• [dialog] Clear clutter in the ALL tab without wiping out everything

    From Cromwell@cromwell@cromwell.com to news.software.readers on Thu Sep 10 22:47:04 2026
    From Newsgroup: news.software.readers

    Is there a way to just clear all the old clutter in the Dialog ALL tab?

    My 40TudeDialog has been in use for almost 25 years, so there are a lot of stale now-deprecated usenet servers in the "All" tab such as some of these

    news.software.readers (aioe) 2311
    news.software.readers (albisani) 870
    news.software.readers (bbs.nz) 9371
    news.software.readers (blueworld) 6324
    news.software.readers (bofh) 132814
    news.software.readers (chmurka) 98320
    news.software.readers (csiph) 18932
    news.software.readers (dizum) 8732
    news.software.readers (endoftheline) 2835
    news.software.readers (eternalsept) 21235
    news.software.readers (freedyne) 9762
    news.software.readers (gmane.org) 5904
    news.software.readers (hispagatos) 487302
    news.software.readers (mixmin) 200218
    news.software.readers (mozilla.org) 1765
    news.software.readers (neodome) 98382
    news.software.readers (netfront) 923
    news.software.readers (news4all) 2234
    news.software.readers (novabbs) 63248
    news.software.readers (pugleaf) 29238
    news.software.readers (samolyk) 29019
    news.software.readers (solani) 9022
    news.software.readers (sunsite) 3324
    news.software.readers (tcpreset) 19324
    news.software.readers (usenet.ovh) 598340
    news.software.readers (xsusenet) 4614
    news.software.readers (xsusenet) 11944

    When I rightclick in that graphical interface, I can purge individual
    groups, but there are many thousands of them for each news server.

    Is there an easy way in 40Tude Dialog to purge all the groups, but to keep
    the server intact in the Settings > Servers > Newsservers > Available GUI?

    I don't want to remove the credentials (since I can't get them back easily)
    but I do want to clear out all the groups, but there are tens of thousands.

    Deleting server eternalsept will delete 43219 groups (5 subscribed groups)
    with up to 21235 articles. Even articles with the keep flag will be
    deleted. Do you really want to delete this server?

    I don't want to do that. I just want to clear the clutter in the ALL tab.
    Is there a way to just clear all the old clutter in the Dialog ALL tab?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From ram@ram@zedat.fu-berlin.de (Stefan Ram) to news.software.readers on Fri Sep 11 08:46:26 2026
    From Newsgroup: news.software.readers

    Cromwell <cromwell@cromwell.com> wrote or quoted:
    I just want to clear the clutter in the ALL tab.

    The 40tude Dialog Help says,

    |First note, that you can rearrange the list of groups,
    |folders and separators on the Subscribed tab only. The list
    |is always alphabetically sorted on the All, New, Folders and
    |Filtered tab.
    How can I ... (Procedural Help)/... rearrange the newsgroup list.

    However, it also says,

    |Scripting is a very powerful feature that lets you extend
    |Dialog and change the way Dialog works.
    Reference/Scripting.


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From ram@ram@zedat.fu-berlin.de (Stefan Ram) to news.software.readers on Fri Sep 11 13:46:15 2026
    From Newsgroup: news.software.readers

    ram@zedat.fu-berlin.de (Stefan Ram) schrieb oder zitierte:
    |Scripting is a very powerful feature that lets you extend
    |Dialog and change the way Dialog works.
    Reference/Scripting.

    Seems not to be easy to write such a script!

    You can use the "Filtered" tab, select "reg. exp." and then
    write a reg. exp. for the names of the servers you /do/ want
    to see in the contents field.


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bernd Rose@b.rose.tmpbox@arcor.de to news.software.readers on Fri Sep 11 19:20:40 2026
    From Newsgroup: news.software.readers

    Am Thu, 10 Sep 2026 22:47:04 -0700, schrieb Cromwell:

    Is there a way to just clear all the old clutter in the Dialog ALL tab?

    Purging the *content* of groups can be done by selecting them on any tab
    and executing the command <Group><Clear Group> (also on right mouse menu).
    You can use the [Filtered] tab to do this "by server".

    Removing groups from the [All] tab while keeping the server listed is not provided by the GUI, because this tab is *meant* to carry _any_ group from _each_ subscribed server.

    Is there an easy way in 40Tude Dialog to purge all the groups, but to keep the server intact in the Settings > Servers > Newsservers > Available GUI?

    I don't want to remove the credentials (since I can't get them back easily)

    If you just don't know the passwords, anymore, you can retrieve them with NirSoft BulletsPassView (www.nirsoft.net/utils/bullets_password_view.html).
    You need the 32 bit version (even on x64 systems), because the *target*
    program (40tude Dialog) is 32 bit.

    Be aware, that most AV programs block BulletsPassView as "unwanted" tool. Therefore, you need to permit an exception.

    For BulletsPassView revealing a passwords, the bullets need to be visible. Refresh the tool for any server setting entry in 40tude Dialog.

    After you copied all server settings, user names and passwords into the password safe of your choice, you can remove the servers from Dialog.

    Bernd
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Fri Sep 11 14:42:38 2026
    From Newsgroup: news.software.readers

    On Fri, 11 Sep 2026 19:20:40 +0200, Bernd Rose wrote:
    Is there a way to just clear all the old clutter in the Dialog ALL tab?

    Purging the *content* of groups can be done by selecting them on any tab
    and executing the command <Group><Clear Group> (also on right mouse menu). You can use the [Filtered] tab to do this "by server".

    Removing groups from the [All] tab while keeping the server listed is not provided by the GUI, because this tab is *meant* to carry _any_ group from _each_ subscribed server.

