• new wheels/tires review

    From zen cycle@funkmasterxx@hotmail.com to rec.bicycles.tech on Sat Oct 10 07:51:56 2026
    From Newsgroup: rec.bicycles.tech

    I bought new wheels and tires for my commuter at the beginning of the
    year. Mavic had the Ksyrium SL on sale for $600/set

    https://www.mavic.com/en-us/p/ksyrium-sl-rr1223?variant=190

    and I fitted them with Conti GP 5000 30mm and Conti TPU tubes.

    First off, these are by far the best wheels for the money I've ever
    paid. Even at the full retail of $950 they would have been the best.
    Light, smooth, stiff yet compliant. The freehub is quiter too, and with
    a slight improment in engagement. These wheels check all the boxes. If
    you're shopping for a great set of wheels at a reasonable price, look no further.

    When I first tried out the wheelset, I mounted the set of Conti GP 5000
    25mm I had on the old wheels because the 30mm were still a week out.
    When I mounted the 30s, the difference was quite noticeable. Not
    striking, but There was a distinct difference.

    Since the commuting season is now over for me (I don't ride in the dark)
    I feel safe in reporting the most remarkable part of my commuting nearly
    2000 miles over the past 6 months:

    _no_ flats.

    I've been doing this commute for 11 years now since I've had this job, I typically have a few flats each year. It's rare that I don't have at
    least one per month, and one season I remember I had 12 over the season (including two in one ride https://www.strava.com/activities/1204905449)

    I'd like to think riding a wider tire at lower pressure is the main
    factor, and maybe the TPU tubes helped. With all the road construction
    and lack of maintenance in my area, it certainly isn't a case of the
    roads being better. So, until some one/thing convinces me otherwise, I'm
    gonna stick with this setup for a while.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Sat Oct 10 20:25:16 2026
    From Newsgroup: rec.bicycles.tech

    On Sat Oct 10 07:51:56 2026 zen cycle wrote:
    I bought new wheels and tires for my commuter at the beginning of the
    year. Mavic had the Ksyrium SL on sale for $600/set

    https://www.mavic.com/en-us/p/ksyrium-sl-rr1223?variant=3d190

    and I fitted them with Conti GP 5000 30mm and Conti TPU tubes.

    First off, these are by far the best wheels for the money I've ever
    paid. Even at the full retail of $950 they would have been the best.
    Light, smooth, stiff yet compliant. The freehub is quiter too, and with
    a slight improment in engagement. These wheels check all the boxes. If
    you're shopping for a great set of wheels at a reasonable price, look no further.

    When I first tried out the wheelset, I mounted the set of Conti GP 5000
    25mm I had on the old wheels because the 30mm were still a week out.
    When I mounted the 30s, the difference was quite noticeable. Not
    striking, but There was a distinct difference.

    Since the commuting season is now over for me (I don't ride in the dark)
    I feel safe in reporting the most remarkable part of my commuting nearly
    2000 miles over the past 6 months:

    _no_ flats.

    I've been doing this commute for 11 years now since I've had this job, I typically have a few flats each year. It's rare that I don't have at
    least one per month, and one season I remember I had 12 over the season (including two in one ride https://www.strava.com/activities/1204905449)

    I'd like to think riding a wider tire at lower pressure is the main
    factor, and maybe the TPU tubes helped. With all the road construction
    and lack of maintenance in my area, it certainly isn't a case of the
    roads being better. So, until some one/thing convinces me otherwise, I'm gonna stick with this setup for a while.
    I've notice that even 30 mm tires are significantly less flat prone than 28's. And I ride 28's most of the time. All the trouble I was having with flats wasn't the tires but the inner Presta connector too loose. Tightened that up and havn't had a flat since.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Sat Oct 10 21:30:53 2026
    From Newsgroup: rec.bicycles.tech

    zen cycle <funkmasterxx@hotmail.com> wrote:
    I bought new wheels and tires for my commuter at the beginning of the
    year. Mavic had the Ksyrium SL on sale for $600/set

    https://www.mavic.com/en-us/p/ksyrium-sl-rr1223?variant=190

    and I fitted them with Conti GP 5000 30mm and Conti TPU tubes.

    First off, these are by far the best wheels for the money I've ever
    paid. Even at the full retail of $950 they would have been the best.
    Light, smooth, stiff yet compliant. The freehub is quiter too, and with
    a slight improment in engagement. These wheels check all the boxes. If you're shopping for a great set of wheels at a reasonable price, look no further.

