• Re: Pushin BB

    From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Fri Oct 2 12:01:16 2026
    From Newsgroup: rec.bicycles.tech

    On 10/2/2026 11:24 AM, cyclintom wrote:
    Does anyone know if the -press fit bearings all have the same OD?

    No, they do not. The prime motive for different (larger)
    press formats is to use larger (longer lasting) bearings.

    Jump down to 'Press Fit" here, just after T47: https://www.firstcomponents.com/bottom-bracket-standards/
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Y3ljbGludG9t?=@cyclintom@yahoo.com to rec.bicycles.tech on Sat Oct 3 21:38:50 2026
    From Newsgroup: rec.bicycles.tech

    On Fri Oct 2 12:01:16 2026 AMuzi wrote:
    On 10/2/2026 11:24 AM, cyclintom wrote:
    Does anyone know if the -press fit bearings all have the same OD?

    No, they do not. The prime motive for different (larger)
    press formats is to use larger (longer lasting) bearings.

    Jump down to 'Press Fit" here, just after T47: https://www.firstcomponents.com/bottom-bracket-standards/
    I looked it up and indeed there is a BB30 with an OD of 41 mm in the hole and a PF30 which is 46 mm. So of course, I had ordered the incorrect one. FSA is pretty reliable both for Cranks and bottom brackets. PF30 is a SRAM standard and it is probably superior mechanically, but I have a 41 mm hole.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.bicycles.tech on Sun Oct 4 09:06:12 2026
    From Newsgroup: rec.bicycles.tech

    On 10/3/2026 4:38 PM, cyclintom wrote:
    On Fri Oct 2 12:01:16 2026 AMuzi wrote:
    On 10/2/2026 11:24 AM, cyclintom wrote:
    Does anyone know if the -press fit bearings all have the same OD?

    No, they do not. The prime motive for different (larger)
    press formats is to use larger (longer lasting) bearings.

    Jump down to 'Press Fit" here, just after T47:
    https://www.firstcomponents.com/bottom-bracket-standards/




    I looked it up and indeed there is a BB30 with an OD of 41 mm in the hole and a PF30 which is 46 mm. So of course, I had ordered the incorrect one. FSA is pretty reliable both for Cranks and bottom brackets. PF30 is a SRAM standard and it is probably superior mechanically, but I have a 41 mm hole.

    "Press in" is not a standard. It's a panoply of various
    formats which do not have threads. See link above.
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2