I apologise for the long delay in sending this message but after many thousands of hours work a significant range of APDL software is now available from:
https://www.riscos.com/apdl
So we invite readers to pop along to the new APDL and see if there is something you would like from the 46 currently available titles (some
are compilations which include several applications bundled together as
one download).
On 12 Oct 2026 as I do recall,You can drag it on iconbar SparkFS
VirtualAcorn wrote:
I apologise for the long delay in sending this message but after many
thousands of hours work a significant range of APDL software is now
available from:
https://www.riscos.com/apdl
[snip]
So we invite readers to pop along to the new APDL and see if there is
something you would like from the 46 currently available titles (some
are compilations which include several applications bundled together as
one download).
I tried NightSky, which sounded interesting - I'm assuming the site uses
some filename protocol which is not supported by NetSurf, because the download link simply gave me a data file called 'download/php".
Renaming that and setting the filetype to Zip allowed me to 'install'It' an old program for Risc 2.00
the application, which produced a copy in the specified destination directory, but I wasn't able to get it actually to run even after
changing into a 256-colour desktop mode; I just get "Not enough memory
to create sprite" errors, presumably because there is *too much* free
memory rather than not enough.
I tried running NightSky under Aemulor in order to limit the available
memory visible to it, but that just gave me "Abort on data transfer"
errors. :-(
Renaming that and setting the filetype to Zip allowed me to 'install'It' an old program for Risc 2.00
the application, which produced a copy in the specified destination directory, but I wasn't able to get it actually to run even after
changing into a 256-colour desktop mode; I just get "Not enough memory
to create sprite" errors, presumably because there is *too much* free memory rather than not enough.
I apologise for the long delay in sending this message but after many thousands of hours work a significant range of APDL software is now
available from:
https://www.riscos.com/apdl
On 12 Oct, VirtualAcorn <atimbrell@aol.com> wrote:
I apologise for the long delay in sending this message but after many thousands of hours work a significant range of APDL software is now available from:
https://www.riscos.com/apdl
I downloaded a new copy of EasyFontPro to try updating my current
version (5.18) but the new(?) version errors when trying to run it.
Not sure what version I have downloaded - a useful idea would be to show version numbers of the software on the site.
These are the errors from the last 3 attempts to run it:
14 Oct 00:01:50 003 00000000: Error outside EasyFont#Pro: Internal
error: undefined instruction at &20313B68 : internal error code : 7 14
Oct 00:01:54 003 00000000: Error outside EasyFont#Pro: Internal error: undefined instruction at &20326188 : internal error code : 7 14 Oct
22:13:02 003 00000000: Error outside EasyFont#Pro: Internal error:
undefined instruction at &20313A28 : internal error code : 7
As you can see, the location of the undefined instruction varies:
*where &20313B68 Address &20313B68 is at offset &00313B68 in dynamic
area 'Module area' *where &20326188 Address &20326188 is at offset
&00326188 in dynamic area 'Module area' *where &20313A28 Address
&20313A28 is at offset &00313A28 in dynamic area 'Module area'
Using RO 5.21 on N.Ex.T Machine from R-Comp.
On 14 Oct 2026 as I do recall,
Jean-Michel wrote:
Renaming that and setting the filetype to Zip allowed me to 'install'It' an old program for Risc 2.00
the application, which produced a copy in the specified destination
directory, but I wasn't able to get it actually to run even after
changing into a 256-colour desktop mode; I just get "Not enough memory
to create sprite" errors, presumably because there is *too much* free
memory rather than not enough.
The help file in the app itself says that "We now assume all users have
Risc Os 3.10 or greater" and "This version is compatible with RISC OS
4" while warning you that you will need to change down to a 256-colour
mode - it doesn't say anything about RISC OS 5, of course....
On 12 Oct, VirtualAcorn <atimbrell@aol.com> wrote:
I apologise for the long delay in sending this message but after many
thousands of hours work a significant range of APDL software is now
available from:
https://www.riscos.com/apdl
I downloaded a new copy of EasyFontPro to try updating my current version (5.18) but the new(?) version errors when trying to run it.
Not sure what version I have downloaded - a useful idea would be to show version numbers of the software on the site.
These are the errors from the last 3 attempts to run it:
14 Oct 00:01:50 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20313B68 : internal error code : 7
14 Oct 00:01:54 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20326188 : internal error code : 7
14 Oct 22:13:02 003 00000000: Error outside EasyFont?Pro: Internal error: undefined instruction at &20313A28 : internal error code : 7
As you can see, the location of the undefined instruction varies:
*where &20313B68
Address &20313B68 is at offset &00313B68 in dynamic area 'Module area'
*where &20326188
Address &20326188 is at offset &00326188 in dynamic area 'Module area'
*where &20313A28
Address &20313A28 is at offset &00313A28 in dynamic area 'Module area'
Using RO 5.21 on N.Ex.T Machine from R-Comp.
