• Ovation Pro - Enter key causes caret to go forward a whole page

    From Brian Jordan@brian.jordan9@btinternet.com to comp.sys.acorn.apps on Wed Oct 28 03:30:52 2026
    From Newsgroup: comp.sys.acorn.apps

    The subject says it all really.
    I broke out OPro this evening and it has become unuseable because the
    caret advances the document by a whole page when I press the Enter key. I
    was using it last week without this issue so I assume I have downloaded
    or updated something although, despite searching, I can't think what?
    Any help would be appreciated.
    B
    --
    _____________________________________________________________________

    Brian Jordan
    brian.jordan9@btinternet.com
    RISC OS 5.30 (27-Apr-24) on Raspberry Pi _____________________________________________________________________

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Chris Hughes@news13@noonehere.co.uk to comp.sys.acorn.apps on Wed Oct 28 08:56:10 2026
    From Newsgroup: comp.sys.acorn.apps

    In message <5d2ea7c472brian.jordan9@btinternet.com>
    Brian Jordan <brian.jordan9@btinternet.com> wrote:

    The subject says it all really.
    I broke out OPro this evening and it has become unuseable because the
    caret advances the document by a whole page when I press the Enter key. I
    was using it last week without this issue so I assume I have downloaded
    or updated something although, despite searching, I can't think what?
    Any help would be appreciated.
    B

    Could be a sticky key maybe....

    You might be better asking this question on the OvationPro mailing list.
    --
    Chris Hughes
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul Sprangers@Paul@sprie.nl to comp.sys.acorn.apps on Wed Oct 28 13:38:08 2026
    From Newsgroup: comp.sys.acorn.apps

    In article <5d2ea7c472brian.jordan9@btinternet.com>,
    Brian Jordan <brian.jordan9@btinternet.com> wrote:

    the caret advances the document by a whole page when I press the Enter
    key

    Perhaps the caret is in a small repeated frame, a header for example?

    Paul
    --
    https://riscos.sprie.nl
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Brian Jordan@brian.jordan9@btinternet.com to comp.sys.acorn.apps on Wed Oct 28 14:43:04 2026
    From Newsgroup: comp.sys.acorn.apps

    In article <5d2ed46083Paul@sprie.nl>,
    Paul Sprangers <Paul@sprie.nl> wrote:
    In article <5d2ea7c472brian.jordan9@btinternet.com>,
    Brian Jordan <brian.jordan9@btinternet.com> wrote:

    the caret advances the document by a whole page when I press the Enter
    key

    Perhaps the caret is in a small repeated frame, a header for example?

    It seems to be an OPro specific problem on this machine, I am a regular
    user and this has appeared since I was using it last weekend.
    I load a fresh OPro and click on the Iconbar icon which, as always, opens
    a new document with a flashing cursor at the top left. As soon as I hit
    the enter key (with or without typing anything) the cursor jumps to the
    top of the next, newly created, page. Similarly, if I load the document I
    was editing at the weekend any use of the enter key generates a new page
    with the cursor in it.
    This doesn't seem to be a hardware issue as I can type in any other
    document e.g this reply in PLuto, without any problems.
    B
    --
    _____________________________________________________________________

    Brian Jordan
    brian.jordan9@btinternet.com
    RISC OS 5.30 (27-Apr-24) on Raspberry Pi _____________________________________________________________________

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Harriet Bazley@harriet@bazleyfamily.co.uk to comp.sys.acorn.apps on Thu Oct 29 01:54:30 2026
    From Newsgroup: comp.sys.acorn.apps

    On 28 Oct 2026 as I do recall,
    Brian Jordan wrote:

    [snip]

    I load a fresh OPro and click on the Iconbar icon which, as always, opens
    a new document with a flashing cursor at the top left. As soon as I hit
    the enter key (with or without typing anything) the cursor jumps to the
    top of the next, newly created, page. Similarly, if I load the document I
    was editing at the weekend any use of the enter key generates a new page
    with the cursor in it.

    Is it possible that you have somehow changed the definition of the
    default style to have an extremely large spacing below paragraphs, or to
    always start at the top of a new page, or something similar? Or
    accidentally bound a macro of some sort to the Enter key?

    What happens if you do Shift-Enter, or use the Enter key on the numeric
    keypad?
    --
    Harriet Bazley == Loyaulte me lie ==

    Sir Francis Drake circumcised the world with a 100-foot clipper.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From bernard@bernard@boase.myzen.co.uk to comp.sys.acorn.apps on Thu Oct 29 11:46:14 2026
    From Newsgroup: comp.sys.acorn.apps

    On 28 Oct 2026, brian.jordan9@btinternet.com wrote:

    I load a fresh OPro and click on the Iconbar icon which, as always, opens
    a new document with a flashing cursor at the top left. As soon as I hit
    the enter key (with or without typing anything) the cursor jumps to the
    top of the next, newly created, page. Similarly, if I load the document I
    was editing at the weekend any use of the enter key generates a new page
    with the cursor in it.

    Ovation Pro manual Chapter 3, page 22 'Force Page Break' says:
    "You can force a page break in the default master frame at any time by pressing Ctrl P (or by pressing Enter on the keypad or ..."

    And the same applies in the document itself (page 23, 'New page'), though
    that reference fails to mention it's Enter on the keypad.