    When I first tried out the wheelset, I mounted the set of Conti GP 5000
    25mm I had on the old wheels because the 30mm were still a week out.
    When I mounted the 30s, the difference was quite noticeable. Not
    striking, but There was a distinct difference.

    Since the commuting season is now over for me (I don't ride in the dark)
    I feel safe in reporting the most remarkable part of my commuting nearly 2000 miles over the past 6 months:

    _no_ flats.

    I've been doing this commute for 11 years now since I've had this job, I typically have a few flats each year. It's rare that I don't have at
    least one per month, and one season I remember I had 12 over the season (including two in one ride https://www.strava.com/activities/1204905449)

    I'd like to think riding a wider tire at lower pressure is the main
    factor, and maybe the TPU tubes helped. With all the road construction
    and lack of maintenance in my area, it certainly isn't a case of the
    roads being better. So, until some one/thing convinces me otherwise, I'm gonna stick with this setup for a while.


    Kinda surprised how many you said you had! I used to get one maybe a year
    with a mix of commuting and road rides. My now commute has one useful
    underpass but often does have some glass so tyres than can cope with that
    are realistically needed.

    Ie I run One pluse which are effectively immune to such glass.

    Roger Merriman

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From NFN Smith@worldoff9908@gmail.com to rec.bicycles.tech on Sat Oct 10 15:03:07 2026
    From Newsgroup: rec.bicycles.tech

    zen cycle wrote:
    I'd like to think riding a wider tire at lower pressure is the main
    factor, and maybe the TPU tubes helped. With all the road construction
    and lack of maintenance in my area, it certainly isn't a case of the
    roads being better. So, until some one/thing convinces me otherwise, I'm gonna-astick-awith-athis-asetup-afor-aa-awhile.

    Definitely possible, but some could also be the tire itself.

    Earlier this year, I went to Continental Gatorskin hard shells, and I've
    had zero flats since then.

    Historically, I've generally ridden 23s, and for this set, I went to 25.
    I've also been more careful about not over-inflating. Some of the
    problems I had with flats a couple of years ago was going all the way to
    120 PSI on 23s, but where the pressure meter on the pump wasn't super-accurate, because the hose may have been leaking just a little
    air. Yet another thing that doesn't do well in dry air (tires and tubes, weather stripping, belts and hoses on my car, inkjet printer cartridges,
    etc.) As a result I was probably over-filling my tubes.

    Since I moved to 25s, I'm careful not to do much above 85 (and where the sidewall of the tire notes 90 PSI as recommended max).

    I think spacing on this frame is narrow enough that it can't 28s, much
    less 30 or something larger.

    I've always had a preference for narrower and higher pressure, with the expectation of lowest rolling resistance, but slowly, I'm coming around
    to wider and lower pressure.

    As for my tubes, I'm not using anything special, just whatever is
    available from one of two or three LBS, and with around 1000 miles, I
    haven't had any issues with this setup.

    One thing that I used to do years ago was to make use of the Mr Tuffy
    Kevlar inserts, and those definitely helped to defend against thorns and goatsheads. I haven't seen those recently (although probably available
    on Amazon), nor for that matter, tires that are built with Kevlar built
    into the tire itself. For me, as long as the tires don't wear out from
    use or breakdown from arid conditions, I think I'm likely to be mostly
    good on flat resistance.

    Now that I think of it, when I was out with my son this morning, he
    flatted about a mile from home, and that's the second time that he's had issues with flats in that tire in less than a month. I suspect
    goatsheads to be the culprit, but it may be that there's enough mileage
    in that tire (on the rear) that it may be worth replacing, or at least rotating to the front.

    Smith
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From zen cycle@funkmasterxx@hotmail.com to rec.bicycles.tech on Sat Oct 10 21:10:48 2026
    From Newsgroup: rec.bicycles.tech

    On 10/10/2026 6:03 PM, NFN Smith wrote:
    zen cycle wrote:
    I'd like to think riding a wider tire at lower pressure is the main
    factor, and maybe the TPU tubes helped. With all the road construction
    and lack of maintenance in my area, it certainly isn't a case of the
    roads being better. So, until some one/thing convinces me otherwise,
    I'm gonna-astick-awith-athis-asetup-afor-aa-awhile.

    Definitely possible, but some could also be the tire itself.

    Earlier this year, I went to Continental Gatorskin hard shells, and I've
    had zero flats since then.

    There are several big differences between a gatorskin hardshell and a
    BP5000, one of which is the tread thickness - the gatorskins hardshells
    are a full mm thicker at the 'tread' center than a GP 5000.


