• INN-CURRENT updates not happening

    From doctor@doctor@doctor.nl2k.ab.ca (The Doctor) to news.software.nntp on Sat Aug 15 15:22:35 2026
    From Newsgroup: news.software.nntp

    No problems with STABLE.

    Also do we still have a github repository?
    --
    Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
    Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising! Look at Psalms 14 and 53 on Atheism ; 31 years in the ISP business!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From doctor@doctor@doctor.nl2k.ab.ca (The Doctor) to news.software.nntp on Mon Aug 17 04:09:49 2026
    From Newsgroup: news.software.nntp

    In article <115q07r$1mke$6@gallifrey.nk.ca>,
    The Doctor <doctor@doctor.nl2k.ab.ca> wrote:
    No problems with STABLE.

    Also do we still have a github repository?
    --
    Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
    Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising!
    Look at Psalms 14 and 53 on Atheism ; 31 years in the ISP business!

    What is happening to INN-CURRENT ?
    --
    Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
    Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising! Look at Psalms 14 and 53 on Atheism ; 31 years in the ISP business!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?Q?Julien_=C3=89LIE?=@iulius@nom-de-mon-site.com.invalid to news.software.nntp on Mon Aug 17 10:37:43 2026
    From Newsgroup: news.software.nntp

    Hi The Doctor,

    What is happening to INN-CURRENT ?
    Sorry I was off this week-end and only noticed your message now. The
    compiler emited a warning during the build. This should be fixed now,
    and the snapshot will be generated fine tomorrow.

    Thanks for pointing out the issue!


    Also do we still have a github repository?

    Yes:
    https://github.com/InterNetNews/inn
    --
    Julien |eLIE

    -2-arCo Nous parlerons quand l'interpr|?te dormira. [Bong-a!]
    rCo Il dort. On peut parler.-a-+ (Ast|-rix)

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From doctor@doctor@doctor.nl2k.ab.ca (The Doctor) to news.software.nntp on Mon Aug 17 17:05:55 2026
    From Newsgroup: news.software.nntp

    In article <115uh8p$uifk$1@news.trigofacile.com>,
    Julien | LIE <iulius@nom-de-mon-site.com.invalid> wrote:
    Hi The Doctor,

    What is happening to INN-CURRENT ?
    Sorry I was off this week-end and only noticed your message now. The >compiler emited a warning during the build. This should be fixed now,
    and the snapshot will be generated fine tomorrow.

    Thanks for pointing out the issue!


    No problem / sans probleme.


    Also do we still have a github repository?

    Yes:
    https://github.com/InterNetNews/inn


    I might have to e-mail you script of what haapenes when I use source from Git.

    --
    Julien |eLIE

    -2-arCo Nous parlerons quand l'interpr|?te dormira. [Bong-a!]
    rCo Il dort. On peut parler.-a-+ (Ast|-rix)

    --
    Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
    Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising! Look at Psalms 14 and 53 on Atheism ; 31 years in the ISP business!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From doctor@doctor@doctor.nl2k.ab.ca (The Doctor) to news.software.nntp on Mon Aug 17 17:19:14 2026
    From Newsgroup: news.software.nntp

    In article <115vf1j$1v8i$10@gallifrey.nk.ca>,
    The Doctor <doctor@doctor.nl2k.ab.ca> wrote:
    In article <115uh8p$uifk$1@news.trigofacile.com>,
    Julien | LIE <iulius@nom-de-mon-site.com.invalid> wrote:
    Hi The Doctor,

    What is happening to INN-CURRENT ?
    Sorry I was off this week-end and only noticed your message now. The >>compiler emited a warning during the build. This should be fixed now,
    and the snapshot will be generated fine tomorrow.

    Thanks for pointing out the issue!


    No problem / sans probleme.


    Also do we still have a github repository?

    Yes:
    https://github.com/InterNetNews/inn


    I might have to e-mail you script of what haapenes when I use source from Git.


    Eroor now available at https://www.nk.ca/~doctor/inngittypesctipr

    --
    Julien |eLIE

    -2-arCo Nous parlerons quand l'interpr|?te dormira. [Bong-a!]
    rCo Il dort. On peut parler.-a-+ (Ast|-rix)



    --
    Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
    Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising!
    Look at Psalms 14 and 53 on Atheism ; 31 years in the ISP business!
    --
    Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
    Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising! Look at Psalms 14 and 53 on Atheism ; 31 years in the ISP business!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?Q?Julien_=C3=89LIE?=@iulius@nom-de-mon-site.com.invalid to news.software.nntp on Tue Aug 18 10:50:14 2026
    From Newsgroup: news.software.nntp

    Hi The Doctor,

    What is happening to INN-CURRENT ?

    inn-CURRENT-20260818.tar.gz was correcty generated last night.


    I might have to e-mail you script of what haapenes when I use source from Git.

