• Meditations on the 2-6MB Memory Expansion Adapter

    From Louis Ohland@ohland@charter.net to comp.sys.ibm.ps2.hardware on Fri Nov 6 10:28:12 2026
    From Newsgroup: comp.sys.ibm.ps2.hardware

    Mix of stuff we knew, and details we didn't write down.

    ADF is @FAFF.ADF, refreshingly SIMMple:

    AdapterID 0FAFFh
    AdapterName "Memory Expansion Adapter"
    Numbytes 4
    sysmem 1024 32

    Memory granularity is 1MB [system disables bad mem in 1MB increments]
    and memory access is 32-bits wide.

    Further configuration details in the CFAFF.ADF, which I'm not able to decipher. HxD shows no human-readable text other than the IBM copyright.

    There are two versions of the FAFF 2-6MB Memory Expansion Adapter

    Card with 90X9482 next to blue card guide towards from of the system.
    All micro channel edgecard positions are filled. Card marked as "RAM
    Expansion Card" Mfr date of '87?

    Card with 90X9507 next to blue card guide towards from of the system.
    Some of the micro channel edgecard positions are filled. Card marked as "Memory Expansion Option" Mfr date of '88-'91?

    From your base card:
    Silkscreened: IBM FRU 72X6671
    Printed with white ink: 90X9507
    Raw Card P/N 90X9406

    Daughtercard:
    Raw Card P/N 72X7058
    FRU 90X9507

    IBM used a parts system where numbers changed for reasons including fab changes, ECAs, process changes, hiding things from other IBM divisions,
    or use with newer or different systems. Option is the complete adapter + memory, a Field Replaceable Unit [FRU] would be a replacement part.

    You have to dig in IBM manuels to findt where a number came from.

    2-6MB Memory Expansion Adapter
    Option: 6450372 FRU: 72X6671

    2MB Memory card for 2-6MB Memory Expansion Adapter
    Option: 6450372 FRU: 72X6672

    These OPT and FRUs make sense, you ordered the adapter + 2MB memoir with option 6450372, to order separate 2MB memory cards, you ordered the FRU 72X6672

    There isn't much on the base card other than SIMMple logic ICs, pulse correction, resistor networks, and FOUR GAL/PALs from MMI:

    72X7507
    72X7508
    72X7509
    90X9323 [small little guy]

    none of which seems to be on any 8580 sysboard. My SWAG is primitive
    glue logic sufficient to act as a memory slave, but little else.

    The micro channel edgecard resembles a meth addict's smile, lots of
    missing contacts. It is a 32-bit card, but I'd have to figure out the
    existing contacts to be sure of the card's possumble capabilities.

    Not sure if it uses the MME. MME would be usable on the 16MHz Type 1 systemboard, but not the 20 and 25 MHz sysboards.

    All-in-all, a nice exercise in untangling an IBM adapter. No definite
    answer, just a closer approximation of the truth...
    --- Synchronet 3.22a-Linux NewsLink 1.2