    Is there an easy way in 40Tude Dialog to purge all the groups, but to keep >> the server intact in the Settings > Servers > Newsservers > Available GUI? >>
    I don't want to remove the credentials (since I can't get them back easily)

    If you just don't know the passwords, anymore, you can retrieve them with NirSoft BulletsPassView (www.nirsoft.net/utils/bullets_password_view.html). You need the 32 bit version (even on x64 systems), because the *target* program (40tude Dialog) is 32 bit.

    Be aware, that most AV programs block BulletsPassView as "unwanted" tool. Therefore, you need to permit an exception.

    For BulletsPassView revealing a passwords, the bullets need to be visible. Refresh the tool for any server setting entry in 40tude Dialog.

    After you copied all server settings, user names and passwords into the password safe of your choice, you can remove the servers from Dialog.

    Thank you Bernd Rose and Stefan Ram for your advice since what I 'exactly'
    want isn't in the GUI, but you are correct that my biggest worry about just wiping out the entire server (and everything associated with it) is the password.

    It's too bad there isn't a text file of some sort that is in the GUI to add comments about any given news server, since that's where I'd save the
    original password emails if I could.

    Thanks. I'll try out the NirSoft BulletsPassView software you suggested.

    https://www.nirsoft.net/utils/bullets_password_view.html
    BulletsPassView v1.32 is a password recovery tool that reveals the
    passwords stored behind the bullets in the standard password text-box of Windows operating system and Internet Explorer Web browser. After revealing
    the passwords, you can easily copy them to the clipboard or save them into text/html/csv/xml file.

    Oh no! I see what you mean!

    https://www.nirsoft.net/utils/bulletspassview.zip
    Edge "Couldn't download - Virus detected" (no override is offered)
    Chrome "Something went wrong" (no override is offered)

    https://www.nirsoft.net/false_positive_report.html https://www.nirsoft.net/faq.html

    curl.exe -L "https://www.nirsoft.net/utils/bulletspassview.zip" -o bulletspassview.zip
    It worked. Then it didn't. Because Windows Defender deleted it in seconds.

    Get-MpThreat | Format-List ThreatName,SeverityID,CategoryID,Resources
    Windows thinks it is a "HackTool:Win32/Passview!MSR"
    That's Microsoft's detection for NirSoft's password-recovery tools.
    So Defender isn't identifying it as a conventional virus.
    It's classifying it as a hack/password-recovery tool.

    I finally got it but I'll write up how separately for the group reference because I had to exclude the specific directory that I saved the file into.

    Name: bulletspassview.zip
    Size: 60783 bytes (59 KiB)
    SHA256: D5C801DA275540C1713102518E67ED94A1AFECBAE2418D5B9F94148E338F61E5

    tar -tf .\bulletspassview.zip
    BulletsPassView.exe
    BulletsPassView.chm
    readme.txt

    dir
    -a---- 9/11/2026 1:23 PM 22676 bulletspassview.txt
    -a---- 9/11/2026 1:30 PM 60783 bulletspassview.zip
    -a---- 9/11/2026 1:32 PM 71776 BulletsPassView.exe
    -a---- 9/11/2026 1:32 PM 26944 BulletsPassView.chm
    -a---- 9/11/2026 1:32 PM 7302 readme.txt

    I can do it, but it's much harder than I had thought it will be
    for the average person (who doesn't know powershell) to do it.

    I'll write it up separately, as I need to reproduce the steps in
    a simpler directory tree and I have to test it in Dialog too.

    But I am sure I'll get it working, so thanks for all your help! .
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bernd Rose@b.rose.tmpbox@arcor.de to news.software.readers on Fri Sep 11 22:18:01 2026
    From Newsgroup: news.software.readers

    On Fri, 11th Sep 2026 14:42:38 -0500, Cromwell wrote:

    [Settings]
    It's too bad there isn't a text file of some sort that is in the GUI to add comments about any given news server, since that's where I'd save the original password emails if I could.

    Create a text file in rudimentary *.mbx format and import it to any folder
    you like. (Afterwards, you can also move it to any Newsgroup.) For example:

    -------------------------------
    From: Usenet
    Subject: Server-Info

    Server <...>:
    =============
    Host: ...
    Port: ...
    Username: ...
    Password: ...

    Server <...>:
    =============
    Host: ...
    Port: ...
    Username: ...
    Password: ...

    Server <...>:
    =============
    Host: ...
    Port: ...
    Username: ...
    Password: ...
    -------------------------------

    Bernd
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Fri Sep 11 16:05:44 2026
    From Newsgroup: news.software.readers

    On Fri, 11 Sep 2026 22:18:01 +0200, Bernd Rose wrote:
    It's too bad there isn't a text file of some sort that is in the GUI to add >> comments about any given news server, since that's where I'd save the
    original password emails if I could.

    Create a text file in rudimentary *.mbx format and import it to any folder you like. (Afterwards, you can also move it to any Newsgroup.) For example:

    -------------------------------
    From: Usenet
    Subject: Server-Info

    Server <...>:
    =============
    Host: ...
    Port: ...
    Username: ...
    Password: ...

    Server <...>:
    =============
    Host: ...
    Port: ...
    Username: ...
    Password: ...

    Server <...>:
    =============
    Host: ...
    Port: ...
    Username: ...
    Password: ...
    -------------------------------

    I like the idea.
    Is this the flow you had envisioned?

    I would have put the mbx text file with other mbx files in the dialog
    folder, but I looked for mbx files in the dialog directory, but there are
    none.

    find . -type f -iname '*.mbx'

    So I created a placeholder password file using the structure you suggested. gvim "C:\Program Files\dialog\passwd.mbx"

    I created a folder called 'passwd' although maybe some other folder is
    better out of the millions of folders that are in that Folder tab. 40tudeDialog:Folders tab -> right click -> New folder -> passwd

    Then I imported the mbx text file into that newly created passwd folder. 40tudeDialog: File -> Import messages -> passwd.mbx
    Import from file: "C:\Program Files\dialog\passwd.mbx"
    Import into folder: passwd
    Use X-Folder header if available {this option is checked by default}
    Analyse XRef header {this option is checked by default}
    Imported messages are all emails (ignore "Newsgroups" header fields)
    {this last option is not checked by default}

    Added 1 article to passwd.

