cleaned. I have Italian BB of my Campy Record cranks and the rst of the stuff is LTWoo 10 speed and after two weeks the Vittoria tires and Perelli tubes still feel pumped up. I have to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after 19 miles I can hardly walk. I felt rvery pebble. The calculator says that I was 10 psi over ideal but that was terrific.
    Odd thing is that the calories expended line on the Garmin shows my road bike trips being more calories intensive but my average heart rate was a little higher,
    Max heart rate was 2 counts below calculated max and I am REALLY sore.
    It will take a lot of practivce to be able todo gravel rides of any distance.on a gravel bike. The last time I did this route, I rode the road bike. And while I was tired, I wasn't sore like this. The fit seemed fine.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Thu Nov 12 22:37:45 2026
    From Newsgroup: rec.bicycles.tech

    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red
    to die for. It will be ready Tuesday. Hopefully my headset willo be in by then. The threads will have to be cleaned. I have Italian BB of my Campy Record cranks and the rst of the stuff is LTWoo 10 speed and after two
    weeks the Vittoria tires and Perelli tubes still feel pumped up. I have
    to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after
    19 miles I can hardly walk. I felt rvery pebble. The calculator says that
    I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesnrCOt have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on
    gravel bikes as they donrCOt move and thus have harsher ride as they havenrCOt leant to move/react to the lumps and bumps.

    Roger Merriman

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Fri Nov 13 21:09:20 2026
    From Newsgroup: rec.bicycles.tech

    On Thu Nov 12 22:37:45 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red to die for. It will be ready Tuesday. Hopefully my headset willo be in by then. The threads will have to be cleaned. I have Italian BB of my Campy Record cranks and the rst of the stuff is LTWoo 10 speed and after two weeks the Vittoria tires and Perelli tubes still feel pumped up. I have
    to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after
    19 miles I can hardly walk. I felt rvery pebble. The calculator says that
    I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesn?t have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on gravel bikes as they don?t move and thus have harsher ride as they haven?t leant to move/react to the lumps and bumps.
    The Ascot will just take 28 mm tires. And that is lucky since it started life as a track biken Why else would you name it after a track?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From zen cycle@funkmasterxx@hotmail.com to rec.bicycles.tech on Sat Nov 14 07:10:33 2026
    From Newsgroup: rec.bicycles.tech

    On 11/12/2026 5:37 PM, Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red
    to die for. It will be ready Tuesday. Hopefully my headset willo be in by
    then. The threads will have to be cleaned. I have Italian BB of my Campy
    Record cranks and the rst of the stuff is LTWoo 10 speed and after two
    weeks the Vittoria tires and Perelli tubes still feel pumped up. I have
    to dig an 11-36 out of the parts box.

    When I had my '84 Basso GAP restored I decided to just strip the
    original candy apple red from the fork since I knew it was chrome plated
    from the previous nicks and dings the thing had suffered over the years. However I found that the plating job was pretty bad - they didn't do the finish work on the fork after the building it and there seemed to be
    just one layer of plating, revealing all the leftover tooling and welding/brazing marks. I took it to a local electroplating shop that specialized in custom motorcycle parts and asked what they could do.
    They stripped the plating, cleaned the whole thing up and gave it a
    couple of new layers. The thing was gorgeous after they were done. When
    I picked it up the shop owner said he was kind of dubious about the
    quality of a bicycle part, but said he was impressed with the build
    quality. He commented that it was too bad they didn't do the finish work.


    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I
    pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after
    19 miles I can hardly walk. I felt rvery pebble. The calculator says that
    I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesnrCOt have a lot of volume really so need to keep the pressures high to prevent pinch flats, hence tyre volume has increased significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on gravel bikes as they donrCOt move and thus have harsher ride as they havenrCOt
    leant to move/react to the lumps and bumps.



