From https://github.com/opnsense/coreRunning build step: update
Passing arguments: (none)
Fetching /usr/core:
M src/etc/rcUpdating branch stable/26.7 of /usr/core:
remote: Enumerating objects: 285, done.Fetching /usr/plugins:
fatal: unable to access 'https://github.com/opnsense/plugins/': Resolving timed out after 300169 millisecondsUpdating branch stable/26.7 of /usr/plugins:
On 09.09.26 05:24, Nenhum_de_Nos wrote:
Hi,
Hey Matheus,
Last month I had issues with 15.1R on two Orange Pi 5 Plus (OP5P) devices, where git would not resolve ok for opnsense repos on github. After some time and tests, I got to figure that ARM64 was not enough to trigger it, it has to be on OP5P here. I tried more then 3 times on the OP5P and more than 3 elsewhere.
how did you get 15.1 running on the Orange PI 5 Plus? I have one lying around, I only know about personalbsd.org and S|+ren Schmidt's 14.X
images. Did you build one yourself?
I'd be happy to test on mine, but every attempt to upgrade from 14 to 15
on mine failed.
Thanks
Florian
=20er some time and tests, I got to figure that ARM64 was not enough to trig=
=20September 12, 2026 at 11:23 AM, "Florian Smeets" <flo@smeets.xyz mail= to:flo@smeets.xyz?to=3D%22Florian%20Smeets%22%20%3Cflo%40smeets.xyz%3E > = wrote:
=20
=20
On 09.09.26 05:24, Nenhum_de_Nos wrote:
=20=20
=20=20
Hi,
=20=20
Hey Matheus,
=20=20
=20=20
Last month I had issues with 15.1R on two Orange Pi 5 Plus (OP5P) = devices, where git would not resolve ok for opnsense repos on github. Aft=
14.X=20=20=20
how did you get 15.1 running on the Orange PI 5 Plus? I have one l= ying=20
around, I only know about personalbsd.org and S=C3=B8ren Schmidt's=
to 15=20images. Did you build one yourself?
=20=20
I'd be happy to test on mine, but every attempt to upgrade from 14=
a hdd disk using usb to sata and serial adapter to have the console.on mine failed.=20Hi Florian,
=20=20
Thanks
Florian
=20
=20
=20to install 15.1R on the Orange Pi 5 Plus (OP5P), I download the arm m= emstick install media and then I boot the OP5P using it on a flash drive,=
=20da1. Need to use usb ethernet for this.
=20I use gpt labels as the usb install media has da0 and the storage has=
=20And=20here comes the main question: Why if I take the HDD I use on OP5P, =
=20Once finished, just reboot.
=20
=20I use realtek-re-kmod198 for 2.5Gbps NICs.
=20
=20I just reinstalled one OP5P here:
=20
=20Cloning into 'opnsense'...
remote: Enumerating objects: 589, done.
remote: Counting objects: 100% (182/182), done.
remote: Compressing objects: 100% (67/67), done.
Received disconnect from 4.228.31.150 port 22:11: Bye Bye
Disconnected from 4.228.31.150 port 22
=20
=20fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
=20
=20On RPI5 that was not present.
=20
=20thanks,
=20
=20matheus
=20
Hey Matheus,<br> <br> <br> Last month I had issues with 15.1R on two =Orange Pi 5 Plus (OP5P) devices, where git would not resolve ok for opnse=
September 12, 2026 at 6:49 PM, "Nenhum_de_Nos" <lojas@arroway.org <lojas@arroway.org?to=3D%22Nenhum_de_Nos%22%20%3Clojas%40arroway.org%3E>> wrote:te:
September 12, 2026 at 11:23 AM, "Florian Smeets" <flo@smeets.xyz mailto: flo@smeets.xyz?to=3D%22Florian%20Smeets%22%20%3Cflo%40smeets.xyz%3E > wro=
On 09.09.26 05:24, Nenhum_de_Nos wrote:
Hi,
Hey Matheus,
Last month I had issues with 15.1R on two Orange Pi 5 Plus (OP5P) devices=,
where git would not resolve ok for opnsense repos on github. After someit
time and tests, I got to figure that ARM64 was not enough to trigger it, =
has to be on OP5P here. I tried more then 3 times on the OP5P and more th=an
3 elsewhere.
how did you get 15.1 running on the Orange PI 5 Plus? I have one lying around, I only know about personalbsd.org and S=C3=B8ren Schmidt's 14.X images. Did you build one yourself?
I'd be happy to test on mine, but every attempt to upgrade from 14 to 15
on mine failed.
Thanks
Florian
Hi Florian,,
to install 15.1R on the Orange Pi 5 Plus (OP5P), I download the arm
memstick install media and then I boot the OP5P using it on a flash drive=
a hdd disk using usb to sata and serial adapter to have the console..
I use gpt labels as the usb install media has da0 and the storage has da1=
Need to use usb ethernet for this.
Once finished, just reboot.
