• Hot air rework recommendations?

    From Louis Ohland@ohland@charter.net to comp.sys.ibm.ps2.hardware on Sun Nov 8 19:39:39 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    I'm being lured in with the videos about making LOTS of money by
    repairing PS/2s... ;)

    My soldering sucks, but not anything to do with solder sucking or
    solder braid.

    I lack the deft touch of Dr. Jim Shorney. My bedside manner is atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that suggest a solder iron and desoldering braid will do me, but past failed attempts
    don't fill me with confidence.

    Non-Red Chinee gear, please!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Kevin Bowling@kevin.bowling@kev009.com to comp.sys.ibm.ps2.hardware on Mon Nov 9 15:50:36 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a I'm being lured in with the videos about making LOTS of money by repairing PS/2s... ;)

    -a My soldering sucks, but not anything to do with solder sucking or
    solder braid.

    -a I lack the deft touch of Dr. Jim Shorney. My bedside manner is atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that suggest a solder iron and desoldering braid will do me, but past failed attempts
    don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey. Ranging from an
    MBT and dedicated hot air station to the mil depot level repair PRC 2000 system. I would keep a search for a reasonably complete MBT and add a dedicated hot air station.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Louis Ohland@ohland@charter.net to comp.sys.ibm.ps2.hardware on Mon Nov 9 19:01:45 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    Wendt out on the porch and czeched, I have a PPS-75.

    Where that compares to an MBT, I dinna ken right now, but my SWAG is not
    so well.

    Kevin Bowling wrote:
    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a-a I'm being lured in with the videos about making LOTS of money by
    repairing PS/2s... ;)

    -a-a My soldering sucks, but not anything to do with solder sucking or
    solder braid.

    -a-a I lack the deft touch of Dr. Jim Shorney. My bedside manner is
    atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that suggest
    a solder iron and desoldering braid will do me, but past failed
    attempts don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey.-a Ranging from an
    MBT and dedicated hot air station to the mil depot level repair PRC 2000 system.-a I would keep a search for a reasonably complete MBT and add a dedicated hot air station.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Louis Ohland@ohland@charter.net to comp.sys.ibm.ps2.hardware on Mon Nov 9 19:16:03 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    Also called the "MBT-101"

    Louis Ohland wrote:
    Wendt out on the porch and czeched, I have a PPS-75.

    Where that compares to an MBT, I dinna ken right now, but my SWAG is not
    so well.

    Kevin Bowling wrote:
    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a-a I'm being lured in with the videos about making LOTS of money by
    repairing PS/2s... ;)

    -a-a My soldering sucks, but not anything to do with solder sucking or
    solder braid.

    -a-a I lack the deft touch of Dr. Jim Shorney. My bedside manner is
    atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that
    suggest a solder iron and desoldering braid will do me, but past
    failed attempts don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey.-a Ranging from an
    MBT and dedicated hot air station to the mil depot level repair PRC
    2000 system.-a I would keep a search for a reasonably complete MBT and
    add a dedicated hot air station.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Louis Ohland@ohland@charter.net to comp.sys.ibm.ps2.hardware on Mon Nov 9 20:05:14 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    Huh, "Pik Tips" work with the SX-100 handpiece...

    Louis Ohland wrote:
    Also called the "MBT-101"

    Louis Ohland wrote:
    Wendt out on the porch and czeched, I have a PPS-75.

    Where that compares to an MBT, I dinna ken right now, but my SWAG is
    not so well.

    Kevin Bowling wrote:
    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a-a I'm being lured in with the videos about making LOTS of money by >>>> repairing PS/2s... ;)

    -a-a My soldering sucks, but not anything to do with solder sucking or >>>> solder braid.