    Now in the 40Tude Dialog "Folders" tab, is one article with odd headers.
    Date: 1/1/1980 12:00:00 AM
    Subject: ()

    Then it's OK to delete passwd.mbx as it's no longer needed.
    Is this kind of the flow you were suggesting for attaching the password
    files to any given server (where I could have used any of the Inbox
    folders)?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bernd Rose@b.rose.tmpbox@arcor.de to news.software.readers on Sat Sep 12 00:48:50 2026
    From Newsgroup: news.software.readers

    On Fri, 11th Sep 2026 16:05:44 -0500, Cromwell wrote:

    Added 1 article to passwd.

    Now in the 40Tude Dialog "Folders" tab, is one article with odd headers.
    Date: 1/1/1980 12:00:00 AM
    Subject: ()

    If you followed my suggestion you should see:

    Subject: Server-Info (Usenet)

    Maybe, you omitted the empty line dividing Headers and Body? And add two
    empty lines at the end as end-of-message marker.

    If you want the current date, add an appropriate header. Best to export
    a simple mail or Usenet message to *.mbx as an example and/or template.

    The Import dialog settings should be self-explanatory. Else hit F1 to
    fire up the context help topic.

    Bernd
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Fri Sep 11 17:51:04 2026
    From Newsgroup: news.software.readers

    On 11 Sep 2026 13:46:15 GMT, Stefan Ram wrote:
    ram@zedat.fu-berlin.de (Stefan Ram) schrieb oder zitierte:
    |Scripting is a very powerful feature that lets you extend
    |Dialog and change the way Dialog works.
    Reference/Scripting.

    Seems not to be easy to write such a script!

    You can use the "Filtered" tab, select "reg. exp." and then
    write a reg. exp. for the names of the servers you /do/ want
    to see in the contents field.

    Thank you for that useful advice where I followed Bernd's advice.
    which solved the problem another way, so I didn't need to script it.

    I used the https://www.nirsoft.net/utils/bulletspassview.zip file.
    But it wasn't easy to get that file to stay on the Windows filesys.
    Windows Defender thinks it's a "HackTool:Win32/Passview!MSR" virus.

    First I checked if I had any Windows Defender exclusion directories. Get-MpPreference | Select-Object ExclusionPath,ExclusionProcess
    And luckily, there were none.

    Then I created a temporary exclusion for the downloads directory. Set-MpPreference -ExclusionPath "C:\Downloads"
    Which I verified with this powershell command.
    Get-MpPreference | Select-Object -ExpandProperty ExclusionPath

    Then I was able to download the zip file w/o Windows deleting it.
    curl.exe -L "https://www.nirsoft.net/utils/bulletspassview.zip" -o bulletspassview.zip

    I was able to look inside the zip and to extract the executable in the zip.
    tar -tf .\bulletspassview.zip
    BulletsPassView.exe
    BulletsPassView.chm
    readme.txt

    tar -xf .\bulletspassview.zip
    09/11/2026 02:30 PM 60,783 bulletspassview.zip
    09/11/2026 02:32 PM 71,776 BulletsPassView.exe
    09/11/2026 02:32 PM 26,944 BulletsPassView.chm
    09/11/2026 02:32 PM 7,302 readme.txt
    09/11/2026 02:43 PM 19,492 bulletspassview.txt
    09/11/2026 04:25 PM 775 BulletsPassView.cfg

    To recover the passwords, I first brought them up, one by one.
    40tudeDialog: Settings -> Servers -> Newsservers -> {choose one}
    The password is obfuscated by asterisks, of course.

    But that's when I ran the BulletsPassView.exe passwd deobfuscator.
    The BulletsPassView GUI displays the following fields:
    Window Title = Server/Identity settings
    Password = mypassword
    Field Name = blank
    Process Name = dialog.exe
    Process Path = C:\Program Files\dialog\dialog.exe
    Process Description = 40tude Dialog
    Detected On = 9/11/2026 4:56:22 PM

    The F5 key refreshed the BulletsPassView GUI.
    The Ctrl+P copied the password into the Windows clipboard buffer.

    One by one, I recovered all the obfuscated passwords in 40tude Dialog
    and then I added them into a passwd.mbx temporary text file which I
    then imported into a named folder using Dialog File -> Import messages.

    I created using the new folder by right clicking in the 40Tude Dialog
    Folders tab "New folder" menu (the new folder being called "passwd")
    for lack of a better name.

    After I recovered the passwords, and imported them into a folder in
    40Tude Dialog, for safety, I removed the Windows Defender exclusion. Remove-MpPreference -ExclusionPath "C:\Downloads"
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Fri Sep 11 23:23:39 2026
    From Newsgroup: news.software.readers

    On Sat, 12 Sep 2026 00:48:50 +0200, Bernd Rose wrote:
    Now in the 40Tude Dialog "Folders" tab, is one article with odd headers.
    Date: 1/1/1980 12:00:00 AM
    Subject: ()

    If you followed my suggestion you should see:

    Subject: Server-Info (Usenet)

    Maybe, you omitted the empty line dividing Headers and Body? And add two empty lines at the end as end-of-message marker.

    If you want the current date, add an appropriate header. Best to export
    a simple mail or Usenet message to *.mbx as an example and/or template.

    The Import dialog settings should be self-explanatory. Else hit F1 to
    fire up the context help topic.

    Oh. Well. Yeah. I am guilty as charged. I did all that you said I did.
    Not knowing it mattered. But that's OK as I've been working on the mbx.

    I added a few fields. This template should work, I think, for everyone.
    I haven't added all the stunnel.conf fields yet, but here's a rough draft. (This is only an excerpt as many of my news server settings are stale.)