    "back in the day" that was the case around here too. However pretty much everyone I do regular road rides with over the past 15 years or so has extensive off-road riding and racing experience - most of them race CX.
    It's to the point now that the last few races I've been to are dominated
    by the riders with a lot of road racing experience. I attribute that to
    the about of endurance training they (we) carry from the road into the off-road events. When I was racing MTB, I did quite well winning a dozen
    or so "vet expert" races over those years (~1989 - 99) by being able to sustain the pace on the last lap of the race. I certainly wasn't the
    best bike handler but being able to push the pace on the less technical sections - especially in the more hilly events - gave me a big advantage.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Sat Nov 14 13:15:37 2026
    From Newsgroup: rec.bicycles.tech

    zen cycle <funkmasterxx@hotmail.com> wrote:
    On 11/12/2026 5:37 PM, Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red >>> to die for. It will be ready Tuesday. Hopefully my headset willo be in by >>> then. The threads will have to be cleaned. I have Italian BB of my Campy >>> Record cranks and the rst of the stuff is LTWoo 10 speed and after two
    weeks the Vittoria tires and Perelli tubes still feel pumped up. I have
    to dig an 11-36 out of the parts box.

    When I had my '84 Basso GAP restored I decided to just strip the
    original candy apple red from the fork since I knew it was chrome plated from the previous nicks and dings the thing had suffered over the years. However I found that the plating job was pretty bad - they didn't do the finish work on the fork after the building it and there seemed to be
    just one layer of plating, revealing all the leftover tooling and welding/brazing marks. I took it to a local electroplating shop that specialized in custom motorcycle parts and asked what they could do.
    They stripped the plating, cleaned the whole thing up and gave it a
    couple of new layers. The thing was gorgeous after they were done. When
    I picked it up the shop owner said he was kind of dubious about the
    quality of a bicycle part, but said he was impressed with the build
    quality. He commented that it was too bad they didn't do the finish work.


    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I
    pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after >>> 19 miles I can hardly walk. I felt rvery pebble. The calculator says that >>> I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesnrCOt have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased
    significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on
    gravel bikes as they donrCOt move and thus have harsher ride as they havenrCOt
    leant to move/react to the lumps and bumps.



    "back in the day" that was the case around here too. However pretty much everyone I do regular road rides with over the past 15 years or so has extensive off-road riding and racing experience - most of them race CX.
    It's to the point now that the last few races I've been to are dominated
    by the riders with a lot of road racing experience. I attribute that to
    the about of endurance training they (we) carry from the road into the off-road events. When I was racing MTB, I did quite well winning a dozen
    or so "vet expert" races over those years (~1989 - 99) by being able to sustain the pace on the last lap of the race. I certainly wasn't the
    best bike handler but being able to push the pace on the less technical sections - especially in the more hilly events - gave me a big advantage.


    Seems to depend if folks have any off road experience, some of my gravel
    riding mates used 90rCOs MTB in there youth so that generally make them impressive off road, or some just learn quickly, IrCOm still a bit generally better particularly at techy climbs which I like both Gravel And MTB, the
    MTB is arguably a bit over-geared, though suspension and even bigger tyres
    mean itrCOs much less likely to stall on slabs or roots.

    Do get some, who are either inexperienced or too anxious ie the thing bit
    like kayaking of obsessing on that rock/root and not letting it flow.

    Roger Merriman

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Sat Nov 14 13:51:24 2026
    From Newsgroup: rec.bicycles.tech

    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red >>> to die for. It will be ready Tuesday. Hopefully my headset willo be in by >>> then. The threads will have to be cleaned. I have Italian BB of my Campy >>> Record cranks and the rst of the stuff is LTWoo 10 speed and after two
    weeks the Vittoria tires and Perelli tubes still feel pumped up. I have
    to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I
    pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after >>> 19 miles I can hardly walk. I felt rvery pebble. The calculator says that >>> I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesn?t have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased
    significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on
    gravel bikes as they don?t move and thus have harsher ride as they haven?t >> leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky since it started
    life as a track biken Why else would you name it after a track?


    The Ascot isnrCOt a track bike, not sure yourCOve ever ridden one, even if itrCOs
    a road legal ie has brakes and maybe a free hub but itrCOs still a very distinct ride, with even by road race bike standards twitchy handling, considering they ride on very smooth surfaces, narrow tyres and high
    pressures are still the way to go.

    I had a Fuji one which I did like but it definitely had some compromises
    for riding on the road, its handling was fun and responsive or downright twitchy considering onerCOs viewpoint! Ie it was fun to ride but could be a handful!

    The gearing ie fixed or single speed or itrCOs brakes or max tyre width of
    25mm where less significant factors, fun bike but definitely had its compromises.