    -a-a I lack the deft touch of Dr. Jim Shorney. My bedside manner is
    atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that
    suggest a solder iron and desoldering braid will do me, but past
    failed attempts don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey.-a Ranging from
    an MBT and dedicated hot air station to the mil depot level repair
    PRC 2000 system.-a I would keep a search for a reasonably complete MBT
    and add a dedicated hot air station.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Kevin Bowling@kevin.bowling@kev009.com to comp.sys.ibm.ps2.hardware on Tue Nov 10 09:43:12 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    On 11/9/26 7:05 PM, Louis Ohland wrote:
    Huh, "Pik Tips" work with the SX-100 handpiece...

    Louis Ohland wrote:
    Also called the "MBT-101"

    Louis Ohland wrote:
    Wendt out on the porch and czeched, I have a PPS-75.

    Where that compares to an MBT, I dinna ken right now, but my SWAG is
    not so well.

    Kevin Bowling wrote:
    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a-a I'm being lured in with the videos about making LOTS of money by >>>>> repairing PS/2s... ;)

    -a-a My soldering sucks, but not anything to do with solder sucking >>>>> or solder braid.

    -a-a I lack the deft touch of Dr. Jim Shorney. My bedside manner is >>>>> atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that
    suggest a solder iron and desoldering braid will do me, but past
    failed attempts don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey.-a Ranging from
    an MBT and dedicated hot air station to the mil depot level repair
    PRC 2000 system.-a I would keep a search for a reasonably complete
    MBT and add a dedicated hot air station.

    Yeah hold on to that, it is a good soldering station. You can buy new "SensaTemp" tools to use with it. SX-100 extractor and some tweezers
    might be desirable additions depending on what needs doing. You could
    still add a dedicated hot air station later on since you might want to pre-heat some work area.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Louis Ohland@ohland@charter.net to comp.sys.ibm.ps2.hardware on Tue Nov 10 10:48:10 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    I have the SX-70 handpiece... But the SX-100 can use the Pik Tips...
    TT-65 is interesting as well...

    Kevin Bowling wrote:
    On 11/9/26 7:05 PM, Louis Ohland wrote:
    Huh, "Pik Tips" work with the SX-100 handpiece...

    Louis Ohland wrote:
    Also called the "MBT-101"

    Louis Ohland wrote:
    Wendt out on the porch and czeched, I have a PPS-75.

    Where that compares to an MBT, I dinna ken right now, but my SWAG is
    not so well.

    Kevin Bowling wrote:
    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a-a I'm being lured in with the videos about making LOTS of money >>>>>> by repairing PS/2s... ;)

    -a-a My soldering sucks, but not anything to do with solder sucking >>>>>> or solder braid.

    -a-a I lack the deft touch of Dr. Jim Shorney. My bedside manner is >>>>>> atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that
    suggest a solder iron and desoldering braid will do me, but past
    failed attempts don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey.-a Ranging from >>>>> an MBT and dedicated hot air station to the mil depot level repair
    PRC 2000 system.-a I would keep a search for a reasonably complete
    MBT and add a dedicated hot air station.

    Yeah hold on to that, it is a good soldering station.-a You can buy new "SensaTemp" tools to use with it.-a SX-100 extractor and some tweezers
    might be desirable additions depending on what needs doing.-a You could still add a dedicated hot air station later on since you might want to pre-heat some work area.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Kevin Bowling@kevin.bowling@kev009.com to comp.sys.ibm.ps2.hardware on Tue Nov 10 10:56:16 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    On 11/10/26 9:48 AM, Louis Ohland wrote:
    I have the SX-70 handpiece... But the SX-100 can use the Pik Tips...
    TT-65 is interesting as well...

    SX-70 seems like an older version of the same concept. Heated tweezers
    can be nice for particular surface mount passives and such, but you can generally do everything with a normal iron, hot air, and a good
    collection of passive tweezers.

    Kevin Bowling wrote:
    On 11/9/26 7:05 PM, Louis Ohland wrote:
    Huh, "Pik Tips" work with the SX-100 handpiece...

    Louis Ohland wrote:
    Also called the "MBT-101"

    Louis Ohland wrote:
    Wendt out on the porch and czeched, I have a PPS-75.

    Where that compares to an MBT, I dinna ken right now, but my SWAG
    is not so well.