I use realtek-re-kmod198 for 2.5Gbps NICs.
I just reinstalled one OP5P here:
Cloning into 'opnsense'...
remote: Enumerating objects: 589, done.
remote: Counting objects: 100% (182/182), done.
remote: Compressing objects: 100% (67/67), done.
Received disconnect from 4.228.31.150 port 22:11: Bye Bye
Disconnected from 4.228.31.150 port 22
fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
On RPI5 that was not present.
thanks,
matheus
And here comes the main question: Why if I take the HDD I use on OP5P,
that shows all those errors above, and boot it on RPI5 it all runs fine?
Tested this week, worked fine. :|
matheus
------------
"We will call you Cygnus,
The God of balance you shall be."
=20.
=20Please try a -HEAD snapshot on both and see if they work okay for you=
=20Hi=20Adrian,
=20-adrian
=20
=20%3E > wrote:
=20On Fri, 18 Sept 2026 at 11:59, Nenhum_de_Nos <lojas@arroway.org mailt= o:lojas@arroway.org > wrote:
=20
=20
September 12, 2026 at 6:49 PM, "Nenhum_de_Nos" <lojas@arroway.org m= ailto:lojas@arroway.org?to=3D%22Nenhum_de_Nos%22%20%3Clojas%40arroway.org=
5P) devices, where git would not resolve ok for opnsense repos on github.==20
=20
September 12, 2026 at 11:23 AM, "Florian Smeets" <flo@smeets.xyz = mailto:flo@smeets.xyz mailto:flo@smeets.xyz mailto:flo@smeets.xyz ?to=3D= %22Florian%20Smeets%22%20%3Cflo%40smeets.xyz http://40smeets.xyz/ %3E > w= rote:
=20
=20
On 09.09.26 05:24, Nenhum_de_Nos wrote:
=20=20
=20=20
Hi,
=20=20
Hey Matheus,
=20=20
=20=20
Last month I had issues with 15.1R on two Orange Pi 5 Plus (OP=
ne lying=20=20=20
how did you get 15.1 running on the Orange PI 5 Plus? I have o=
rg/ and S=C3=B8ren Schmidt's 14.X=20around, I only know about personalbsd.org http://personalbsd.o=
m 14 to 15=20images. Did you build one yourself?
=20=20
I'd be happy to test on mine, but every attempt to upgrade fro=
rm memstick install media and then I boot the OP5P using it on a flash dr=on mine failed.
=20=20
Thanks
Florian
=20
Hi Florian,
=20
to install 15.1R on the Orange Pi 5 Plus (OP5P), I download the a=
has da1. Need to use usb ethernet for this.=20
I use gpt labels as the usb install media has da0 and the storage=
5P, that shows all those errors above, and boot it on RPI5 it all runs fi==20
Once finished, just reboot.
=20
I use realtek-re-kmod198 for 2.5Gbps NICs.
=20
I just reinstalled one OP5P here:
=20
Cloning into 'opnsense'...
remote: Enumerating objects: 589, done.
remote: Counting objects: 100% (182/182), done.
remote: Compressing objects: 100% (67/67), done.
Received disconnect from 4.228.31.150 port 22:11: Bye Bye
Disconnected from 4.228.31.150 port 22
=20
fetch-pack: unexpected disconnect while reading sideband packet
fatal: early EOF
fatal: fetch-pack: invalid index-pack output
=20
On RPI5 that was not present.
=20
thanks,
=20
matheus
=20And here comes the main question: Why if I take the HDD I use on OP=
=20
Tested this week, worked fine. :|
=20
matheus
=20
------------
"We will call you Cygnus,
The God of balance you shall be."
September 21, 2026 at 12:25 PM, "Adrian Chadd" <adrian@freebsd.org mailto:adrian@freebsd.org?to=%22Adrian%20Chadd%22%20%3Cadrian%40freebsd.org%3E > wrote:
Please try a -HEAD snapshot on both and see if they work okay for you.
-adrian
Hi Adrian,
A quick answer: Installed yesterday
uname -a
FreeBSD op5p_16 16.0-CURRENT FreeBSD 16.0-CURRENT #0 main-n289479-a6deeaa2fb3b: Mon Sep 21 12:52:06 UTC 2026-a-a-a-a root@releng3.nyi.freebsd.org mailto:root@releng3.nyi.freebsd.org :/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
and same issue:
Cloning into '/usr/tools'...-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a-a
fatal: unable to access 'https://github.com/opnsense/tools.git/': Resolving timed out after 300032 milliseconds
I got errors building pkg from opnsense ports, both 2.8.4 and 2.3.1 (as last try). I had to use pkg from pkg repo on 16-current.
My plan was to try 14.3 (again) and 14.5. Will it help?
thanks,
matheus
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 76 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 60:32:11 |
| Calls: | 1,265 |
| Calls today: | 1 |
| Files: | 1,362 |
| D/L today: |
4 files (9,632K bytes) |
| Messages: | 286,219 |