    The goal is this single mbx file should contain everything needed
    to re-create the server setup from scratch, although there are more
    fields to add, so this is just my current working in progress status.


    From: Usenet
    Subject: Server-Info (Usenet)

    Server: aioe [rw]
    Restrictions: read-write, 3 ngs xpost
    Host: nntp.aioe.org
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Paolo Amoroso <estasi@aioe.org>

    Server: mixmin [rw]
    Restrictions: read-only
    Host: localhost
    Port: 11563
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    [Mixmin]
    client = yes
    accept = localhost:11563
    connect = news.mixmin.net:563
    CAfile = ca-certs.pem
    verifyChain = yes
    checkHost = news.mixmin.net
    OCSPaia = yes
    Date: 20260911
    Users Email:
    Admin Email: Steve Crook <newsmaster@mixmin.net>

    Server: albasani [rw]
    Restrictions: read-write
    Host: reader.albasani.net
    Port: 119
    SSL: unchecked
    Username: talbinot@gmail.com
    Password: o2a-5pTH
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email: talbinot@gmail.com
    Admin Email: Roman Racine <roman.racine@gmail.com>

    Server: bofh [rw]
    Restrictions: read-write, no alt groups
    Host: paganini.bofh.team
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Ivo Gandolfo <usenet@bofh.team>

    Server: solani
    Restrictions:
    Host: news.solani.org
    Port: 119
    SSL: unchecked
    Username: Cephio
    Password: 9a4ewvw8
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Benjamin Gufler (usenet@news.solani.org)

    Server: raybananna
    Restrictions:
    Host: 127.0.0.1
    Port: 11199
    SSL: unchecked
    Username: whoami
    Password: 3ewiaesei
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Wolfgang M. Weyand <wolfgang@eternal-september.org>

    Server: dizum [ro]
    Restrictions: read-only
    Host: news.dizum.net
    Port: 119/563
    SSL: unchecked for 119, checked for 563
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Alex de Joode <usura@despair.sabotage.org>

    Server: neodome [ro]
    Restrictions: read-only
    Host: news.neodome.net
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: admin <admin@neodome.net>

    Server: netfront [ro]
    Restrictions: read-only
    Host: freenews.netfront.net
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: admin <news@netfront.net>

    Server: blueworld [rw]
    Restrictions: none
    Host: localhost
    Port: 12564
    SSL: unchecked
    Username: iewsei
    Password: bingoTwesreso+req3
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Jesse Rehmer <jesse.rehmer@gmail.com>

    Server: chmurka
    Restrictions:
    Host: 127.0.0.1
    Port: 11565
    SSL: unchecked
    Username: koziolja
    Username: pappa23a
    Password: YANKEE13
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Adam Wysocki <news-contact@chmurka.net>

    Server: tcpreset [rw]
    Restrictions: read/write
    Host: news.tcpreset.net
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Gabriel <info@tcpreset.net>

    Server: pugleaf [ro]
    Restrictions: read-only
    Host: news-fra.pugleaf.net
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Billy G. <42-contact-42@pugleaf.net>

    Server: csiph [ro]
    Restrictions: read-only
    Host: nntp.csiph.com
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Kevin Bowling <admin@csiph.com>

    Server: bbs.nz [ro]
    Restrictions: read-only
    Host: news.bbs.nz
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Kerr Avon <newsmaster@news.bbs.nz>

    Server: ovh [ro]
    Restrictions: read-only
    Host: news.usenet.ovh
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    Date: 20260911
    Users Email:
    Admin Email: Jean Paul <contact@usenet.ovh>
    --
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bernd Rose@b.rose.tmpbox@arcor.de to news.software.readers on Sat Sep 12 08:15:46 2026
    From Newsgroup: news.software.readers

    On Fri, 11th Sep 2026 23:23:39 -0000 (UTC), Cromwell wrote:

    Oh. Well. Yeah. I am guilty as charged. I did all that you said I did.
    Not knowing it mattered. But that's OK as I've been working on the mbx.

    You can always export -> edit -> reimport to change things. If you want
    to keep backups, I suggest adding a date header and maybe a counter or
    a sort-enabling date (like YYYY-MM-DD format) to the Subject line.

    this is just my current working in progress status.

    From: Usenet
    Subject: Server-Info (Usenet)

    Server: aioe [rw]
    [...]
    Admin Email: Jean Paul <contact@usenet.ovh>

    The "Usenet" specifier does not need to be added to the Subject line in
    the *.mbx file. Dialog displays subjects in the "Subject" column of the ThreadView Pane as "<Subject> (<From>)". - With each <...> referencing
    the field from the *.mbx (resp. the imported message).

    If you didn't just snip the empty last 2 lines (as I accidentally did
    in my second reply), you'll see import corruption on the last line.
    (First character is missing.)

    IIRC, support for more non-standard *.mbx formats was one of the open
    feature requests, that suffered from Marcus abandoning 40tude Dialog.

    Bernd
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Sun Sep 13 06:54:09 2026
    From Newsgroup: news.software.readers

    On Sat, 12 Sep 2026 08:15:46 +0200, Bernd Rose wrote:
    You can always export -> edit -> reimport to change things. If you want
    to keep backups, I suggest adding a date header and maybe a counter or
    a sort-enabling date (like YYYY-MM-DD format) to the Subject line.

    That's a really neat idea. I like it. I hadn't thought of regurgitation.
    You obviously have been helping Dialog users for a long time. Thanks!

    The "Usenet" specifier does not need to be added to the Subject line in
    the *.mbx file. Dialog displays subjects in the "Subject" column of the ThreadView Pane as "<Subject> (<From>)". - With each <...> referencing
    the field from the *.mbx (resp. the imported message).

    If you didn't just snip the empty last 2 lines (as I accidentally did
    in my second reply), you'll see import corruption on the last line.
    (First character is missing.)

