• New Chain Catrike

    From Mark J cleary@mcleary08@comcast.net to rec.bicycles.tech on Sat Oct 10 10:41:50 2026
    From Newsgroup: rec.bicycles.tech

    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old
    one and it was actully about 3 links short. I thought oh damn I need to
    buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok but
    can be tricky to get set and pop. I then threaded the chain through the system. I made 2 errors. I got in a hurry and missed going under the
    chain stay and went over. Stupid me. Then I missed getting it around the derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler. This
    give you more room to adjust the boom for various different cycling
    inseam measurements. On a demo you need to have all the customers be
    able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding it.
    I really was planning on keeping it on just because did not seem to make
    much difference. Well I then simply took the Chain Gobbler off and then
    the chain was perfect in measurement. It did make things even better for shifting and way less monkey business. Quieter I was a happy triker this morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain Gobbler
    and it actually suggested that taking it off it might not shift as well,
    and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt anything
    as such but clearly did not help if you never needed the crazy thing to
    begin with.
    --
    Deacon Mark

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Catrike Ryder@Soloman@old.bikers.org to rec.bicycles.tech on Sat Oct 10 12:20:51 2026
    From Newsgroup: rec.bicycles.tech

    On Sat, 10 Oct 2026 10:41:50 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old
    one and it was actully about 3 links short. I thought oh damn I need to
    buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok but
    can be tricky to get set and pop. I then threaded the chain through the >system. I made 2 errors. I got in a hurry and missed going under the
    chain stay and went over. Stupid me. Then I missed getting it around the >derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler. This >give you more room to adjust the boom for various different cycling
    inseam measurements. On a demo you need to have all the customers be
    able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding it.
    I really was planning on keeping it on just because did not seem to make >much difference. Well I then simply took the Chain Gobbler off and then
    the chain was perfect in measurement. It did make things even better for >shifting and way less monkey business. Quieter I was a happy triker this >morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain Gobbler
    and it actually suggested that taking it off it might not shift as well,
    and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt anything
    as such but clearly did not help if you never needed the crazy thing to >begin with.

    Buy chain by the foot from here.
    https://t-cycle.com/collections/chain-in-bulk?

    It's cheaper that way and only requires one master link.

    As for the chain gobbler, I agree, it's totally useless unless you
    need to adjust the boom for different people. I'm surprised that your
    700 came with one on.

    --
    C'est bon
    Soloman
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Sat Oct 10 11:47:27 2026
    From Newsgroup: rec.bicycles.tech

    On 10/10/2026 10:41 AM, Mark J cleary wrote:
    I went to do some checking on the shifting and clearly my
    chain was shot. I got 3 KMC 10 spd 116 link chains. I layed
    them out against old one and it was actully about 3 links
    short. I thought oh damn I need to buy 4 chains, but frankly
    thought I had room for fudge factor.

    I used all three together with quick link. Those quick links
    are ok but can be tricky to get set and pop. I then threaded
    the chain through the system. I made 2 errors. I got in a
    hurry and missed going under the chain stay and went over.
    Stupid me. Then I missed getting it around the derailleur
    properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned
    that in the least. Well my Catrike was a demo so came with
    extra chain gobbler. This give you more room to adjust the
    boom for various different cycling inseam measurements. On a
    demo you need to have all the customers be able to ride it
    so they install it.

    Well I really had no need for it actually since I am only
    one riding it. I really was planning on keeping it on just
    because did not seem to make much difference. Well I then
    simply took the Chain Gobbler off and then the chain was
    perfect in measurement. It did make things even better for
    shifting and way less monkey business. Quieter I was a happy
    triker this morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the
    Chain Gobbler and it actually suggested that taking it off
    it might not shift as well, and no more real drag entering
    the drive train.

    Let me tell you AI is full of garbage. Granted it did not
    hurt anything as such but clearly did not help if you never
    needed the crazy thing to begin with.