    Roger Merriman

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Sat Nov 14 07:58:58 2026
    From Newsgroup: rec.bicycles.tech

    On 11/14/2026 6:10 AM, zen cycle wrote:
    On 11/12/2026 5:37 PM, Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I
    picked out a red
    to die for. It will be ready Tuesday. Hopefully my
    headset willo be in by
    then. The threads will have to be cleaned. I have Italian
    BB of my Campy
    Record cranks and the rst of the stuff is LTWoo 10 speed
    and after two
    weeks the Vittoria tires and Perelli tubes still feel
    pumped up. I have
    to dig an 11-36 out of the parts box.

    When I had my '84 Basso GAP restored I decided to just strip
    the original candy apple red from the fork since I knew it
    was chrome plated from the previous nicks and dings the
    thing had suffered over the years. However I found that the
    plating job was pretty bad - they didn't do the finish work
    on the fork after the building it and there seemed to be
    just one layer of plating, revealing all the leftover
    tooling and welding/brazing marks. I took it to a local
    electroplating shop that specialized in custom motorcycle
    parts and asked what they could do. They stripped the
    plating, cleaned the whole thing up and gave it a couple of
    new layers. The thing was gorgeous after they were done.
    When I picked it up the shop owner said he was kind of
    dubious about the quality of a bicycle part, but said he was
    impressed with the build quality. He commented that it was
    too bad they didn't do the finish work.


    I'm doing a gravel ride with a friend so I will be riding
    my Raliegh. I
    pump-ed the 38's to 50 lbs and was that ever the wrong
    thing to do after
    19 miles I can hardly walk. I felt rvery pebble. The
    calculator says that
    I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a
    boneshaking ride off
    road, 38mm doesnrCOt have a lot of volume really so need to
    keep the
    pressures high to prevent pinch flats, hence tyre volume
    has increased
    significantly for gravel bikes with many/most newer bikes
    able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are
    very obvious on
    gravel bikes as they donrCOt move and thus have harsher ride
    as they havenrCOt
    leant to move/react to the lumps and bumps.



    "back in the day" that was the case around here too. However
    pretty much everyone I do regular road rides with over the
    past 15 years or so has extensive off-road riding and racing
    experience - most of them race CX. It's to the point now
    that the last few races I've been to are dominated by the
    riders with a lot of road racing experience. I attribute
    that to the about of endurance training they (we) carry from
    the road into the off-road events. When I was racing MTB, I
    did quite well winning a dozen or so "vet expert" races over
    those years (~1989 - 99) by being able to sustain the pace
    on the last lap of the race. I certainly wasn't the best
    bike handler but being able to push the pace on the less
    technical sections-a - especially in the more hilly events -
    gave me a big advantage.


    Chroming, or any plating including durable plate
    (copper-nickel-chrome) is cheap, but the preparation is
    expensive. It's tedious hand work at best and so there's no
    reason to finish the areas which will be painted over the
    plate. Typically the crown and ends are polished, the rest
    is left raw or even scuffed purposefully and the shiny bits
    are masked for painting.

    https://www.yellowjersey.org/photosfromthepast/bia25c.jpg

    https://www.yellowjersey.org/photosfromthepast/bia25h.jpg
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Sat Nov 14 22:43:13 2026
    From Newsgroup: rec.bicycles.tech

    On Sat Nov 14 07:10:33 2026 zen cycle wrote:

    "back in the day" that was the case around here too. However pretty much everyone I do regular road rides with over the past 15 years or so has extensive off-road riding and racing experience - most of them race CX.
    It's to the point now that the last few races I've been to are dominated
    by the riders with a lot of road racing experience. I attribute that to
    the about of endurance training they (we) carry from the road into the off-road events. When I was racing MTB, I did quite well winning a dozen
    or so "vet expert" races over those years (~1989 - 99) by being able to sustain the pace on the last lap of the race. I certainly wasn't the
    best bike handler but being able to push the pace on the less technical sections - especially in the more hilly events - gave me a big advantage.
    When I found that NOS Basso Loto frame they also had a NOS Gap frameset in my size. I really should have bought the Gap since my first good bike was a Gap and it handled better and was slightly lighter than the Loto. I'm hoping that the Ascot handles as well as the Gap and it is presently in the powder coater. I'll post some pictureds when I'm don4e. I think I'm going to use a quill stem. I've got a couplr of Cinelli stems and a Ritchey bar to fit. The LTWoo levers work like Campy but the downshift button is further forward and more convenient. From the feel I bet they hsvr the same reliability and IF they fail buying s new lever is cheaper than buying s Csmpy small part.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Sat Nov 14 22:57:36 2026
    From Newsgroup: rec.bicycles.tech