    Kevin Bowling wrote:
    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a-a I'm being lured in with the videos about making LOTS of money >>>>>>> by repairing PS/2s... ;)

    -a-a My soldering sucks, but not anything to do with solder sucking >>>>>>> or solder braid.

    -a-a I lack the deft touch of Dr. Jim Shorney. My bedside manner is >>>>>>> atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that
    suggest a solder iron and desoldering braid will do me, but past >>>>>>> failed attempts don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey.-a Ranging
    from an MBT and dedicated hot air station to the mil depot level
    repair PRC 2000 system.-a I would keep a search for a reasonably
    complete MBT and add a dedicated hot air station.

    Yeah hold on to that, it is a good soldering station.-a You can buy new
    "SensaTemp" tools to use with it.-a SX-100 extractor and some tweezers
    might be desirable additions depending on what needs doing.-a You could
    still add a dedicated hot air station later on since you might want to
    pre-heat some work area.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Louis Ohland@ohland@charter.net to comp.sys.ibm.ps2.hardware on Mon Nov 16 08:05:26 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    Well, things wendt from shady to fugly. The 9585-N sysboard had been the unwilling subject of a novice with hot air rework, noticeable surface discoloration around a number of SCSI-related QFPs. Two places on the underside of the sysboard, showing heat-related discoloration from
    attempted rework on the other side...

    Some residue near a few caps. Not sure what, it is brown tar-like,
    resembles what flux-core leaves. When the Nichicons blew on my 9585-N,
    the spooge didn't even come close to looking like that.

    Replacing caps with a Pace MBT-101, do-able. Picking a QFP, cleaning up
    any spooge or flux residue under it, cleaning off the gull-wing leads,
    and re-soldering the QFP is waaay past what I expected.

    I must meditate.

    Kevin Bowling wrote:
    On 11/10/26 9:48 AM, Louis Ohland wrote:
    I have the SX-70 handpiece... But the SX-100 can use the Pik Tips...
    TT-65 is interesting as well...

    SX-70 seems like an older version of the same concept.-a Heated tweezers
    can be nice for particular surface mount passives and such, but you can generally do everything with a normal iron, hot air, and a good
    collection of passive tweezers.

    Kevin Bowling wrote:
    On 11/9/26 7:05 PM, Louis Ohland wrote:
    Huh, "Pik Tips" work with the SX-100 handpiece...

    Louis Ohland wrote:
    Also called the "MBT-101"

    Louis Ohland wrote:
    Wendt out on the porch and czeched, I have a PPS-75.

    Where that compares to an MBT, I dinna ken right now, but my SWAG >>>>>> is not so well.

    Kevin Bowling wrote:
    On 11/8/26 6:39 PM, Louis Ohland wrote:
    -a-a I'm being lured in with the videos about making LOTS of money >>>>>>>> by repairing PS/2s... ;)

    -a-a My soldering sucks, but not anything to do with solder
    sucking or solder braid.

    -a-a I lack the deft touch of Dr. Jim Shorney. My bedside manner >>>>>>>> is atrocious.

    DIPs, SMDs, and PLCC / QFPs mostly. I do appreciate folks that >>>>>>>> suggest a solder iron and desoldering braid will do me, but past >>>>>>>> failed attempts don't fill me with confidence.

    Non-Red Chinee gear, please!

    If you want to keep it Merica: Pace, but it's pricey.-a Ranging >>>>>>> from an MBT and dedicated hot air station to the mil depot level >>>>>>> repair PRC 2000 system.-a I would keep a search for a reasonably >>>>>>> complete MBT and add a dedicated hot air station.

    Yeah hold on to that, it is a good soldering station.-a You can buy
    new "SensaTemp" tools to use with it.-a SX-100 extractor and some
    tweezers might be desirable additions depending on what needs doing.
    You could still add a dedicated hot air station later on since you
    might want to pre-heat some work area.

    --- Synchronet 3.22a-Linux NewsLink 1.2