    There are now XL chains (140 links) for use with 'pedal
    forward', electrics and cargo bikes. Usually same price.
    That would keep you at 3 chains not four.
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mark J cleary@mcleary08@comcast.net to rec.bicycles.tech on Sat Oct 10 14:01:42 2026
    From Newsgroup: rec.bicycles.tech

    On 10/10/2026 11:20 AM, Catrike Ryder wrote:
    On Sat, 10 Oct 2026 10:41:50 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old
    one and it was actully about 3 links short. I thought oh damn I need to
    buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok but
    can be tricky to get set and pop. I then threaded the chain through the
    system. I made 2 errors. I got in a hurry and missed going under the
    chain stay and went over. Stupid me. Then I missed getting it around the
    derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler. This
    give you more room to adjust the boom for various different cycling
    inseam measurements. On a demo you need to have all the customers be
    able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding it.
    I really was planning on keeping it on just because did not seem to make
    much difference. Well I then simply took the Chain Gobbler off and then
    the chain was perfect in measurement. It did make things even better for
    shifting and way less monkey business. Quieter I was a happy triker this
    morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain Gobbler
    and it actually suggested that taking it off it might not shift as well,
    and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt anything
    as such but clearly did not help if you never needed the crazy thing to
    begin with.

    Buy chain by the foot from here. https://t-cycle.com/collections/chain-in-bulk?

    It's cheaper that way and only requires one master link.

    As for the chain gobbler, I agree, it's totally useless unless you
    need to adjust the boom for different people. I'm surprised that your
    700 came with one on.

    --
    C'est bon
    Soloman
    It came with this Catrike because it was the shop Demo 700 and they
    probably needed to be able to set the boom for vast differences in
    heights. I assume one can change there own inseam on the catrike by
    maybe 1 or 2 inches without it, but if you are 6'2 and then someone else
    rides it who is 5'5 it would not work. I got a really good break on the
    price being a demo. It was new so only $3500 and they are normally $4150.

    Thanks for the bulk chain length I am going to order some.
    --
    Deacon Mark
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mark J cleary@mcleary08@comcast.net to rec.bicycles.tech on Sat Oct 10 14:07:38 2026
    From Newsgroup: rec.bicycles.tech

    On 10/10/2026 11:20 AM, Catrike Ryder wrote:
    On Sat, 10 Oct 2026 10:41:50 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old
    one and it was actully about 3 links short. I thought oh damn I need to
    buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok but
    can be tricky to get set and pop. I then threaded the chain through the
    system. I made 2 errors. I got in a hurry and missed going under the
    chain stay and went over. Stupid me. Then I missed getting it around the
    derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler. This
    give you more room to adjust the boom for various different cycling
    inseam measurements. On a demo you need to have all the customers be
    able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding it.
    I really was planning on keeping it on just because did not seem to make
    much difference. Well I then simply took the Chain Gobbler off and then
    the chain was perfect in measurement. It did make things even better for
    shifting and way less monkey business. Quieter I was a happy triker this
    morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain Gobbler
    and it actually suggested that taking it off it might not shift as well,
    and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt anything
    as such but clearly did not help if you never needed the crazy thing to
    begin with.

    Buy chain by the foot from here. https://t-cycle.com/collections/chain-in-bulk?

    It's cheaper that way and only requires one master link.

    As for the chain gobbler, I agree, it's totally useless unless you
    need to adjust the boom for different people. I'm surprised that your
    700 came with one on.

    --
    C'est bon
    Soloman

    Also, does this sound right? It must be but more chain than most seem to
    use. I am 6'1 with a road cycling inseam of 35 inches and my recumbent
    inseam is around 43.5. My chain right now is 348 links which is 14.5
    feet long. That seems longer than most recumbent bikes but this is a 700.
    --
    Deacon Mark
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mark J cleary@mcleary08@comcast.net to rec.bicycles.tech on Sat Oct 10 14:43:18 2026
    From Newsgroup: rec.bicycles.tech

    On 10/10/2026 2:01 PM, Mark J cleary wrote:
    On 10/10/2026 11:20 AM, Catrike Ryder wrote:
    On Sat, 10 Oct 2026 10:41:50 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old
    one and it was actully about 3 links short. I thought oh damn I need to
    buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok but
    can be tricky to get set and pop. I then threaded the chain through the
    system. I made 2 errors. I got in a hurry and missed going under the
    chain stay and went over. Stupid me. Then I missed getting it around the >>> derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler. This >>> give you more room to adjust the boom for various different cycling
    inseam measurements. On a demo you need to have all the customers be
    able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding it. >>> I really was planning on keeping it on just because did not seem to make >>> much difference. Well I then simply took the Chain Gobbler off and then
    the chain was perfect in measurement. It did make things even better for >>> shifting and way less monkey business. Quieter I was a happy triker this >>> morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain Gobbler
    and it actually suggested that taking it off it might not shift as well, >>> and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt anything
    as such but clearly did not help if you never needed the crazy thing to
    begin with.