    On Sat Nov 14 13:51:24 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red >>> to die for. It will be ready Tuesday. Hopefully my headset willo be in by >>> then. The threads will have to be cleaned. I have Italian BB of my Campy >>> Record cranks and the rst of the stuff is LTWoo 10 speed and after two >>> weeks the Vittoria tires and Perelli tubes still feel pumped up. I have >>> to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I >>> pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after >>> 19 miles I can hardly walk. I felt rvery pebble. The calculator says that >>> I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesn?t have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased
    significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on >> gravel bikes as they don?t move and thus have harsher ride as they haven?t >> leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky since it started life as a track biken Why else would you name it after a track?


    The Ascot isn?t a track bike, not sure you?ve ever ridden one, even if it?s
    a road legal ie has brakes and maybe a free hub but it?s still a very distinct ride, with even by road race bike standards twitchy handling, considering they ride on very smooth surfaces, narrow tyres and high pressures are still the way to go.

    I had a Fuji one which I did like but it definitely had some compromises
    for riding on the road, its handling was fun and responsive or downright twitchy considering one?s viewpoint! Ie it was fun to ride but could be a handful!

    The gearing ie fixed or single speed or it?s brakes or max tyre width of
    25mm where less significant factors, fun bike but definitely had its compromises.
    Roger, I'm pretty sure that I saw Track Ascots with the rear facing dropouts. I could be mistaken but I seem to remember road andf track Ascots. When they first came out I was hot to get one. Loto's are a genuine pain in the ass. The first Loto I had used custom tubing built especially for Basso and it was a great handling ike. But the one's made out of Columbus didn't handle as well and the one I've got now has custom tubing that acts nothing like the first one I had. ???I think that the Gap used Thron tubing and most riders prefered that to the fancier more expensive double butted tubes.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From zen cycle@funkmasterxx@hotmail.com to rec.bicycles.tech on Sat Nov 14 18:42:21 2026
    From Newsgroup: rec.bicycles.tech

    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red >>>> to die for. It will be ready Tuesday. Hopefully my headset willo be in by >>>> then. The threads will have to be cleaned. I have Italian BB of my Campy >>>> Record cranks and the rst of the stuff is LTWoo 10 speed and after two >>>> weeks the Vittoria tires and Perelli tubes still feel pumped up. I have >>>> to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I >>>> pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after >>>> 19 miles I can hardly walk. I felt rvery pebble. The calculator says that >>>> I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesn?t have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased
    significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on >>> gravel bikes as they don?t move and thus have harsher ride as they haven?t >>> leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky since it started
    life as a track biken Why else would you name it after a track?

    Dear gawd....no, tommy, the Ascot was never a track bike, and there is
    no track (velodrome) called Ascot. the Basso Ascot has road racing
    geometry, vertical dropouts, drilled brake bridges,and downtube shifter braze-ons. Track bikes have none of those things, and the rear dropouts
    on a track bike are horizontal, opened at the rear.

    Basso makes track bikes under the "Pista" model...Guess what Pista means
    in Italian.

    The Ascot was originally conceived, built, and marketed as a 'Boutique
    Bike' as much at home on a grueling road race course as it is hanging in
    the foyer of an upper middle class home. They likely named it after the
    Ascot Horse Racing track in England (about 25 miles SE of london) as an
    appeal to an elite sensibility. But it ain't no track bike.

    Here's a love letter from an October 1989 edition of Bicycle Guide. https://www.bikeforums.net/classic-vintage/1269453-road-test-bike-review-1989-basso-ascot.html



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From zen cycle@funkmasterxx@hotmail.com to rec.bicycles.tech on Sat Nov 14 18:51:18 2026
    From Newsgroup: rec.bicycles.tech

    On 11/14/2026 8:51 AM, Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red >>>> to die for. It will be ready Tuesday. Hopefully my headset willo be in by >>>> then. The threads will have to be cleaned. I have Italian BB of my Campy >>>> Record cranks and the rst of the stuff is LTWoo 10 speed and after two >>>> weeks the Vittoria tires and Perelli tubes still feel pumped up. I have >>>> to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I >>>> pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after >>>> 19 miles I can hardly walk. I felt rvery pebble. The calculator says that >>>> I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off
    road, 38mm doesn?t have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased
    significantly for gravel bikes with many/most newer bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on >>> gravel bikes as they don?t move and thus have harsher ride as they haven?t >>> leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky since it started
    life as a track biken Why else would you name it after a track?