    This distinguishes the functions of the (numeric) keypad Enter key from
    the main keyboard's Return key (sometimes also labelled Enter). If you get
    the new page effect from the latter, perhaps there's a key remapping
    defined during boot that equates low-level internal key number 71 (Return) with key number103 (keypad Enter)?

    If your keyboard has no keypad, then there has to be an error in the key mapping of the Return key.

    Bernard
    --
    b.boase@bcs.org
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Brian Jordan@brian.jordan9@btinternet.com to comp.sys.acorn.apps on Thu Oct 29 23:34:13 2026
    From Newsgroup: comp.sys.acorn.apps

    In article <9ef4582f5d.boase@bernard>,
    <bernard@boase.myzen.co.uk> wrote:
    On 28 Oct 2026, brian.jordan9@btinternet.com wrote:
    Thank you Bernard (and evertone else who replied)

    [Snip details of my problem]

    Ovation Pro manual Chapter 3, page 22 'Force Page Break' says: "You can
    force a page break in the default master frame at any time by pressing
    Ctrl P (or by pressing Enter on the keypad or ..."

    And the same applies in the document itself (page 23, 'New page'),
    though that reference fails to mention it's Enter on the keypad.

    This distinguishes the functions of the (numeric) keypad Enter key from
    the main keyboard's Return key (sometimes also labelled Enter). If you
    get the new page effect from the latter, perhaps there's a key
    remapping defined during boot that equates low-level internal key
    number 71 (Return) with key number103 (keypad Enter)?

    If your keyboard has no keypad, then there has to be an error in the
    key mapping of the Return key.

    You have hit the nail on the head!
    In brief this is a brain mapping issue rather than a key mapping issue. I
    have recently been using a complex bit of design software under Windows
    in connection with my 3D printing hobby. In this software the two Enter
    keys are used interchangeably and when required hitting the keypad Enter
    key has become a habit. When I came back to Ovation Pro I didn't remember
    the distinction and became too readily alarmed by the behaviour I have described.
    I panicked and posted here rather than taking time to look at the manual
    - sorry to all for wasting your time.
    B
    --
    _____________________________________________________________________

    Brian Jordan
    brian.jordan9@btinternet.com
    RISC OS 5.30 (27-Apr-24) on Raspberry Pi _____________________________________________________________________

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Dave@dave@triffid.co.uk to comp.sys.acorn.apps on Fri Oct 30 08:02:14 2026
    From Newsgroup: comp.sys.acorn.apps

    In article <5d2f99c600brian.jordan9@btinternet.com>,
    Brian Jordan <brian.jordan9@btinternet.com> wrote:
    In article <9ef4582f5d.boase@bernard>,
    <bernard@boase.myzen.co.uk> wrote:
    On 28 Oct 2026, brian.jordan9@btinternet.com wrote:
    Thank you Bernard (and evertone else who replied)

    [Snip details of my problem]

    Ovation Pro manual Chapter 3, page 22 'Force Page Break' says: "You can force a page break in the default master frame at any time by pressing
    Ctrl P (or by pressing Enter on the keypad or ..."

    And the same applies in the document itself (page 23, 'New page'),
    though that reference fails to mention it's Enter on the keypad.

    This distinguishes the functions of the (numeric) keypad Enter key from
    the main keyboard's Return key (sometimes also labelled Enter). If you
    get the new page effect from the latter, perhaps there's a key
    remapping defined during boot that equates low-level internal key
    number 71 (Return) with key number103 (keypad Enter)?

    If your keyboard has no keypad, then there has to be an error in the
    key mapping of the Return key.

    You have hit the nail on the head!
    In brief this is a brain mapping issue rather than a key mapping issue. I have recently been using a complex bit of design software under Windows
    in connection with my 3D printing hobby. In this software the two Enter
    keys are used interchangeably and when required hitting the keypad Enter
    key has become a habit. When I came back to Ovation Pro I didn't remember
    the distinction and became too readily alarmed by the behaviour I have described.
    I panicked and posted here rather than taking time to look at the manual
    - sorry to all for wasting your time.
    B

    However, it has been a useful exercise in learning for those of us who
    still use OvPro both here on RISC OS and on the Win side. :-)

    Dave
    --

    Dave Triffid
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Brian Jordan@brian.jordan9@btinternet.com to comp.sys.acorn.apps on Fri Oct 30 11:37:16 2026
    From Newsgroup: comp.sys.acorn.apps

    In article <5d2fc847d4dave@triffid.co.uk>,
    Dave <dave@triffid.co.uk> wrote:
    In article <5d2f99c600brian.jordan9@btinternet.com>,
    Brian Jordan <brian.jordan9@btinternet.com> wrote:
    In article <9ef4582f5d.boase@bernard>,
    <bernard@boase.myzen.co.uk> wrote:
    On 28 Oct 2026, brian.jordan9@btinternet.com wrote:
    Thank you Bernard (and evertone else who replied)

    [Snip]

    However, it has been a useful exercise in learning for those of us who
    still use OvPro both here on RISC OS and on the Win side. :-)

    Too kind ;-)
    --
    _____________________________________________________________________

    Brian Jordan
    brian.jordan9@btinternet.com
    RISC OS 5.30 (27-Apr-24) on Raspberry Pi _____________________________________________________________________

    --- Synchronet 3.22a-Linux NewsLink 1.2