!RunImage is not compatible with CM4 processor.
I had to make some "corrections" to make it compatible. https://jeanmichelb.riscos.fr/Temp/EasyProRunImage.zip
I am interested in knowing if the software is completely functional, the license remains with APDL
On 15 Oct, Jean-Michel <jmc.bruck@orange.fr> wrote:
!RunImage is not compatible with CM4 processor.
I had to make some "corrections" to make it compatible.
https://jeanmichelb.riscos.fr/Temp/EasyProRunImage.zip
I am interested in knowing if the software is completely functional, the
license remains with APDL
Still not working here, but a different error:
15 Oct 21:58:56 003 00000000: Error outside EasyFont?Pro: Internal error: abort on instruction fetch at &21D46C88 : internal error code : 8
*where &21D46C88
Address &21D46C88 is at offset &01D46C88 in dynamic area 'Module area'
In message <393656285d.BrianNews@brianhowlett.me.uk>
Brian Howlett <news-spamtrap@brianhowlett.me.uk> wrote:
On 15 Oct, Jean-Michel <jmc.bruck@orange.fr> wrote:
!RunImage is not compatible with CM4 processor.
I had to make some "corrections" to make it compatible.
https://jeanmichelb.riscos.fr/Temp/EasyProRunImage.zip
I am interested in knowing if the software is completely functional,
the license remains with APDL
Still not working here, but a different error:
15 Oct 21:58:56 003 00000000: Error outside EasyFont?Pro: Internal
error: abort on instruction fetch at &21D46C88 : internal error code :
8
*where &21D46C88 Address &21D46C88 is at offset &01D46C88 in dynamic
area 'Module area'
On my machine the program launches and I get the application window, but
I admit that I haven't done any other tests. The manual is displayed correctly.
I will continue testing, with an ARMx6 it seems to me that it works correctly. Maybe you can also update the OS => 5.31
Thanks for testing.
FWIW. I tried your new Runimage on my RPCEmu 0.9.4 and RISC OS 5.31
and it still errored out...
From Reporter:
14:54:35.24 [WindowManager/] Obey HostFS::HostFS.$.TransDir.!EasyPro.!Run 14:54:35.76 ** Error **
Error : &80000001
Message: Internal error: abort on instruction fetch at &21C56CE8 14:54:35.76 ** WimpError ** from Error outside EasyFont Pro
Error : &00000000
Message: Internal error: abort on instruction fetch at &21C56CE8 :
internal error code : 8
14:55:18.14 TaskClose &7EE03A1C
14:55:18.14 TaskInit &7EE03A1C EasyFont Pro CAO FC1801E0
Slot 800K
In article <5d28b38762dave@triffid.co.uk>,
Dave <dave@triffid.co.uk> wrote:
[Snip]
FWIW. I tried your new Runimage on my RPCEmu 0.9.4 and RISC OS 5.31
and it still errored out...
From Reporter:
14:54:35.24 [WindowManager/] Obey
HostFS::HostFS.$.TransDir.!EasyPro.!Run 14:54:35.76 ** Error **
Error : &80000001
Message: Internal error: abort on instruction fetch at &21C56CE8 14:54:35.76 ** WimpError ** from Error outside EasyFont Pro
Error : &00000000
Message: Internal error: abort on instruction fetch at &21C56CE8 : internal error code : 8
14:55:18.14 TaskClose &7EE03A1C
14:55:18.14 TaskInit &7EE03A1C EasyFont Pro CAO FC1801E0
Slot 800K
What then does *ReportWhere say? (command or menu)
That will try to identify a module and an offset, and register values,
if it can.
In article <5d28b755fdNews04@avisoft.f9.co.uk>,
Martin <News04@avisoft.f9.co.uk> wrote:
In article <5d28b38762dave@triffid.co.uk>,
Dave <dave@triffid.co.uk> wrote:
[Snip]
FWIW. I tried your new Runimage on my RPCEmu 0.9.4 and RISC OS 5.31
and it still errored out...
From Reporter:
14:54:35.24 [WindowManager/] Obey
HostFS::HostFS.$.TransDir.!EasyPro.!Run 14:54:35.76 ** Error **
Error : &80000001
Message: Internal error: abort on instruction fetch at &21C56CE8 14:54:35.76 ** WimpError ** from Error outside EasyFont Pro
Error : &00000000
Message: Internal error: abort on instruction fetch at &21C56CE8 : internal error code : 8
14:55:18.14 TaskClose &7EE03A1C
14:55:18.14 TaskInit &7EE03A1C EasyFont Pro CAO FC1801E0
Slot 800K
What then does *ReportWhere say? (command or menu)
That will try to identify a module and an offset, and register values,
if it can.