    The Ascot isnrCOt a track bike, not sure yourCOve ever ridden one, even if itrCOs
    a road legal ie has brakes and maybe a free hub but itrCOs still a very distinct ride, with even by road race bike standards twitchy handling, considering they ride on very smooth surfaces, narrow tyres and high pressures are still the way to go.

    I had a Fuji one which I did like but it definitely had some compromises
    for riding on the road, its handling was fun and responsive or downright twitchy considering onerCOs viewpoint! Ie it was fun to ride but could be a handful!

    The gearing ie fixed or single speed or itrCOs brakes or max tyre width of 25mm where less significant factors, fun bike but definitely had its compromises.

    I have a Fuji Track Pro. I'm running 25C but I'm pretty sure I could fit
    up to a 30 if I wanted to. There isn't much point to that though. Having ridden fixed-gear road bikes for nearly 40 years, I'd hesitate to ride
    the Track Pro on the road. For one thing is has no brake drillings so I couldn't mount a brake if I wanted to, and there's no way in hell I'm
    riding on public roads with no brakes. Besides that it's extremely
    twitchy and extremely stiff (as a track bike should be). The twitch
    doesn't bother me much, but the stiffness would become unbearable after
    riding public roads for any amount of time - No problem on the local
    velodrome where the the biggest hazard might be leaves blowing onto the
    track.

    https://northeastvelodrome.wordpress.com/


    Roger Merriman


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Sun Nov 15 08:18:30 2026
    From Newsgroup: rec.bicycles.tech

    On 11/14/2026 4:57 PM, cyclintom wrote:
    On Sat Nov 14 13:51:24 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red >>>>> to die for. It will be ready Tuesday. Hopefully my headset willo be in by >>>>> then. The threads will have to be cleaned. I have Italian BB of my Campy >>>>> Record cranks and the rst of the stuff is LTWoo 10 speed and after two >>>>> weeks the Vittoria tires and Perelli tubes still feel pumped up. I have >>>>> to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I >>>>> pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after >>>>> 19 miles I can hardly walk. I felt rvery pebble. The calculator says that >>>>> I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off >>>> road, 38mm doesn?t have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased >>>> significantly for gravel bikes with many/most newer bikes able to take >>>> older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on >>>> gravel bikes as they don?t move and thus have harsher ride as they haven?t >>>> leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky since it started >>> life as a track biken Why else would you name it after a track?


    The Ascot isn?t a track bike, not sure you?ve ever ridden one, even if it?s >> a road legal ie has brakes and maybe a free hub but it?s still a very
    distinct ride, with even by road race bike standards twitchy handling,
    considering they ride on very smooth surfaces, narrow tyres and high
    pressures are still the way to go.

    I had a Fuji one which I did like but it definitely had some compromises
    for riding on the road, its handling was fun and responsive or downright
    twitchy considering one?s viewpoint! Ie it was fun to ride but could be a
    handful!

    The gearing ie fixed or single speed or it?s brakes or max tyre width of
    25mm where less significant factors, fun bike but definitely had its
    compromises.




    Roger, I'm pretty sure that I saw Track Ascots with the rear facing dropouts. I could be mistaken but I seem to remember road andf track Ascots. When they first came out I was hot to get one. Loto's are a genuine pain in the ass. The first Loto I had used custom tubing built especially for Basso and it was a great handling ike. But the one's made out of Columbus didn't handle as well and the one I've got now has custom tubing that acts nothing like the first one I had. ???I think that the Gap used Thron tubing and most riders prefered that to the fancier more expensive double butted tubes.