    Buy chain by the foot from here.
    https://t-cycle.com/collections/chain-in-bulk?

    It's cheaper that way and only requires one master link.

    As for the chain gobbler, I agree, it's totally useless unless you
    need to adjust the boom for different people. I'm surprised that your
    700 came with one on.

    --
    C'est bon
    Soloman
    It came with this Catrike because it was the shop Demo 700 and they
    probably needed to be able to set the boom for vast differences in
    heights. I assume one can change there own inseam on the catrike by
    maybe 1 or 2 inches without it, but if you are 6'2 and then someone else rides it who is 5'5 it would not work. I got a really good break on the price being a demo. It was new so only $3500 and they are normally $4150.

    Thanks for the bulk chain length I am going to order some.

    I just price the bulk 10 speed stuff and $9 a foot. Granted it is easier
    all one length but much more money than 3 KMC chains. I can get those
    chains at Amazon for $22 a chain. Way cheaper in fact, if it was closer
    I would just due to the hassell factor.
    --
    Deacon Mark
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Catrike Ryder@Soloman@old.bikers.org to rec.bicycles.tech on Sat Oct 10 16:15:40 2026
    From Newsgroup: rec.bicycles.tech

    On Sat, 10 Oct 2026 14:07:38 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    On 10/10/2026 11:20 AM, Catrike Ryder wrote:
    On Sat, 10 Oct 2026 10:41:50 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old
    one and it was actully about 3 links short. I thought oh damn I need to
    buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok but
    can be tricky to get set and pop. I then threaded the chain through the
    system. I made 2 errors. I got in a hurry and missed going under the
    chain stay and went over. Stupid me. Then I missed getting it around the >>> derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler. This >>> give you more room to adjust the boom for various different cycling
    inseam measurements. On a demo you need to have all the customers be
    able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding it. >>> I really was planning on keeping it on just because did not seem to make >>> much difference. Well I then simply took the Chain Gobbler off and then
    the chain was perfect in measurement. It did make things even better for >>> shifting and way less monkey business. Quieter I was a happy triker this >>> morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain Gobbler
    and it actually suggested that taking it off it might not shift as well, >>> and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt anything
    as such but clearly did not help if you never needed the crazy thing to
    begin with.

    Buy chain by the foot from here.
    https://t-cycle.com/collections/chain-in-bulk?

    It's cheaper that way and only requires one master link.

    As for the chain gobbler, I agree, it's totally useless unless you
    need to adjust the boom for different people. I'm surprised that your
    700 came with one on.

    --
    C'est bon
    Soloman

    Also, does this sound right? It must be but more chain than most seem to >use. I am 6'1 with a road cycling inseam of 35 inches and my recumbent >inseam is around 43.5. My chain right now is 348 links which is 14.5
    feet long. That seems longer than most recumbent bikes but this is a 700.

    I always order thirteen feet and it's only a few inches longer than I
    need. I've eliminated the return side chain tube and replaced it with
    idlers which might require a couple more links than with the tube. The
    700 is a bit longer than the expedition and you're an inch taller then
    me so thirteen feet could be little too short for you, but fourteen
    ought to work without the gobbler. They only sell in 1 foot
    increments.

    --
    C'est bon
    Soloman
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Catrike Ryder@Soloman@old.bikers.org to rec.bicycles.tech on Sat Oct 10 19:09:09 2026
    From Newsgroup: rec.bicycles.tech

    On Sat, 10 Oct 2026 14:43:18 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    On 10/10/2026 2:01 PM, Mark J cleary wrote:
    On 10/10/2026 11:20 AM, Catrike Ryder wrote:
    On Sat, 10 Oct 2026 10:41:50 -0500, Mark J cleary
    <mcleary08@comcast.net> wrote:

    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old >>>> one and it was actully about 3 links short. I thought oh damn I need to >>>> buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok but >>>> can be tricky to get set and pop. I then threaded the chain through the >>>> system. I made 2 errors. I got in a hurry and missed going under the
    chain stay and went over. Stupid me. Then I missed getting it around the >>>> derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler. This >>>> give you more room to adjust the boom for various different cycling
    inseam measurements. On a demo you need to have all the customers be
    able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding it. >>>> I really was planning on keeping it on just because did not seem to make >>>> much difference. Well I then simply took the Chain Gobbler off and then >>>> the chain was perfect in measurement. It did make things even better for >>>> shifting and way less monkey business. Quieter I was a happy triker this >>>> morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain Gobbler >>>> and it actually suggested that taking it off it might not shift as well, >>>> and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt anything >>>> as such but clearly did not help if you never needed the crazy thing to >>>> begin with.

