1. Forum
  2. USENET
  3. comp.sys.acorn.apps

  • Keymapper

    From Stuart@Spambin@argonet.co.uk to comp.sys.acorn.apps on Wed Aug 26 09:30:05 2026
    From Newsgroup: comp.sys.acorn.apps

    following on from my issues with the Pi failing to work after operation
    of the KVM switch (comp,sys.acorn.hardware), I have purchased a new
    keyboard. This is the Raspberry Pi keyboard sold by the Pi-hut, with
    internal hub to allow connection of my mouse It is nice and small and I've
    been able to find room for it on my desk.

    However, it has no "Break key". I have downloaded Owlart's Keymapper
    config to reassign the "PrtScn/SysRq to be a "Break" key and am wondering
    the best place to save the configuration file. Ideally i want the
    configuration to be set at start-up
    --
    Stuart Winsor

    Tools With A Mission
    sending tools across the world
    http://www.twam.co.uk/
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Sebastian Barthel@naitsabes@freenet.de to comp.sys.acorn.apps on Fri Aug 28 11:07:13 2026
    From Newsgroup: comp.sys.acorn.apps

    Am Wed, 26 Aug 2026 09:30:05 +0000 schrubte der Humanoide Stuart:

    ... , I have purchased a new keyboard. ...

    However, it has no "Break key". I have downloaded Owlart's Keymapper
    config to reassign the "PrtScn/SysRq to be a "Break" key and am
    wondering the best place to save the configuration file. Ideally i want
    the configuration to be set at start-up

    It sounds as if
    !Boot.Choices.Boot.Tasks
    could be a good place to copy it into.
    --- Synchronet 3.22a-Linux NewsLink 1.2