    Basso Gap are SP/SL Cyclex, not Thron.

    https://2velo.com/wp-content/uploads/2014/03/21.jpg#main
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Sun Nov 15 08:20:35 2026
    From Newsgroup: rec.bicycles.tech

    On 11/14/2026 5:51 PM, zen cycle wrote:
    On 11/14/2026 8:51 AM, Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman-a wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot.
    I picked out a red
    to die for. It will be ready Tuesday. Hopefully my
    headset willo be in by
    then. The threads will have to be cleaned. I have
    Italian BB of my Campy
    Record cranks and the rst of the stuff is LTWoo 10
    speed and after two
    weeks the Vittoria tires and Perelli tubes still feel
    pumped up. I have
    to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be
    riding my Raliegh. I
    pump-ed the 38's to 50 lbs and was that ever the wrong
    thing to do after
    19 miles I can hardly walk. I felt rvery pebble. The
    calculator says that
    I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a
    boneshaking ride off
    road, 38mm doesn?t have a lot of volume really so need
    to keep the
    pressures high to prevent pinch flats, hence tyre volume
    has increased
    significantly for gravel bikes with many/most newer
    bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are
    very obvious on
    gravel bikes as they don?t move and thus have harsher
    ride as they haven?t
    leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky
    since it started
    life as a track biken Why else would you name it after a
    track?


    The Ascot isnrCOt a track bike, not sure yourCOve ever ridden
    one, even if itrCOs
    a road legal ie has brakes and maybe a free hub but itrCOs
    still a very
    distinct ride, with even by road race bike standards
    twitchy handling,
    considering they ride on very smooth surfaces, narrow
    tyres and high
    pressures are still the way to go.

    I had a Fuji one which I did like but it definitely had
    some compromises
    for riding on the road, its handling was fun and
    responsive or downright
    twitchy considering onerCOs viewpoint! Ie it was fun to ride
    but could be a
    handful!

    The gearing ie fixed or single speed or itrCOs brakes or max
    tyre width of
    25mm where less significant factors, fun bike but
    definitely had its
    compromises.

    I have a Fuji Track Pro. I'm running 25C but I'm pretty sure
    I could fit up to a 30 if I wanted to. There isn't much
    point to that though. Having ridden fixed-gear road bikes
    for nearly 40 years, I'd hesitate to ride the Track Pro on
    the road. For one thing is has no brake drillings so I
    couldn't mount a brake if I wanted to, and there's no way in
    hell I'm riding on public roads with no brakes. Besides that
    it's extremely twitchy and extremely stiff (as a track bike
    should be). The twitch doesn't bother me much, but the
    stiffness would become unbearable after riding public roads
    for any amount of time - No problem on the local velodrome
    where the the biggest hazard might be leaves blowing onto
    the track.

    https://northeastvelodrome.wordpress.com/



    "...no way in hell I'm riding on public roads with no brakes."

    +1
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Sun Nov 15 18:59:53 2026
    From Newsgroup: rec.bicycles.tech

    On Sat Nov 14 18:42:21 2026 zen cycle wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot. I picked out a red
    to die for. It will be ready Tuesday. Hopefully my headset willo be in by
    then. The threads will have to be cleaned. I have Italian BB of my Campy >>>> Record cranks and the rst of the stuff is LTWoo 10 speed and after two >>>> weeks the Vittoria tires and Perelli tubes still feel pumped up. I have >>>> to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be riding my Raliegh. I >>>> pump-ed the 38's to 50 lbs and was that ever the wrong thing to do after >>>> 19 miles I can hardly walk. I felt rvery pebble. The calculator says that
    I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a boneshaking ride off >>> road, 38mm doesn?t have a lot of volume really so need to keep the
    pressures high to prevent pinch flats, hence tyre volume has increased >>> significantly for gravel bikes with many/most newer bikes able to take >>> older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are very obvious on >>> gravel bikes as they don?t move and thus have harsher ride as they haven?t
    leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky since it started >> life as a track biken Why else would you name it after a track?

    Dear gawd....no, tommy, the Ascot was never a track bike, and there is
    no track (velodrome) called Ascot. the Basso Ascot has road racing
    geometry, vertical dropouts, drilled brake bridges,and downtube shifter braze-ons. Track bikes have none of those things, and the rear dropouts
    on a track bike are horizontal, opened at the rear.

    Basso makes track bikes under the "Pista" model...Guess what Pista means
    in Italian.

    The Ascot was originally conceived, built, and marketed as a 'Boutique
    Bike' as much at home on a grueling road race course as it is hanging in
    the foyer of an upper middle class home. They likely named it after the
    Ascot Horse Racing track in England (about 25 miles SE of london) as an appeal to an elite sensibility. But it ain't no track bike.

