• Searching for timing chain rings

    From Ted Heise@theise@panix.com to rec.bicycles.tech on Mon Oct 26 20:04:23 2026
    From Newsgroup: rec.bicycles.tech


    Hey Andrew (or anyone), I need to replace the timing rings on my
    tandem. The current set is marked 7075-CNC 40T 130 BCD and they
    fit an 8-speed chain. I ordered a set that seemed right, but the
    local shop noted they are "narrow/wide" (which I'd never heard
    of), and unlikely to work well.

    Everything I find online is either labeled narrow wide, or is
    ambiguous. Any hints on where to look?
    --
    Ted Heise <theise@panix.com> Gretna, NE, USA
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Mon Oct 26 20:22:50 2026
    From Newsgroup: rec.bicycles.tech

    Ted Heise <theise@panix.com> wrote:

    Hey Andrew (or anyone), I need to replace the timing rings on my
    tandem. The current set is marked 7075-CNC 40T 130 BCD and they
    fit an 8-speed chain. I ordered a set that seemed right, but the
    local shop noted they are "narrow/wide" (which I'd never heard
    of), and unlikely to work well.

    Everything I find online is either labeled narrow wide, or is
    ambiguous. Any hints on where to look?


    Narrow wide, is for 1by group sets, it helps chain retention so donrCOt need
    a chain catcher, and thus IrCOd assume the chain wouldnrCOt willingly shift chainrings.

    Roger Merriman

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Mon Oct 26 15:55:09 2026
    From Newsgroup: rec.bicycles.tech

    On 10/26/2026 3:04 PM, Ted Heise wrote:
    Hey Andrew (or anyone), I need to replace the timing rings on my
    tandem. The current set is marked 7075-CNC 40T 130 BCD and they
    fit an 8-speed chain. I ordered a set that seemed right, but the
    local shop noted they are "narrow/wide" (which I'd never heard
    of), and unlikely to work well.

    Everything I find online is either labeled narrow wide, or is
    ambiguous. Any hints on where to look?


    The narrow-wide format costs more generally and it has zero
    benefit for this application. Return them.
    Get two matching (same tooth count) 130mm rings in your
    preferred color or lack thereof.

    Ultra small timing rings are known for premature failure,
    but 130mm rings have to be 38t or bigger, so no problem to
    you. You'll find 42 or 39 generally cheapest because a lot
    are made. Mid size (44, 46, 48) are relatively pricey due to
    smaller volumes. Technically, size doesn't matter for
    anything which fits your crank. You do not need Famous
    Brand, nor shift ramps nor stainless pins nor shaped or
    truncated teeth. Just a basic 130mm same-size pair, cheap.

    Here, least expensive are SHUN (Taiwan ROC) 39t at $39.95 https://abm.world/en/suppliers-query/shun-shing-industry-co-ltd/

    p.s. Any 3/32" chainring (aside from narrow-wide) can take
    any chain- 5 speed or 12 speed - on the same tooth. The
    recommendation has to do with distance to the adjacent
    chainring (which you do not have) not actual tooth width.
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Ted Heise@theise@panix.com to rec.bicycles.tech on Tue Oct 27 01:59:41 2026
    From Newsgroup: rec.bicycles.tech

    On Mon, 26 Oct 2026 15:55:09 -0500,
    AMuzi <am@yellowjersey.org> wrote:
    On 10/26/2026 3:04 PM, Ted Heise wrote:
    Hey Andrew (or anyone), I need to replace the timing rings on
    my tandem. The current set is marked 7075-CNC 40T 130 BCD and
    they fit an 8-speed chain. I ordered a set that seemed right,
    but the local shop noted they are "narrow/wide" (which I'd
    never heard of), and unlikely to work well.

    Everything I find online is either labeled narrow wide, or is
    ambiguous. Any hints on where to look?

    The narrow-wide format costs more generally and it has zero
    benefit for this application. Return them.

    I donated them to the local shop. He implied the chain would not
    seat well on them.


    Get two matching (same tooth count) 130mm rings in your
    preferred color or lack thereof.

    Ultra small timing rings are known for premature failure, but
    130mm rings have to be 38t or bigger, so no problem to you.
    You'll find 42 or 39 generally cheapest because a lot are made.
    Mid size (44, 46, 48) are relatively pricey due to smaller
    volumes. Technically, size doesn't matter for anything which
    fits your crank. You do not need Famous Brand, nor shift ramps
    nor stainless pins nor shaped or truncated teeth. Just a basic
    130mm same-size pair, cheap.

