I decided to take a shorter rout than most Sundays. So I did 27 miles
rather than 34 to 40. This tyurned out to be a fast ride with me making
about a full mph faster average speed than normal.My Basso Ascot will probaboly show up Tuesday and it should take me a couple of hours to assemble. 10 speed bikes are becoming my favorite. LTWoo parts are so
chaap that it is hard to think of Campy except for cranks and now I'm
sold on Record cranks with steel shafts. Because cranks haven't really changed for 100 years, good parts will be available forever. I hve a set
of Octalink cranks for British threads that are lighter than Super
Record. And the bearings are moer reliabler. I suppose the same could be
said of square taper but Shimano and FSA and SRAM were different from Campy.
I'm getting away from pain in the butt things like Tubeless Tires and Tubeless tims. A standard innertube and a clincher rim are so much esaier
to change on the side of the road. Internal wiring is such a royal pain
in the ass. I did learn how to deal with it and the last time I installed
it it barely took more time than exterrnal wiring but I do NOT like
running wires through plastic tubes. It take a type of tube with just the proper ridgidity. External wiring is so much easier. though I with the
Ascot had the plastic replaceable under-the-BB cable guide rather than cast in guides.
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 76 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 57:53:22 |
| Calls: | 1,265 |
| Calls today: | 1 |
| Files: | 1,362 |
| D/L today: |
4 files (9,632K bytes) |
| Messages: | 285,955 |