    Here's a love letter from an October 1989 edition of Bicycle Guide. https://www.bikeforums.net/classic-vintage/1269453-road-test-bike-review-1989-basso-ascot.html
    Ascot is a one mile paved oval track in southern California. Your bike forums reference is useless since I was banned from that group after I was injured. Maybe I was bickering. Since I have no mem0ory of that time I have no idea of the cause and you have to wonder what sort of group carries a grudge for over 15 years
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Sun Nov 15 19:29:07 2026
    From Newsgroup: rec.bicycles.tech

    On Sun Nov 15 08:18:30 2026 AMuzi wrote:

    Basso Gap are SP/SL Cyclex, not Thron.

    https://2velo.com/wp-content/uploads/2014/03/21.jpg#main
    From year to year the Gap was made from different tubing. Looking about I've found Columbus Tretubing to Basso special tubing whyatever that is.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Sun Nov 15 14:06:33 2026
    From Newsgroup: rec.bicycles.tech

    On 11/15/2026 1:29 PM, cyclintom wrote:
    On Sun Nov 15 08:18:30 2026 AMuzi wrote:

    Basso Gap are SP/SL Cyclex, not Thron.

    https://2velo.com/wp-content/uploads/2014/03/21.jpg#main




    From year to year the Gap was made from different tubing. Looking about I've found Columbus Tretubing to Basso special tubing whyatever that is.

    Basso Tretubi was only for a few years, contemporaneously
    with Gap. Different model at a very different price point,
    and typical of midsize framebuilders' offerings then.

    1980 (no Tretubi) catalog here: https://bikalog.org/api/view/Basso/1981/basso-1981.pdf

    example:
    https://bikeindex.org/registrations/32049

    Since the difference in material cost is small, Tretubi is
    'senza cromata' to help differentiate the pricing.
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Jeff Liebermann@jeffl@cruzio.com to rec.bicycles.tech on Sun Nov 15 13:31:51 2026
    From Newsgroup: rec.bicycles.tech

    On Sun, 15 Nov 2026 18:59:53 GMT, cyclintom <cyclintom@yahoo.com>
    wrote:

    Ascot is a one mile paved oval track in southern California. Your bike forums reference is useless since I was banned from that group after I was injured. Maybe I was bickering. Since I have no mem0ory of that time I have no idea of the cause and you have to wonder what sort of group carries a grudge for over 15 years

    I thought you were banned from "Bicycling Magazine forum", which
    doesn't exist. Bicycling Magazine does not have an online forum. <https://chatgpt.com/share/6afa241c-68bc-83e8-a343-e34cb155c2e7>

    <https://groups.google.com/g/rec.bicycles.tech/c/Wt95T4jv-U0/m/9L2eyx7hAAAJ> May 25, 2023, 3:29:41aPM
    "I am banned from the Bicycling Magazine forum. But you aren't missing
    much. The questions and answers are all from airheads like Frank and
    John. Jeff and Flunky aren't exactly airheads but they want to be."
    --
    Jeff Liebermann jeffl@cruzio.com
    PO Box 272 http://www.LearnByDestroying.com
    Ben Lomond CA 95005-0272 AE6KS 831-336-2558

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Sun Nov 15 23:37:31 2026
    From Newsgroup: rec.bicycles.tech

    AMuzi <am@yellowjersey.org> wrote:
    On 11/14/2026 5:51 PM, zen cycle wrote:
    On 11/14/2026 8:51 AM, Roger Merriman wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    On Thu Nov 12 22:37:45 2026 Roger Merriman-a wrote:
    cyclintom <cyclintom@yahoo.com> wrote:
    The local powder coating house now has my Basso Ascot.
    I picked out a red
    to die for. It will be ready Tuesday. Hopefully my
    headset willo be in by
    then. The threads will have to be cleaned. I have
    Italian BB of my Campy
    Record cranks and the rst of the stuff is LTWoo 10
    speed and after two
    weeks the Vittoria tires and Perelli tubes still feel
    pumped up. I have
    to dig an 11-36 out of the parts box.

    I'm doing a gravel ride with a friend so I will be
    riding my Raliegh. I
    pump-ed the 38's to 50 lbs and was that ever the wrong
    thing to do after
    19 miles I can hardly walk. I felt rvery pebble. The
    calculator says that
    I was 10 psi over ideal but that was terrific.

    38mm at 50 psi would be lovely on tarmac but be a
    boneshaking ride off
    road, 38mm doesn?t have a lot of volume really so need
    to keep the
    pressures high to prevent pinch flats, hence tyre volume
    has increased
    significantly for gravel bikes with many/most newer
    bikes able to take
    older XC MTB tyres,.