    Here, least expensive are SHUN (Taiwan ROC) 39t at $39.95
    https://abm.world/en/suppliers-query/shun-shing-industry-co-ltd/

    I could not find specific parts on that site (seemed tough to
    navigate), but I think these will work...

    https://www.probikesupply.com/products/shimano-alfine-s501-39t-130mm-chainring-black-for-double-guard?variant=40617034514487&srsltid=AU7gw4VR5LJJJWuPYDRO4p0vPmIxsB0j5mq3WrZZjEM-6Q9cd9GWyi276eA


    p.s. Any 3/32" chainring (aside from narrow-wide) can take any
    chain- 5 speed or 12 speed - on the same tooth. The
    recommendation has to do with distance to the adjacent
    chainring (which you do not have) not actual tooth width.

    Oh, good to know. Thanks, as always!
    --
    Ted Heise <theise@panix.com> Gretna, NE, USA
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Tue Oct 27 10:31:29 2026
    From Newsgroup: rec.bicycles.tech

    Ted Heise <theise@panix.com> wrote:
    On Mon, 26 Oct 2026 15:55:09 -0500,
    AMuzi <am@yellowjersey.org> wrote:
    On 10/26/2026 3:04 PM, Ted Heise wrote:
    Hey Andrew (or anyone), I need to replace the timing rings on
    my tandem. The current set is marked 7075-CNC 40T 130 BCD and
    they fit an 8-speed chain. I ordered a set that seemed right,
    but the local shop noted they are "narrow/wide" (which I'd
    never heard of), and unlikely to work well.

    Everything I find online is either labeled narrow wide, or is
    ambiguous. Any hints on where to look?

    The narrow-wide format costs more generally and it has zero
    benefit for this application. Return them.

    I donated them to the local shop. He implied the chain would not
    seat well on them.

    The reverse the chain would be locked in place and be reluctant to shift of
    the chain ring, you use normal chains with, narrow/wide.

    Get two matching (same tooth count) 130mm rings in your
    preferred color or lack thereof.

    Ultra small timing rings are known for premature failure, but
    130mm rings have to be 38t or bigger, so no problem to you.
    You'll find 42 or 39 generally cheapest because a lot are made.
    Mid size (44, 46, 48) are relatively pricey due to smaller
    volumes. Technically, size doesn't matter for anything which
    fits your crank. You do not need Famous Brand, nor shift ramps
    nor stainless pins nor shaped or truncated teeth. Just a basic
    130mm same-size pair, cheap.

    Here, least expensive are SHUN (Taiwan ROC) 39t at $39.95
    https://abm.world/en/suppliers-query/shun-shing-industry-co-ltd/

    I could not find specific parts on that site (seemed tough to
    navigate), but I think these will work...

    https://www.probikesupply.com/products/shimano-alfine-s501-39t-130mm-chainring-black-for-double-guard?variant=40617034514487&srsltid=AU7gw4VR5LJJJWuPYDRO4p0vPmIxsB0j5mq3WrZZjEM-6Q9cd9GWyi276eA


    p.s. Any 3/32" chainring (aside from narrow-wide) can take any
    chain- 5 speed or 12 speed - on the same tooth. The
    recommendation has to do with distance to the adjacent
    chainring (which you do not have) not actual tooth width.

    Oh, good to know. Thanks, as always!

    Roger Merriman


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Ted Heise@theise@panix.com to rec.bicycles.tech on Tue Oct 27 14:20:26 2026
    From Newsgroup: rec.bicycles.tech

    On 27 Oct 2026 10:31:29 GMT,
    Roger Merriman <roger@sarlet.com> wrote:
    Ted Heise <theise@panix.com> wrote:
    On Mon, 26 Oct 2026 15:55:09 -0500,
    AMuzi <am@yellowjersey.org> wrote:
    On 10/26/2026 3:04 PM, Ted Heise wrote:
    Hey Andrew (or anyone), I need to replace the timing rings
    on my tandem. The current set is marked 7075-CNC 40T 130
    BCD and they fit an 8-speed chain. I ordered a set that
    seemed right, but the local shop noted they are
    "narrow/wide" (which I'd never heard of), and unlikely to
    work well.

    The narrow-wide format costs more generally and it has zero
    benefit for this application. Return them.

    I donated them to the local shop. He implied the chain would
    not seat well on them.

    The reverse the chain would be locked in place and be reluctant
    to shift of the chain ring, you use normal chains with,
    narrow/wide.

    Just to clarify, these are for the timing chain on a tandem, no
    shifting involved.
    --
    Ted Heise <theise@panix.com> Gretna, NE, USA
    --- Synchronet 3.22a-Linux NewsLink 1.2