Is this what you mean?
Dave
Reporter 2.74 (01 Aug 2021) List Fri 16th Oct 2026 19:59
19:58:25.26 ** Clear ** from Menu
19:58:33.91 TaskClose &7CE03A1C
19:58:33.91 [WindowManager/] Obey HostFS::HostFS.$.TransDir.!EasyPro.!Run 19:58:34.59 ** Error **
Error : &80000001
Message: Internal error: abort on instruction fetch at &21C58A68 19:58:34.59 ** WimpError ** from Error outside EasyFont Pro
Error : &00000000
Message: Internal error: abort on instruction fetch at &21C58A68 :
internal error code : 8
19:58:37.97 TaskClose &7D003A1C
19:58:37.98 TaskInit &7D003A1C EasyFont Pro CAO FC1801E0 Slot
800K
Address &21C58A6C is not in any module.
Register dump (at &2000D2F0) is:
pc = &21C58A6C Flags=&20000010=nzCv if Mode=User 32 bit
r0 = &00041000 : .... : 266240
r1 = &0008F000 : .E.. : 585728
r2 = &A17EBE6C : l+~i : 2709438060
r3 = &08353285 : a25. : 137704069
r4 = &CF1F01D1 : -..- : 3474915793
r5 = &00000001 : .... : 1
r6 = &F2CBB46F : o|-> : 4073436271
r7 = &00000298 : y... : 664 => &FC009BB4 : |c.n : 4227898292
r8 = &00008700 : .c.. : 34560
r9 = &00040FD8 : +... : 266200
r10 = &00000000 : .... : 0 => &E59FF488 : erfo : 3852465288
r11 = &00008100 : .U.. : 33024
r12 = &00009033 : 3E.. : 36915
r13 = &00040FC0 : +... : 266176
r14 = &FC1894E0 : ao.n : 4229469408 => &EAFFFFF5 : j..n : 3942645749
Code around address is:
21C58A34 : Invalid address
Reporter 2.74 (01 Aug 2021) Listed 31 lines
Reporter 2.74 (01 Aug 2021) Listed 31 lines
That is what I meant ... but it just indicates that something
originating in BASIC has made a wild branch into something that is not
code, and certainly not a module. So no direct help, I am afraid.
In message <5d28e1f379News04@avisoft.f9.co.uk>
Martin <News04@avisoft.f9.co.uk> wrote:
That is what I meant ... but it just indicates that something
originating in BASIC has made a wild branch into something that
is not code, and certainly not a module. So no direct help, I am
afraid.
Yes, Martin you are right, the program is largely in Basic, I am
trying to make it work, but it is not easy, because you must not
forget anything... I test and correct. The !RunImage provided is
not correct, although it loads correctly, it crashes very easily.
In article <eb1a1a295d.jmb@jmc.bruck.orange.fr>,
Jean-Michel <jmc.bruck@orange.fr> wrote:
In message <5d28e1f379News04@avisoft.f9.co.uk>
Martin <News04@avisoft.f9.co.uk> wrote:
Re EasyFontPro problems
That is what I meant ... but it just indicates that something
originating in BASIC has made a wild branch into something that
is not code, and certainly not a module. So no direct help, I am
afraid.
Yes, Martin you are right, the program is largely in Basic, I am
trying to make it work, but it is not easy, because you must not
forget anything... I test and correct. The !RunImage provided is
not correct, although it loads correctly, it crashes very easily.
I looked in detail at EFP way back in 2012, trying to resolve some
problems I had found. I discovered quite a number of issues
inconsistencies, and made over 30 changes in both the BASIC and the
modules, but never managed to report them to David Holden
unfortunately, so I stopped the work.
https://www.riscos.com/apdl
I tried NightSky, which sounded interesting - I'm assuming the site uses
some filename protocol which is not supported by NetSurf, because the download link simply gave me a data file called 'download/php".
On 13 Oct 2026, harriet@bazleyfamily.co.uk wrote:
https://www.riscos.com/apdl
I tried NightSky, which sounded interesting - I'm assuming the site uses
some filename protocol which is not supported by NetSurf, because the
download link simply gave me a data file called 'download/php".
By the way, a downloaded file like that just has to be dragged to
SparkFS's icon bar icon since SparkFS will recognise that it can be
unzipped, and does so.
I do wonder if the APDL collection has undergone any testing on current systems. Any need for Aemulor or a particular version of the OS (for
example) isn't mentioned, is it?
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 76 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 56:59:05 |
| Calls: | 1,265 |
| Calls today: | 1 |
| Files: | 1,362 |
| D/L today: |
4 files (9,632K bytes) |
| Messages: | 285,828 |