    Buy chain by the foot from here.
    https://t-cycle.com/collections/chain-in-bulk?

    It's cheaper that way and only requires one master link.

    As for the chain gobbler, I agree, it's totally useless unless you
    need to adjust the boom for different people. I'm surprised that your
    700 came with one on.

    --
    C'est bon
    Soloman
    It came with this Catrike because it was the shop Demo 700 and they
    probably needed to be able to set the boom for vast differences in
    heights. I assume one can change there own inseam on the catrike by
    maybe 1 or 2 inches without it, but if you are 6'2 and then someone else
    rides it who is 5'5 it would not work. I got a really good break on the
    price being a demo. It was new so only $3500 and they are normally $4150.

    Thanks for the bulk chain length I am going to order some.

    I just price the bulk 10 speed stuff and $9 a foot. Granted it is easier
    all one length but much more money than 3 KMC chains. I can get those
    chains at Amazon for $22 a chain. Way cheaper in fact, if it was closer
    I would just due to the hassell factor.

    $22 per chain is a good price for 10 speed. I use 9 speed.

    --
    C'est bon
    Soloman
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mark J cleary@mcleary08@comcast.net to rec.bicycles.tech on Sun Oct 11 16:23:47 2026
    From Newsgroup: rec.bicycles.tech

    On 10/10/2026 11:47 AM, AMuzi wrote:
    On 10/10/2026 10:41 AM, Mark J cleary wrote:
    I went to do some checking on the shifting and clearly my chain was
    shot. I got 3 KMC 10 spd 116 link chains. I layed them out against old
    one and it was actully about 3 links short. I thought oh damn I need
    to buy 4 chains, but frankly thought I had room for fudge factor.

    I used all three together with quick link. Those quick links are ok
    but can be tricky to get set and pop. I then threaded the chain
    through the system. I made 2 errors. I got in a hurry and missed going
    under the chain stay and went over. Stupid me. Then I missed getting
    it around the derailleur properly. Stupid me. Finally I managed.

    Guess what the chain was too short. Crap had not planned that in the
    least. Well my Catrike was a demo so came with extra chain gobbler.
    This give you more room to adjust the boom for various different
    cycling inseam measurements. On a demo you need to have all the
    customers be able to ride it so they install it.

    Well I really had no need for it actually since I am only one riding
    it. I really was planning on keeping it on just because did not seem
    to make much difference. Well I then simply took the Chain Gobbler off
    and then the chain was perfect in measurement. It did make things even
    better for shifting and way less monkey business. Quieter I was a
    happy triker this morning for the 42 mile ride.

    Funny thing is I use AI to see what it recommended on the Chain
    Gobbler and it actually suggested that taking it off it might not
    shift as well, and no more real drag entering the drive train.

    Let me tell you AI is full of garbage. Granted it did not hurt
    anything as such but clearly did not help if you never needed the
    crazy thing to begin with.

    There are now XL chains (140 links) for use with 'pedal forward',
    electrics and cargo bikes. Usually same price. That would keep you at 3 chains not four.


    Today it a 43 mile ride was nice really. No wind and about 51 degress so
    ok. I was tired today though not a lot of gas. When I got home decide to
    check the drive train and new chain. I check the rear derailleur limits
    and actually need to increase the high limit just a smidge. It would not always drop right in to 11 cog. Then I check the L limit and it was fine
    I could not get it to throw off the large cog.

    But I did notice the chain seem a bit to long in the high gear and small front. I ended up removing 2 full lengths of the chain to get it ok. It
    goes easily in the Big Big now and in the small small it actually could
    use a bit more tension but nothing out of real spec. I added tension to
    the B screw but it pretty much all the way in.

    So my question now is after yesterdays ride could something have changed
    to account for 2 lengths as the new chain bedded into the drive train. Yesterday I thought I had it pretty darn good. This surprised me and
    while is is not a problem just wondering?
    --
    Deacon Mark
    --- Synchronet 3.22a-Linux NewsLink 1.2