    Being able to float over the bumps is skill, roadies are
    very obvious on
    gravel bikes as they don?t move and thus have harsher
    ride as they haven?t
    leant to move/react to the lumps and bumps.




    The Ascot will just take 28 mm tires. And that is lucky
    since it started
    life as a track biken Why else would you name it after a
    track?


    The Ascot isnrCOt a track bike, not sure yourCOve ever ridden
    one, even if itrCOs
    a road legal ie has brakes and maybe a free hub but itrCOs
    still a very
    distinct ride, with even by road race bike standards
    twitchy handling,
    considering they ride on very smooth surfaces, narrow
    tyres and high
    pressures are still the way to go.

    I had a Fuji one which I did like but it definitely had
    some compromises
    for riding on the road, its handling was fun and
    responsive or downright
    twitchy considering onerCOs viewpoint! Ie it was fun to ride
    but could be a
    handful!

    The gearing ie fixed or single speed or itrCOs brakes or max
    tyre width of
    25mm where less significant factors, fun bike but
    definitely had its
    compromises.

    I have a Fuji Track Pro. I'm running 25C but I'm pretty sure
    I could fit up to a 30 if I wanted to. There isn't much
    point to that though. Having ridden fixed-gear road bikes
    for nearly 40 years, I'd hesitate to ride the Track Pro on
    the road. For one thing is has no brake drillings so I
    couldn't mount a brake if I wanted to, and there's no way in
    hell I'm riding on public roads with no brakes. Besides that
    it's extremely twitchy and extremely stiff (as a track bike
    should be). The twitch doesn't bother me much, but the
    stiffness would become unbearable after riding public roads
    for any amount of time - No problem on the local velodrome
    where the the biggest hazard might be leaves blowing onto
    the track.

    https://northeastvelodrome.wordpress.com/



    "...no way in hell I'm riding on public roads with no brakes."

    +1


    Kids when I was growing up used to occasionally ride down the local steep
    hill, the valley is a gorge so itrCOs all steep! And have brakeless BMXrCOs and thus jam their shoe into the rear triangle which canrCOt of done the shoes
    much good!

    Had fun last year with my folks mobility scooter which as itrCOs off road capable, has the torque to climb hills, and took it up that hill which hits
    and holds 25% in two places and averages 17% remarkably the scooter made it
    up, if made some IrCOm not happy noises! Though more fun/worrying was coming back down as it only has rear brakes so was mainly drifting than slowing!

    Some of the folks in the village their scooters/wheelchair canrCOt make it up the rCLgentlerCY hill which is only 10% or so but such devices are still built to idea that disabled or just old folks just roll around hospital type
    settings hence the design hasnrCOt changed much in over 100 years, despite
    the various mature bike technologies that exist!

    Roger Merriman
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Ted Heise@theise@panix.com to rec.bicycles.tech on Mon Nov 16 15:07:07 2026
    From Newsgroup: rec.bicycles.tech

    On 15 Nov 2026 23:37:31 GMT,
    Roger Merriman <roger@sarlet.com> wrote:
    AMuzi <am@yellowjersey.org> wrote:
    On 11/14/2026 5:51 PM, zen cycle wrote:

    I have a Fuji Track Pro. I'm running 25C but I'm pretty sure
    I could fit up to a 30 if I wanted to. There isn't much
    point to that though. Having ridden fixed-gear road bikes
    for nearly 40 years, I'd hesitate to ride the Track Pro on
    the road. For one thing is has no brake drillings so I
    couldn't mount a brake if I wanted to, and there's no way in
    hell I'm riding on public roads with no brakes...

    "...no way in hell I'm riding on public roads with no brakes."

    +1

    +2 (as I've said here before)


    Kids when I was growing up used to occasionally ride down the
    local steep hill, the valley is a gorge so itrCOs all steep! And
    have brakeless BMXrCOs and thus jam their shoe into the rear
    triangle which canrCOt of done the shoes much good!

    Roger, I'm curious about that "can't of done" usage. It sounds to
    me decidedly British. In the U.S. I think the "correct" form
    would be "can't have done" and I'm wondering how/if that applies
    in the UK? My apologies if that comes off as critical--it's not
    meant that way.
    --
    Ted Heise <theise@panix.com> Gretna, NE, USA
    --- Synchronet 3.22a-Linux NewsLink 1.2