• 1966 Chevelle turn signal question

    From AMuzi@am@yellowjersey.org to rec.autos.tech on Sun Nov 8 13:02:12 2026
    From Newsgroup: rec.autos.tech

    The outside collar and directional mechanism rotates when I
    shift (4 speed standard shift).

    https://www.yellowjersey.org/cars/mal2611a.jpg https://www.yellowjersey.org/cars/mal2611b.jpg

    Had it apart, and that collar engages tangs on the outer
    column, as described in manual, but doesn't lock in place.
    Upper bearing is worn. but not broken; I flushed it and
    filled with fresh Lubriplate. (upper bearing is backordered).

    Besides looking odd, can't move the signal lever when it's
    at 11:00 rather than 9:00.

    Any suggestions? I have the GM manual, which is not at all
    clear on this point.

    Section 9-19, Assembly, paragraph 11:
    "Position directional signal housing onto mast jacket being
    sure slots in housing engage with tangs of mast jacket
    correctly*, then turn housing clockwise against the stops."

    *There is only one position in which the slot for the signal
    lever is anywhere near 9:00.

    Although installation was exactly as described, "turn
    housing clockwise against the stops", there is nothing to
    keep it from turning back the other way when shifting.

    On my other cars, neither the signal lever nor shifter move
    the outer steel cover.

    I've had many 1965/1966 Chevrolets but this is a new problem
    to me. Any suggestions?
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From AMuzi@am@yellowjersey.org to rec.autos.tech on Sun Nov 8 13:07:43 2026
    From Newsgroup: rec.autos.tech

    On 11/8/2026 1:02 PM, AMuzi wrote:
    The outside collar and directional mechanism rotates when I
    shift (4 speed standard shift).

    https://www.yellowjersey.org/cars/mal2611a.jpg https://www.yellowjersey.org/cars/mal2611b.jpg

    Had it apart, and that collar engages tangs on the outer
    column, as described in manual, but doesn't lock in place.
    Upper bearing is worn. but not broken; I flushed it and
    filled with fresh Lubriplate. (upper bearing is backordered).

    Besides looking odd, can't move the signal lever when it's
    at 11:00 rather than 9:00.

    Any suggestions? I have the GM manual, which is not at all
    clear on this point.

    Section 9-19, Assembly, paragraph 11:
    "Position directional signal housing onto mast jacket being
    sure slots in housing engage with tangs of mast jacket
    correctly*, then turn housing clockwise against the stops."

    *There is only one position in which the slot for the signal
    lever is anywhere near 9:00.

    Although installation was exactly as described, "turn
    housing clockwise against the stops", there is nothing to
    keep it from turning back the other way when shifting.

    On my other cars, neither the signal lever nor shifter move
    the outer steel cover.

    I've had many 1965/1966 Chevrolets but this is a new problem
    to me. Any suggestions?


    Sorry; typo, dammit. It's a standard 3 speed.
    --
    Andrew Muzi
    am@yellowjersey.org
    Open every day since 1 April, 1971
    --- Synchronet 3.22a-Linux NewsLink 1.2