1. Forum
  2. USENET
  3. comp.sys.acorn.hardware

  • Printing on new computer

    From Alan Adams@alan@adamshome.org.uk to comp.sys.acorn.hardware on Sun Jan 4 17:15:03 2026
    From Newsgroup: comp.sys.acorn.hardware

    Hi

    I'm trying to set up the printers on a new RISC OS computer, to match the
    ones I used on my ARMX6. Both use RO5.

    I used !PS3, ps_duplex, and the lpr module.

    I've managed to set up the first one which prints correctly from Ovation
    Pro, but StrongED produces a series of Wimp error messages "Cannot print specified string", then freezes, needing alt-break to recover.

    Any thoughts?
    --
    Alan Adams
    --- Synchronet 3.21a-Linux NewsLink 1.2
  • From Chris Hughes@lists@noonehere.co.uk to comp.sys.acorn.hardware on Sun Jan 4 18:07:07 2026
    From Newsgroup: comp.sys.acorn.hardware

    In message <dcf1fe955c.Alan@alan.adamshome.org.uk>
    Alan Adams <alan@adamshome.org.uk> wrote:

    Hi

    I'm trying to set up the printers on a new RISC OS computer, to match the ones I used on my ARMX6. Both use RO5.

    I used !PS3, ps_duplex, and the lpr module.

    I've managed to set up the first one which prints correctly from Ovation
    Pro, but StrongED produces a series of Wimp error messages "Cannot print specified string", then freezes, needing alt-break to recover.

    Any thoughts?

    Why not just transfer your settings/software from the old computer to the
    new ones.
    --
    Chris Hughes
    --- Synchronet 3.21a-Linux NewsLink 1.2
  • From Alan Adams@alan@adamshome.org.uk to comp.sys.acorn.hardware on Sun Jan 4 19:45:07 2026
    From Newsgroup: comp.sys.acorn.hardware

    In message <56b704965c.chris@mytardis>
    Chris Hughes <lists@noonehere.co.uk> wrote:

    In message <dcf1fe955c.Alan@alan.adamshome.org.uk>
    Alan Adams <alan@adamshome.org.uk> wrote:

    Hi

    I'm trying to set up the printers on a new RISC OS computer, to match the
    ones I used on my ARMX6. Both use RO5.

    I used !PS3, ps_duplex, and the lpr module.

    I've managed to set up the first one which prints correctly from Ovation
    Pro, but StrongED produces a series of Wimp error messages "Cannot print
    specified string", then freezes, needing alt-break to recover.

    Any thoughts?

    Why not just transfer your settings/software from the old computer to the
    new ones.

    When I tried that I kept getting error messages when !Printers started.

    The weird thing is having OPro working and StrongED not working with the printer.
    --
    Alan Adams
    --- Synchronet 3.21a-Linux NewsLink 1.2
  • From Alan Adams@alan@adamshome.org.uk to comp.sys.acorn.hardware on Sun Jan 4 21:45:04 2026
    From Newsgroup: comp.sys.acorn.hardware

    In message <35380b965c.Alan@alan.adamshome.org.uk>
    Alan Adams <alan@adamshome.org.uk> wrote:

    In message <56b704965c.chris@mytardis>
    Chris Hughes <lists@noonehere.co.uk> wrote:

    In message <dcf1fe955c.Alan@alan.adamshome.org.uk>
    Alan Adams <alan@adamshome.org.uk> wrote:

    Hi

    I'm trying to set up the printers on a new RISC OS computer, to match the >>> ones I used on my ARMX6. Both use RO5.

    I used !PS3, ps_duplex, and the lpr module.

    I've managed to set up the first one which prints correctly from Ovation >>> Pro, but StrongED produces a series of Wimp error messages "Cannot print >>> specified string", then freezes, needing alt-break to recover.

    Any thoughts?

    Why not just transfer your settings/software from the old computer to the
    new ones.

    When I tried that I kept getting error messages when !Printers started.

    The weird thing is having OPro working and StrongED not working with the printer.

    Turns out StrongED 4.69 works. The new computer was shipped with SE 4.70, which fails.
    --
    Alan Adams
    --- Synchronet 3.21a-Linux NewsLink 1.2