To get pCloud to work with the WebDAV protocol in LanMan98, V3.08 I
had to use the US link - the EU one fails. This might help save time
for anyone trying to follow the pCloud instructions. Good to be able
to access pCloud in RISC OS.
In message <5d2be8729dbasura@invalid.addr.uk> Richard Ashbery
<basura@invalid.addr.uk> wrote:
To get pCloud to work with the WebDAV protocol in LanMan98, V3.08
I had to use the US link - the EU one fails. This might help save
time for anyone trying to follow the pCloud instructions. Good to
be able to access pCloud in RISC OS.
This could be due to the worldwide issue with any sites that used
PHP within their sites. Lots of sites have been down for urgent
security patching.
You could be right Chris but have taken a look at pCloud's
instructions on using WebDAV and rsync and in both cases the European
option is greyed out. Surely they wouldn't do this without an
explanation.
On 23 Oct, Richard Ashbery <basura@invalid.addr.uk> wrote:
You could be right Chris but have taken a look at pCloud's
instructions on using WebDAV and rsync and in both cases the European
option is greyed out. Surely they wouldn't do this without an
explanation.
Perhaps the site thinks you are in the USA?
Try a Whois lookup on your router's external IP address, or use https://whatismyipaddress.com and click on the link in the middle of the
page to find what your IP address's full details are. Locations are not necessarily accurate - it says I'm in Chester, which I'm not, although I
have been there.
To get pCloud to work with the WebDAV protocol in LanMan98, V3.08 I
had to use the US link - the EU one fails. This might help save time
for anyone trying to follow the pCloud instructions. Good to be able
to access pCloud in RISC OS.
In article <5d2be8729dbasura@invalid.addr.uk>,
Richard Ashbery <basura@invalid.addr.uk> wrote:
To get pCloud to work with the WebDAV protocol in LanMan98, V3.08 I
had to use the US link - the EU one fails. This might help save time
for anyone trying to follow the pCloud instructions. Good to be able
to access pCloud in RISC OS.
This sounds promising, having pCloud was always a great solution for
getting files across. It's also the only reason why I still have my pCloud account.
Must admit I haven't used LanMan98 for quite some time so maybe I'm
missing something obvious here? Downladed LM98-v300 beta and updated my existing installation. It doesn't seem to do anything though. At least it doesn't appear on the iconbar.
Is this some sort of collision with Omni? Both live on my AppDock but LanMan98 won't open it seems.
In message <5d349b745aminim@news.invalid>
Patric <minim@news.invalid> wrote:
In article <5d2be8729dbasura@invalid.addr.uk>,
Richard Ashbery <basura@invalid.addr.uk> wrote:
To get pCloud to work with the WebDAV protocol in LanMan98, V3.08 I
had to use the US link - the EU one fails. This might help save time
for anyone trying to follow the pCloud instructions. Good to be able
to access pCloud in RISC OS.
Must admit I haven't used LanMan98 for quite some time so maybe I'm
missing something obvious here? Downladed LM98-v300 beta and updated my existing installation. It doesn't seem to do anything though.
At least it doesn't appear on the iconbar.
Is this some sort of collision with Omni? Both live on my AppDock but LanMan98 won't open it seems.
You can either use LanMan98 with Omni or use LanMan98 standalone without using Omni (which is the way I use it).
If you want to use LanMan98 with Omni then you need to use OmniPlugin version of LanMan98. If you have downloaded the Lanman98 beta19a.zip
file within it is a folder called OmniPlugin and within that is the
version of LanMan98 that is set to work with Omni.
Also read the pCloud and WebDAV files how to connect to your pCloud
account.
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 76 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 57:39:52 |
| Calls: | 1,265 |
| Calls today: | 1 |
| Files: | 1,362 |
| D/L today: |
4 files (9,632K bytes) |
| Messages: | 285,926 |