1. Forum
  2. USENET
  3. rec.audio.high-end

  • Non-Polarized Panel-Mount Convenience Recptacles

    From Peter Wieck@peterwieck33@gmail.com to rec.audio.high-end on Sun Mar 28 18:17:42 2021
    From Newsgroup: rec.audio.high-end

    https://www.unicornelex.com/Non_Polarized_Chassis_Mount_AC_Power_Receptacle_p/36-3800.htm

    Ladies and gentleman, boys and girls, and children of all ages:

    For those of us with the awful habit of restoring vintage equipment and who often have a hard time finding these, they fit Dynaco and similar devices.

    Peter WIeck
    Melrose Park, PA
    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Peter Wieck@peterwieck33@gmail.com to rec.audio.high-end on Thu Apr 1 04:09:49 2021
    From Newsgroup: rec.audio.high-end

    Update: These fit as-found in a latter day SCA-80Q. I had to file them down a little bit to fit into an SCA-35. Fastener spacing is dead-on, and there is plenty of clearance inside in both cases.

    Peter Wieck
    Melrose Park, PA
    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Trevor Wilson@trevor@rageaudio.com.au to rec.audio.high-end on Wed Apr 7 19:40:49 2021
    From Newsgroup: rec.audio.high-end

    [Arrived late to the moderator due to mail hijinks. - dsr]
    [original date: Fri, 2 Apr 2021 06:37:49 +1100 ]

    On 1/04/2021 10:09 pm, Peter Wieck wrote:
    Update: These fit as-found in a latter day SCA-80Q. I had to file them down a little bit to fit into an SCA-35. Fastener spacing is dead-on, and there is plenty of clearance inside in both cases.


    **SNAP! I have an ancient SCA-80Q on the bench right now.
    --
    This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Peter Wieck@peterwieck33@gmail.com to rec.audio.high-end on Fri Apr 9 03:50:20 2021
    From Newsgroup: rec.audio.high-end


    **SNAP! I have an ancient SCA-80Q on the bench right now.

    You may need to file them a bit in that case. My unit is a "Blackwood", you likely have a "Jefferson". It took me less than five (5) minutes to file both for the SCA-35.

    Peter Wieck
    Melrose Park, PA

    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From Peter Wieck@peterwieck33@gmail.com to rec.audio.high-end on Fri Apr 16 04:52:53 2021
    From Newsgroup: rec.audio.high-end

    Just struck me - be sure to do the TIP-Mod on that device before releasing it back into polite society. Most especially applicable to Jefferson Street models (19121 zip-code). And replace the 2N3055 output transistors with 2N3772 devices, matched if you can. It will be a very different amp thereafter.
    https://www.updatemydynaco.com/documents/TIPmod.pdf
    You will note that the 80 driver board is electronically identical to the 120 driver board as far as the TIP-mod is concerned. Just a lot less space.
    Peter Wieck
    Melrose Park, PA
    --- Synchronet 3.21d-Linux NewsLink 1.2