1. Forum
  2. USENET
  3. comp.sys.tandy

  • Troubleshooting TRS-80 Expansion Interface?

    From raymond.day@raymond.day@gmail.com to comp.sys.tandy on Thu Sep 15 05:53:42 2016
    From Newsgroup: comp.sys.tandy

    After years I got my old TRS-80 down from the closet. What I remember it did not work. But when I got it down and plug it all back in with the 3 disk drives it worked and I booted up some old programs and games and bought back a lot of good memory's.

    But reading some disk all the sudden it could not read one. I reset it and power on and off and with a disk or any other boot disk in the boot drive it just spins the head never moves now.

    I clean the ribbon cable connections and plugs. At lest on the drive they are gold plated.

    The TRS-80 still works. If I turn off the Expansion Interface it comes up with in put RAM.

    It just says at the one junk screen on resets with a disk in the drive and spins it but never moves the head. I can move the head my hand and on a reset it parts to track 0 and never moves from there now.

    Not sure what is wrong it was working. I guess it was like this when I put it away years ago. So with 20 years time it like fixed it self but now not working. It was working for like 2 days.

    Any one know what I could do? I removed the RS232 board in it. Still no good.

    May best guess maybe the RAM went back. I got a 48K Expansion Interface.

    I hope some one can help.

    -Raymond Day
    --- Synchronet 3.21d-Linux NewsLink 1.2
  • From raymond.day@raymond.day@gmail.com to comp.sys.tandy on Thu Sep 15 07:06:51 2016
    From Newsgroup: comp.sys.tandy

    Wow I fixed it. On the boot drive I just had to clean the head of the drive. I guess that was what was wrong all these years.

    -Raymond Day
    --- Synchronet 3.21d-Linux NewsLink 1.2