    IIRC, support for more non-standard *.mbx formats was one of the open
    feature requests, that suffered from Marcus abandoning 40tude Dialog.

    I wasn't aware of the formatting peculiarities, but exporting and
    re-importing should solve most of them anyway (after some edits).

    What's taking me time on completing this project is collecting the
    scattered metadata necessary to document the setup, where I think the
    main task is to add stunnel data plus the web-site authentication info.

    What's really the worrisome task is getting Windows to NOT DELETE the passwd-recovery tool within seconds of downloading it to the computer.

    Anyway, here's the current template that I'm using for each server.

    Server: mixmin
    Permissions: read-only
    Restrictions: Old articles, updates for alt.privacy.anon-server only
    Host: localhost
    Port: 11563
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    [Mixmin]
    client = yes
    accept = localhost:11563
    connect = news.mixmin.net:563
    CAfile = ca-certs.pem
    verifyChain = yes
    checkHost = news.mixmin.net
    OCSPaia = yes
    Date: 20260911
    Users Email:
    Admin Email: Steve Crook <newsmaster@mixmin.net>
    Website: <https://www.mixmin.net/>
    Registration: none
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bernd Rose@b.rose.tmpbox@arcor.de to news.software.readers on Sun Sep 13 10:15:19 2026
    From Newsgroup: news.software.readers

    On Sun, 13th Sep 2026 06:54:09 +0100, Cromwell wrote:

    What's really the worrisome task is getting Windows to NOT DELETE the passwd-recovery tool within seconds of downloading it to the computer.

    As a possible thread it must be "unblocked" after Download from Internet.
    You can set this on the "file properties" info page or click "more info"
    and "run anyway" on Windows Defender SmartScreen warnings.

    Your AV program will probably interfere, as well. Depends on the program,
    where and how exceptions are defined. For Microsoft Defender Antivirus
    the necessary steps are outlined in the "Add exclusions" section:

    https://learn.microsoft.com/en-us/defender-endpoint/microsoft-defender-security-center-antivirus

    For any other AV program you need to study its documentation. Please note,
    that some AV programs even scan and block website links or packed download archives. If this is the case, you'll need to add an exception for the link and/or a dedicated NonAV_Download folder, as well. (It is _not_ recommended
    to exclude the main Download target folder, because this may compromise your system in cases, where the downloaded files are no known false-positives...

    Bernd
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bernd Rose@b.rose.tmpbox@arcor.de to news.software.readers on Sun Sep 13 10:16:55 2026
    From Newsgroup: news.software.readers

    On Sun, 13th Sep 2026 06:54:09 +0100, Cromwell wrote:

    What's really the worrisome task is getting Windows to NOT DELETE the passwd-recovery tool within seconds of downloading it to the computer.

    As a possible thread it must be "unblocked" after Download from Internet.
    You can set this on the "file properties" info page or click "more info"
    and "run anyway" on Windows Defender SmartScreen warnings.

    Your AV program will probably interfere, as well. Depends on the program,
    where and how exceptions are defined. For Microsoft Defender Antivirus
    the necessary steps are outlined in the "Add exclusions" section:

    https://learn.microsoft.com/en-us/defender-endpoint/microsoft-defender-security-center-antivirus

    For any other AV program you need to study its documentation. Please note,
    that some AV programs even scan and block website links or packed download archives. If this is the case, you'll need to add an exception for the link and/or a dedicated NonAV_Download folder, as well. (It is _not_ recommended
    to exclude the main Download target folder, because this may compromise your system in cases, where the downloaded files are no known false-positives...)

    Bernd
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Anton Shepelev@anton.txt@gmail.moc to news.software.readers on Mon Sep 14 04:44:24 2026
    From Newsgroup: news.software.readers

    Cromwell:

    Is there a way to just clear all the old clutter in the Dialog ALL tab?

    My 40TudeDialog has been in use for almost 25 years, so there are a lot of stale now-deprecated usenet servers in the "All" tab such as some of these

    news.software.readers (aioe) 2311
    news.software.readers (albisani) 870
    news.software.readers (bbs.nz) 9371
    news.software.readers (blueworld) 6324
    news.software.readers (bofh) 132814
    news.software.readers (chmurka) 98320
    news.software.readers (csiph) 18932
    news.software.readers (dizum) 8732
    news.software.readers (endoftheline) 2835
    news.software.readers (eternalsept) 21235
    news.software.readers (freedyne) 9762
    news.software.readers (gmane.org) 5904
    news.software.readers (hispagatos) 487302
    news.software.readers (mixmin) 200218
    news.software.readers (mozilla.org) 1765
    news.software.readers (neodome) 98382
    news.software.readers (netfront) 923
    news.software.readers (news4all) 2234
    news.software.readers (novabbs) 63248
    news.software.readers (pugleaf) 29238
    news.software.readers (samolyk) 29019
    news.software.readers (solani) 9022
    news.software.readers (sunsite) 3324
    news.software.readers (tcpreset) 19324
    news.software.readers (usenet.ovh) 598340
    news.software.readers (xsusenet) 4614
    news.software.readers (xsusenet) 11944

    paganini.bofh.team still works, Gmane has moved to news.gmane.io,
    TCPReset still works.
    --
    () ascii ribbon campaign -- against html e-mail
    /\ www.asciiribbon.org -- against proprietary attachments
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Mon Sep 14 05:37:47 2026
    From Newsgroup: news.software.readers

    On Sun, 13 Sep 2026 10:16:55 +0200, Bernd Rose wrote:
    What's really the worrisome task is getting Windows to NOT DELETE the
    passwd-recovery tool within seconds of downloading it to the computer.

    As a possible thread it must be "unblocked" after Download from Internet.
    You can set this on the "file properties" info page or click "more info"
    and "run anyway" on Windows Defender SmartScreen warnings.

    Thanks for that advice. I'm a long-time Windows user so I use exclusively
    the command line or powershell because it changes much less than the GUI.

