This has probably been asked-and-answered before, but:I have to wonder if you can buy these components from someplace that fabricates paper tubes and paper disks. When you manufacture things in
I am looking for multi-section "empties" - that would be the can and the phenolic wafer - so I can stuff them myself without the cutting-and-gutting otherwise necessary.
Anyone aware of a source?
Thanks in advance!
The problem with cardboard in close quarters with vacuum tube equipment is the heat. The multi-section cap in my Dynaco ST35 is less than two inches from the output tubes, which run at 240F +/-. For just one example. Not that there is any danger of fire - but it is quite warm. I also want the metal can look. I have found sources, even at reasonable costs - at quantities of 500 or more.
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 76 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 55:38:20 |
| Calls: | 1,265 |
| Calls today: | 1 |
| Files: | 1,362 |
| D/L today: |
3 files (2,684K bytes) |
| Messages: | 285,684 |