• Yesterday Trike update

    From Mark J cleary@mcleary08@comcast.net to rec.bicycles.tech on Wed Oct 14 11:47:56 2026
    From Newsgroup: rec.bicycles.tech

    I went out yesterday to check my Catrike for some indexing of the gears
    Sram bar lever 10 spd. Then I figure out the rear derailleur a SRAM GX
    Type 2.1 had some play at the plave of the B tension screw. The screw
    would go down but enough play in the cam to not catch the screw to
    increase angle. Maybe just rough handling or some crazy pedaling I do
    did it in.

    A had a new one thinking this might be going bad awhile ago. I put the derailleur in and boom the Catrike shifter like a dream this morning on
    41 mile ride.

    I did a search and found the replacement kit for this so apparently this
    can be replaced. Maybe it will salvage the old RD. But a total new one
    is $64 the part is $25. I don't know? 11.7518.042.000
    11.7518.018.001
    GoTo
    Index
    DESCRIPTION
    REAR DERAILLEUR B-BOLT AND SCREW KIT GX 2X10
    --
    Deacon Mark

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Thu Oct 15 09:35:08 2026
    From Newsgroup: rec.bicycles.tech

    Mark J cleary <mcleary08@comcast.net> wrote:
    I went out yesterday to check my Catrike for some indexing of the gears
    Sram bar lever 10 spd. Then I figure out the rear derailleur a SRAM GX
    Type 2.1 had some play at the plave of the B tension screw. The screw
    would go down but enough play in the cam to not catch the screw to
    increase angle. Maybe just rough handling or some crazy pedaling I do
    did it in.

    DoesnrCOt sound likely, unless yourCOve moved the derailleur over multiple bikes over many decades, for the B tension screw mechanism to have worn, ie maybe Tom only? As the tension screw is an installation set up only.

    The cage can get bent and or hanger bent, commuter bikes can get knocked
    about parked up etc so are common for that, with MTB/Gravel such impacts
    tend to be more dramatic ie mangled!

    I have had one get sloppy wear within it, still shifted but sluggish rather like if yourCOve got worn jockey wheels/chain. And one rather amusingly
    became detached was relatively budget mech so glued together!

    But in general they just last for decades!

    A had a new one thinking this might be going bad awhile ago. I put the derailleur in and boom the Catrike shifter like a dream this morning on
    41 mile ride.

    I did a search and found the replacement kit for this so apparently this
    can be replaced. Maybe it will salvage the old RD. But a total new one
    is $64 the part is $25. I don't know? 11.7518.042.000
    11.7518.018.001
    GoTo
    Index
    DESCRIPTION
    REAR DERAILLEUR B-BOLT AND SCREW KIT GX 2X10

    Kinda depends if you need or want another rear mech? Or just want to fix it because which i absolutely get, hate waste in general, and will generally
    get stuff fixed well beyond itrCOs worth it from a financial standpoint!

    Roger Merriman


    --- Synchronet 3.22a-Linux NewsLink 1.2