    Eroor now available at https://www.nk.ca/~doctor/inngittypesctipr

    What contains the "configinn" script you're executing? It is not a file shipped with INN.

    To build INN from Git source, you need to run "./autogen" first, then "./configure" along with all your configure flags (perhaps it is what
    your "configinn" script does).

    I see you run "autoreconf -fi" but that's not documented anywhere. The BOOTSTRAP file clearly states to run "./autogen".
    It may be the reason why libtool fails to install INN as the "-i" flag
    to autoreconf takes different files than the ones used by INN.
    --
    Julien |eLIE

    -2-aWhenever you set out to do something, something else must be done
    first.-a-+ (Murphy's Fourth Corollary)

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From doctor@doctor@doctor.nl2k.ab.ca (The Doctor) to news.software.nntp on Tue Aug 18 15:50:13 2026
    From Newsgroup: news.software.nntp

    In article <11616c6$13n2d$1@news.trigofacile.com>,
    Julien | LIE <iulius@nom-de-mon-site.com.invalid> wrote:
    Hi The Doctor,

    What is happening to INN-CURRENT ?

    inn-CURRENT-20260818.tar.gz was correcty generated last night.


    I might have to e-mail you script of what haapenes when I use source from Git.

    Eroor now available at https://www.nk.ca/~doctor/inngittypesctipr

    What contains the "configinn" script you're executing? It is not a file >shipped with INN.

    Mon erreur/ My mistake.

    ./configure GPG=/usr/local/bin/gpg2 CC=/usr/local/bin/clang22 PERL=/usr/local/bin/perl LIBTOOL=/usr/local/bin/libtool --mandir=/usr/local/man --prefix=/usr/local/news --with-spool-dir=/usr/local/news/spool --with-log-dir=/var/log/news --with-tmp-dir=/usr/local/news/tmp --sysconfdir=/usr/local/news/etc --with-run-dir=/usr/local/news/run --with-db-dir=/usr/local/news/db --datarootdir=/usr/local/news/share --with-perl --with-bdb-lib=/usr/local/lib/db5 --with-bdb-include=/usr/local/include/db5 --without-krb5 --enable-largefiles --enable-keywords --with-sasl=/usr/local --with-openssl-lib=/usr/local --with-openssl-include=/usr/local --with-sqlite3=/usr/local/ --with-canlock=/usr/local --with-blocklist


    To build INN from Git source, you need to run "./autogen" first, then >"./configure" along with all your configure flags (perhaps it is what
    your "configinn" script does).

    I see you run "autoreconf -fi" but that's not documented anywhere. The >BOOTSTRAP file clearly states to run "./autogen".
    It may be the reason why libtool fails to install INN as the "-i" flag
    to autoreconf takes different files than the ones used by INN.


    Just did a fresh pull and that works.

    so

    What I did was

    git clone https://github.com/InterNetNews/inn /usr/source/inn

    cd /usr/source/inn

    ./autogen

    Ran my script above

    gmake clean; gmake

    gmake update

    100% work.

    Ca marche bien.

    Merci/ Thank you.

    Any other BSDs out there?
    --
    Julien |eLIE

    -2-aWhenever you set out to do something, something else must be done
    first.-a-+ (Murphy's Fourth Corollary)

    --
    Member - Liberal International This is doctor@nk.ca Ici doctor@nk.ca
    Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising! Look at Psalms 14 and 53 on Atheism ; 31 years in the ISP business!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?Q?Julien_=C3=89LIE?=@iulius@nom-de-mon-site.com.invalid to news.software.nntp on Tue Aug 18 18:49:22 2026
    From Newsgroup: news.software.nntp

    Hi The Doctor,

    --with-db-dir=/usr/local/news/db

    Note you can also now put the history database in another directory. A --with-history-dir flag has recently been added to configure that. If
    you want to use it, you need creating the directory and moving by hand
    your current history files into that directory while INN is not running.
    Add the pathhistory variable to inn.conf to specify that directory.
    Then start INN.


    --enable-keywords

    This feature is not of great use. You also need setting keywords
    (inn.conf parameter) to true, and INN will generate a Keywords header
    field for the articles posted through your server. I see your articles
    do not have that header field, which means you are not using that feature.


    Just did a fresh pull and that works.

    git clone https://github.com/InterNetNews/inn /usr/source/inn

    cd /usr/source/inn

    ./autogen

    Ran my script above

    gmake clean; gmake

    gmake update

    100% work.

    Exactly! Glad to know it works.

    You could even run the test suite if you want ("gmake tests")

    Also, you do not need running "gmake clean" on a fresh pull.
    --
    Julien |eLIE

    -2-aSome joys are better expressed in silence as a smile holds more
    meaning than words.-a-+

    --- Synchronet 3.22a-Linux NewsLink 1.2