    Plus, it's much easier to copy and paste from the admin command line:
    Here's something I hacked out a few days ago but I haven't polished it.

    1. Create a simple working directory

    Open Administrator PowerShell and run:

    New-Item -ItemType Directory -Path C:\Downloads -Force


    2. Tell Microsoft Defender to leave that directory alone

    Still in Administrator PowerShell:

    Set-MpPreference -ExclusionPath "C:\Downloads"

    Verify:

    Get-MpPreference | Select-Object -ExpandProperty ExclusionPath

    It should show:

    C:\Downloads

    This is necessary because Microsoft Defender identifies BulletsPassView
    as:

    HackTool:Win32/Passview!MSR

    It is being detected because it is a password-recovery utility.


    3. Download BulletsPassView

    From Command Prompt or PowerShell, run:

    curl.exe -L "https://www.nirsoft.net/utils/bulletspassview.zip" -o C:\Downloads\bulletspassview.zip

    The official NirSoft download is:

    https://www.nirsoft.net/utils/bulletspassview.zip


    4. Extract it

    tar -xf C:\Downloads\bulletspassview.zip -C C:\Downloads

    The ZIP contains:

    BulletsPassView.exe
    BulletsPassView.chm
    readme.txt


    5. Recover the Dialog password

    Because 40tude Dialog is 32-bit, use the 32-bit BulletsPassView.exe.

    Open 40tude Dialog and navigate to the newsserver settings so that
    the saved password is displayed as bullets.

    Then run:

    C:\Downloads\BulletsPassView.exe

    Refresh BulletsPassView while the Dialog password field is visible.

    BulletsPassView can read the password from the password textbox if
    Dialog is exposing the saved password through a standard Windows
    password control.

    The important point is that the bullets must actually be visible in
    Dialog when BulletsPassView scans.


    Why this works

    Dialog stores the password in encrypted form, but when it displays
    the server settings it decrypts the value for the password textbox. BulletsPassView reads the value exposed by that textbox; it does not
    need to decrypt Dialog's configuration file.


    Important detail

    Use the 32-bit version of BulletsPassView, even on 64-bit Windows,
    because the target application (40tude Dialog) is 32-bit.


    After recovering the password

    Copy the newsserver credentials into a password manager.

    For security, remove the Defender exclusion:

    Remove-MpPreference -ExclusionPath "C:\Downloads"

    You can then delete the BulletsPassView files if they are no longer
    needed.

    Your AV program will probably interfere, as well. Depends on the program, where and how exceptions are defined. For Microsoft Defender Antivirus
    the necessary steps are outlined in the "Add exclusions" section: https://learn.microsoft.com/en-us/defender-endpoint/microsoft-defender-security-center-antivirus

    For any other AV program you need to study its documentation. Please note, that some AV programs even scan and block website links or packed download archives. If this is the case, you'll need to add an exception for the link and/or a dedicated NonAV_Download folder, as well. (It is _not_ recommended to exclude the main Download target folder, because this may compromise your system in cases, where the downloaded files are no known false-positives...)

    I'm a long-time computer user so I am aware of the 3rd-party AV programs.
    But I don't use them anymore as Windows Defender works just fine for me.

    The readme above should help others.
    Should we post it as an article in and of itself in this newsgroup?
    What other newsgroups would benefit?

    Subject: [40tude Dialog] Reading obfuscated passwords using NirSoft BulletPassView after temporarily disabling Windows Defender

    That's kind of long though.
    Can you suggest a shorter title and/or what newsgroups to post it to?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Bernd Rose@b.rose.tmpbox@arcor.de to news.software.readers on Mon Sep 14 07:15:28 2026
    From Newsgroup: news.software.readers

    On Mon, 14th Sep 2026 05:37:47 +0100, Cromwell wrote:

    The readme above should help others.
    Should we post it as an article in and of itself in this newsgroup?
    What other newsgroups would benefit?

    Subject: [40tude Dialog] Reading obfuscated passwords using NirSoft BulletPassView after temporarily disabling Windows Defender

    That's kind of long though.
    Can you suggest a shorter title and/or what newsgroups to post it to?

    No (re-)post to other newsgroups. This is the main group for Non-German
    users interested in 40tude Dialog. And the German users already have an
    FAQ entry: https://www.barghahn-online.de/4td_faq/sicherheit.php#passwort

    Repost here is unnecessary, as well. Anybody interested will have read
    this thread, already. There is not much traffic on 40tude Dialog here,
    anymore. Therefore, people interested in this program will have read the thread regardless of the subject line. TBH, your lengthy explanations
    of fairly simple matters are more likely to have people stop reading.
    Opening another thread will not change this.

    Bernd
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Mon Sep 14 06:22:05 2026
    From Newsgroup: news.software.readers

    On Mon, 14 Sep 2026 04:44:24 +0300, Anton Shepelev wrote:
    paganini.bofh.team still works, Gmane has moved to news.gmane.io,
    TCPReset still works.

    Thanks. I added them to the passwd.mbx file for reference use.
    Can all folks help fix this so that it makes for a good reference?