    Historically, I've generally ridden 23s, and for this set, I went to 25. I've also been more careful about not over-inflating. Some of the
    problems I had with flats a couple of years ago was going all the way to
    120 PSI on 23s, but where the pressure meter on the pump wasn't super- accurate, because the hose may have been leaking just a little air. Yet another thing that doesn't do well in dry air (tires and tubes, weather stripping, belts and hoses on my car, inkjet printer cartridges, etc.)
    As a result I was probably over-filling my tubes.

    Since I moved to 25s, I'm careful not to do much above 85 (and where the sidewall of the tire notes 90 PSI as recommended max).

    I think spacing on this frame is narrow enough that it can't 28s, much
    less 30 or something larger.

    I've always had a preference for narrower and higher pressure, with the expectation of lowest rolling resistance, but slowly, I'm coming around
    to wider and lower pressure.

    As for my tubes, I'm not using anything special, just whatever is
    available from one of two or three LBS, and with around 1000 miles, I haven't had any issues with this setup.

    One thing that I used to do years ago was to make use of the Mr Tuffy
    Kevlar inserts, and those definitely helped to defend against thorns and goatsheads. I haven't seen those recently (although probably available
    on Amazon), nor for that matter, tires that are built with Kevlar built
    into the tire itself.-a For me, as long as the tires don't wear out from
    use or breakdown from arid conditions, I think I'm likely to be mostly
    good on flat resistance.

    Now that I think of it, when I was out with my son this morning, he
    flatted about a mile from home, and that's the second time that he's had issues with flats in that tire in less than a month. I suspect
    goatsheads to be the culprit, but it may be that there's enough mileage
    in that tire (on the rear) that it may be worth replacing, or at least rotating to the front.

    Smith

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From NFN Smith@worldoff9908@gmail.com to rec.bicycles.tech on Mon Oct 12 10:28:02 2026
    From Newsgroup: rec.bicycles.tech

    zen cycle wrote:
    Earlier this year, I went to Continental Gatorskin hard shells, and
    I've had-azero-aflats-asince-athen.

    There are several big differences between a gatorskin hardshell and a BP5000, one of which is the tread thickness - the gatorskins hardshells are-aa-afull-amm-athicker-aat-athe-a'tread'-acenter-athan-aa-aGP-a5000.

    True, and I didn't mean to imply that they weren't different, just
    noting my own experience.

    As it is, for the set that I replaced, one of the the tires I took off
    was a different Continental Gatorskin (not hardshell, but I don't see
    the model name on the sidewall). That one is still in good enough shape
    that later in the year, when I start doing some mileage on an indoor
    trainer, I'll put that on the rear, so that I don't wear down the
    hardshell until I get back outside again.

    Smith
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Roger Merriman@roger@sarlet.com to rec.bicycles.tech on Mon Oct 12 19:15:38 2026
    From Newsgroup: rec.bicycles.tech

    NFN Smith <worldoff9908@gmail.com> wrote:
    zen cycle wrote:
    Earlier this year, I went to Continental Gatorskin hard shells, and
    I've had-azero-aflats-asince-athen.

    There are several big differences between a gatorskin hardshell and a
    BP5000, one of which is the tread thickness - the gatorskins hardshells
    are-aa-afull-amm-athicker-aat-athe-a'tread'-acenter-athan-aa-aGP-a5000.

    True, and I didn't mean to imply that they weren't different, just
    noting my own experience.

    As it is, for the set that I replaced, one of the the tires I took off
    was a different Continental Gatorskin (not hardshell, but I don't see
    the model name on the sidewall). That one is still in good enough shape that later in the year, when I start doing some mileage on an indoor trainer, I'll put that on the rear, so that I don't wear down the
    hardshell until I get back outside again.

    Smith

    They certainly are popular for high mileage commuters ie light enough but durable and resistant to punctures, with for london their one downside
    being there wet weather grip, which is almost certainly also why they last
    so long!

    IrCOm not in touch as much with folks who commute into central anymore so not sure if those sort of riders still go for gator skins or 4 Seasons or armadillos or with the ability to work from home, and choose to avoid
    really wet days, just do what Zen does and go for GP5000 certainly the
    folks I do know now donrCOt (unlike myself) have a dedicated commuter bike
    but just cope with their road or gravel bike as they can choose the
    day/time more than in the past.

    I do run a commuter road bike which is set up for that, as I canrCOt work
    from home, generally and as IrCOm going outer to outer London other transport options are less good, as itrCOs set up outer to inner.

    Plus I do pass though one if short section that is high risk for glass etc,
    so having tyres than can just cope with that seems wise!

    Roger Merriman

    --- Synchronet 3.22a-Linux NewsLink 1.2