    Server: Gmane
    Comments: no registration, read-write
    Restrictions: None known (hosts public mailing list archives)
    Host: localhost
    Port: 119 or 4x563 (choose x so the port is unique)
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    Stunnel.conf:
    [Gmane]
    client = yes
    accept = localhost:4x563 (match socket to 40tude Dialog newsserver setup)
    connect = news.gmane.io:563
    CAfile = ca-certs.pem
    verifyChain = yes
    checkHost = news.gmane.io
    OCSPaia = yes
    Date: 20260913
    Users Email:
    Admin Email: Lars Magne Ingebrigtsen <larsi@gnus.org>
    Website: <https://gmane.io/>
    Registration: none
    Site info: <https://en.wikipedia.org/wiki/Gmane>

    Server: paganini
    Comments: no registration, read-write, no alt groups
    Host: paganini.bofh.team
    Port: 4x563 (choose x so the port is unique)
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    40tude Dialog stunnel.conf:
    [Paganini]
    client = yes
    accept = localhost:4x563 (match socket to 40tude Dialog newsserver setup)
    connect = paganini.bofh.team:563
    CAfile = ca-certs.pem
    verifyChain = yes
    checkHost = paganini.bofh.team
    OCSPaia = yes
    Date: 20260911
    Users Email:
    Admin Email: Ivo Gandolfo <usenet@bofh.team>
    Website: <>
    Registration: none
    More info: <>

    Server: tcpreset
    Comments: no-registration, read/write, no 563?
    Host: news.tcpreset.net
    Port: 119
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    40tude Dialog stunnel.conf: none
    Date: 20260911
    Users Email:
    Admin Email: Gabx info@tcpreset.net
    Website: https://tcpreset.net/
    Registration: none
    More info: https://news.tcpreset.net/

    Server: mixmin
    Comments: no registration, read/write only for alt.privacy.anon-server
    Host: localhost
    Port: 4x563 (choose x so the socket is unique)
    SSL: unchecked
    Username: empty
    Password: empty
    Allwd conn: 2
    Use pipelining: checked
    40tude Dialog stunnel.conf:
    [Mixmin]
    client = yes
    accept = localhost:4x563 (match socket to 40tude Dialog newsserver setup)
    connect = news.mixmin.net:563
    CAfile = ca-certs.pem
    verifyChain = yes
    checkHost = news.mixmin.net
    OCSPaia = yes
    Date: 20260911
    Users Email:
    Admin Email: Steve Crook <newsmaster@mixmin.net>
    Website: <https://www.mixmin.net/>
    Registration: none
    More info: <>
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Mon Sep 14 06:38:34 2026
    From Newsgroup: news.software.readers

    On Mon, 14 Sep 2026 07:15:28 +0200, Bernd Rose wrote:
    Repost here is unnecessary, as well. Anybody interested will have read
    this thread, already. There is not much traffic on 40tude Dialog here, anymore. Therefore, people interested in this program will have read the thread regardless of the subject line. TBH, your lengthy explanations
    of fairly simple matters are more likely to have people stop reading.
    Opening another thread will not change this.

    Thanks for the advice.
    I will follow your advice.

    I documented government systems in the defense industry for decades.
    Most people absolutely believe documentation should be short and simple.
    The government doesn't. Neither does the defense industry believe that.
    Airline industry also. Although the car industry does believe that.
    Ever read a shop manual?

    One mistake and you're dead. Or someone else is dead.
    Documentation is NEVER to be short and simple unless it actually is.

    Although, nobody dies if the usenet documentation skips key steps.
    So your advice is apropos, for usenet documentation anyways. :->

    Anyways, I'm working on the perfect passwd.mbx file as we speak.
    It will take some time to perfect it though.

    I may have to ask alt.free.newswervers or news.admin.peering for help
    as most of the information is boilerplate newsserver setup (with stunnel).

    Of course, dialog needs stunnel while most modern newsreaders do not.
    But everything else outside of stunnel will be newsreader agnostic.

    Who would you ask for help in documenting all free news servers?
    (which are free, on purpose, and not just accidentally open)

    I think I have most of them, but I could have missed some.
    Which free news servers have I missed?

    grep ^Server: passwd.mbx | sort -u
    Server: aioe
    Server: albasani
    Server: bbs.nz
    Server: blueworld
    Server: chmurka
    Server: csiph
    Server: dizum
    Server: esept
    Server: freedyne.de
    Server: gmane
    Server: grc
    Server: killfile
    Server: mixmin
    Server: neodome
    Server: netfront
    Server: ovh
    Server: paganini
    Server: pugleaf
    Server: ripco
    Server: samkolyk
    Server: solani
    Server: tambov.ru
    Server: tcpreset
    Server: tulanet
    Server: wieslauf
    Server: xsusenet

    There must be more purposefully free text read or read/write nntp servers.
    A lot more most likely, as I can't possibly know them all just like that.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Anton Shepelev@foo@bar.baz to news.software.readers on Mon Sep 14 21:07:20 2026
    From Newsgroup: news.software.readers

    Cromwell:

    Who would you ask for help in documenting all free news
    servers? (which are free, on purpose, and not just
    accidentally open)

    I think I have most of them, but I could have missed some.
    Which free news servers have I missed?
    [...]
    Server: gmane

    If Gmane counts, so should <news.fidonet.fi>, with a website
    at <https://www.fidonet.fi>. It is an NNTP gateway to
    Fidonet.


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Mon Sep 14 18:51:22 2026
    From Newsgroup: news.software.readers

    On Mon, 14 Sep 2026 21:07:20 +0300, Anton Shepelev wrote:
    I think I have most of them, but I could have missed some.
    Which free news servers have I missed?
    [...]
    Server: gmane

    If Gmane counts, so should <news.fidonet.fi>, with a website
    at <https://www.fidonet.fi>. It is an NNTP gateway to
    Fidonet.

    Thanks for adding fidonet. I'm not really sure what "gmane" is though.
    Nor fidonet.

    So let me look it up so that I don't seem like I'm too stupid. :->

    Oh my. Gmane is an NNTP-accessible mailing-list archive/gateway, rather
    than a general-purpose free Usenet transit server. Its current service says that it provides access to mailing lists through news.gmane.io using NNTP.

    I don't even know what that means.
    Is it like paganini and ovh and tcpreset, or not?

    I can't tell from that description, mainly because I don't know what a mailing-list archive/gateway is.

    The list is supposed to only contain free, intentionally public, general-purpose NNTP/Usenet servers that we can point a newsreader to.

    FidoNet is even more different when I look it up.

    FidoNet is a separate, longstanding store-and-forward computer network run
    by hobbyist system operators. Some FidoNet discussion areas (echomail) are gated into Usenet/NNTP.

    news.fidonet.fi is therefore an NNTP gateway into FidoNet, not a
    conventional Usenet server.

    The funny thing is even after looking those two up, I still don't know what they are. But that's because I am only used to conventional nntp servers.

    For now, I guess I have to remove them becauzse I don't even know what they
    do, when all I want is to point 40tude Dialog to a nntp server and port.

    May I ask a dumb question born of my own lack of experience of......
    Do they work that way or not?

    Can anyone point 40tude Dialog to news.gmane.io:119 or news.fidonet.fi:119
    to read usenet articles on usenet newsgroups, or not, for free (with or
    without registration)?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Mon Sep 14 20:11:16 2026
    From Newsgroup: news.software.readers


    telnet news.gmane.io 119 Connecting To news.gmane.io...
    200 news.gmane.io InterNetNews NNRP server INN 2.6.3 ready (posting ok)
    group alt.test
    411 No such group alt.test
    group news.software.readers
    411 No such group news.software.readers
    list active
    ...
    gmane.lisp.stefil.devel 0000000014 0000000001 m
    gmane.comp.graphics.libmv.devel 0000001601 0000000001 m
    gmane.comp.clustering.ucarp.general 0000000225 0000000003 m
    gmane.comp.java.ofbiz.devel 0000144334 0000000001 m
    gmane.comp.java.ofbiz.scm 0000043833 0000000001 m
    gmane.comp.cryptography.viff.patches 0000000161 0000000001 m
    gmane.comp.graphics.smartbody.scm 0000007073 0000000001 m
    ...
    quit
    205 Bye!
    Connection to host lost.

    Gmane absolutely is an NNTP server.
    But it is not a general-purpose Usenet NNTP server.

    telnet news.fidonet.fi 119
    Connecting To news.fidonet.fi...
    200 Welcome to SmapiNNTPd/Linux/IPv6 mxt 20260114 (posting may be allowed)
    group alt.test
    411 No such newsgroup
    group news.software.readers
    411 No such newsgroup
    list active
    215 List of newsgroups follows
    +getaccess+ 1 1 n
    +localchat+ 70 1 n
    +localtest+ 87 1 n
    .
    post
    340 Send article to be posted. End with <CR-LF>.<CR-LF>
    quit
    205 Goodbye
    Connection to host lost.

    Apparently it's a public NNTP service with posting, but just for Usenet.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Anton Shepelev@anton.txt@gmail.moc to news.software.readers on Tue Sep 15 02:35:47 2026
    From Newsgroup: news.software.readers

    Cromwell:

    Who would you ask for help in documenting all free news
    servers?Thanks for adding fidonet. I'm not really sure
    what "gmane" is though. Nor fidonet.

    I thought you knew about Gmane because you already had it in
    your list. Gmane is not a public-access Usenet server. It
    is an NNTP interface to mailing lists. A mailing list is a
    public forum based on e-mail, for example:

    <https://lists.freebsd.org/>

    The list is supposed to only contain free, intentionally
    public, general-purpose NNTP/Usenet servers that we can
    point a newsreader to.

    Gmane and fidonet.fi qualify this, except for "general-
    purpose NNTP/Usenet servers".

    The funny thing is even after looking those two up, I
    still don't know what they are. But that's because I am
    only used to conventional nntp servers.

    They /are/ conventional NNTP servers you can point a
    newsreader to. But they are not Usenet servers. NNTP
    is wider than Usenet.
    --
    () ascii ribbon campaign -- against html e-mail
    /\ www.asciiribbon.org -- against proprietary attachments
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Cromwell@cromwell@cromwell.com to news.software.readers on Tue Sep 15 01:13:40 2026
    From Newsgroup: news.software.readers

    On Tue, 15 Sep 2026 02:35:47 +0300, Anton Shepelev wrote:
    Who would you ask for help in documenting all free news
    servers?Thanks for adding fidonet. I'm not really sure
    what "gmane" is though. Nor fidonet.

    I thought you knew about Gmane because you already had it in
    your list. Gmane is not a public-access Usenet server. It
    is an NNTP interface to mailing lists. A mailing list is a
    public forum based on e-mail, for example:

    <https://lists.freebsd.org/>

    Thanks. I was almost completely ignorant of those lists, mainly because in
    all my time of being on usenet, I had wrongly equated nntp with usenet.

    That's my fault.
    I'm not sure how to use gmane but I see it's nntp but not usenet.
    So I'll remove it from the list.

    Thank you for being patient with my ignorance.

    The list is supposed to only contain free, intentionally
    public, general-purpose NNTP/Usenet servers that we can
    point a newsreader to.

    Gmane and fidonet.fi qualify this, except for "general-
    purpose NNTP/Usenet servers".

    I see that now as I learn empirically, so I ran two tests in another post.
    telnet news.gmane.io
    telnet news.fidonet.fi 119

    I naively tried to post to alt.test, and, as you could guess, I failed.
    They're different things, it seems, but both are NNTP but not Usenet.

    The funny thing is even after looking those two up, I
    still don't know what they are. But that's because I am
    only used to conventional nntp servers.

    They /are/ conventional NNTP servers you can point a
    newsreader to. But they are not Usenet servers. NNTP
    is wider than Usenet.

    Yes. I see that now (see my other post with the telnet results).

    This interaction reminds me of a when I finally bought a tool to lower a transmission instead of using a normal jack and using all sorts of blocks.

    They're both jacks, but only one of them is a transmission jack.

    Like all tools, I'm struggling to think of what I would do that I might
    find useful if I started using gmane/fidonet, but that will take a while
    for me to figure out as I don't yet know what they are good for.

    But I do see they're NNTP and not usenet, which is your main point.
    The list I was compiling was for 40tude dialog usenet, not just nntp.

    I apologize for not understanding the differences.
    --- Synchronet 3.22a-Linux NewsLink 1.2