Question:
In Mixfit, is it possible for you to include a From:field to insert a custom from header?
Thanks
Yamn3 Remailer wrote:
Well, I really would like to avoid that, because IIRC then email
messages, sent through the YAMN Mixnet, could land in spam folders,
or in the worst case not delivered at all, depending on the email
provider.
What I can do however, is that I will add in the future (not now)
a supported Reply-To: header, which is then RFC conform and I hope
that YAMN exit remailers will not remove this header.
What you can try out meanwhile, or someone else, is to use Zax's
original YAMN CLI program and create a hand-rolled message, with
a valid Reply-To: header, to see if the message(s) get's delivered,
not only to Usenet m2n's, but real email addresses.
Once confirmed that this is working properly, I will add then
a Reply-To: header to Mixfit at a later date, because I am
currently pretty busy right now with other Nym related things.
BTW. Castor, the Nym Mixnet anonymous email and Usenet client
has a NymX-Mail: header, which is a modern form of Reply-To:,
but the RFC author for RFC conform email/Usenet headers seems
to be MIA, so that NymX-Mail: is currently no official header,
for the Internet, but it will be properly displayed in inboxes.
NymX-Mail is something similar to having a Tor Hidden Service
email inbox for VPS servers, so that the NymX-Mail Nym Mixnet
anonymous email client can then fetch NymX-Mail email messages
via SSH.
HTH!
Best Regards
Ch1fr3punk
On 11/8/2026 3:06 PM, Ch1ffr3punk wrote:
Yamn3 Remailer wrote:
Well, I really would like to avoid that, because IIRC then email
messages, sent through the YAMN Mixnet, could land in spam folders,
or in the worst case not delivered at all, depending on the email
provider.
You are correct about that. Anonymous emails most often do wind up in the recipientrCOs spam folder. IrCOm aware of that.
I asked simply because the yamn2 exit does allow custom From headers, albeit with a disclaimer AFAIK. I wanted to experiment with that.
What I can do however, is that I will add in the future (not now)
a supported Reply-To: header, which is then RFC conform and I hope
that YAMN exit remailers will not remove this header.
What you can try out meanwhile, or someone else, is to use Zax's
original YAMN CLI program and create a hand-rolled message, with
a valid Reply-To: header, to see if the message(s) get's delivered,
not only to Usenet m2n's, but real email addresses.
I wasnrCOt aware of that.
Once confirmed that this is working properly, I will add then
a Reply-To: header to Mixfit at a later date, because I am
currently pretty busy right now with other Nym related things.
BTW. Castor, the Nym Mixnet anonymous email and Usenet client
has a NymX-Mail: header, which is a modern form of Reply-To:,
but the RFC author for RFC conform email/Usenet headers seems
to be MIA, so that NymX-Mail: is currently no official header,
for the Internet, but it will be properly displayed in inboxes.
Castor is excellent! But Castor limits one to be using NymX-Mail. IrCOd gladly run it, but NymX-Mail requires
one to run a mail server on Linux. I donrCOt have that, and yes, thatrCOs my problem. Perhaps some day.
NymX-Mail is something similar to having a Tor Hidden Service
email inbox for VPS servers, so that the NymX-Mail Nym Mixnet
anonymous email client can then fetch NymX-Mail email messages
via SSH.
Lastly, I thought Mixfit could accommodate a From header because: https://yamnweb.virebent.art/ has a From line. I have not tested it, so no idea how well it works.
Thanks for replying!
Yamn3 Remailer wrote:
On 11/8/2026 3:06 PM, Ch1ffr3punk wrote:
Yamn3 Remailer wrote:
Well, I really would like to avoid that, because IIRC then email messages, sent through the YAMN Mixnet, could land in spam folders,
or in the worst case not delivered at all, depending on the email provider.
You are correct about that. Anonymous emails most often do wind up in the recipientrCOs spam folder. IrCOm aware of that.
I asked simply because the yamn2 exit does allow custom From headers, albeit with a disclaimer AFAIK. I wanted to experiment with that.
What I can do however, is that I will add in the future (not now)
a supported Reply-To: header, which is then RFC conform and I hope
that YAMN exit remailers will not remove this header.
What you can try out meanwhile, or someone else, is to use Zax's
original YAMN CLI program and create a hand-rolled message, with
a valid Reply-To: header, to see if the message(s) get's delivered,
not only to Usenet m2n's, but real email addresses.
I wasnrCOt aware of that.
Once confirmed that this is working properly, I will add then
a Reply-To: header to Mixfit at a later date, because I am
currently pretty busy right now with other Nym related things.
BTW. Castor, the Nym Mixnet anonymous email and Usenet client
has a NymX-Mail: header, which is a modern form of Reply-To:,
but the RFC author for RFC conform email/Usenet headers seems
to be MIA, so that NymX-Mail: is currently no official header,
for the Internet, but it will be properly displayed in inboxes.
Castor is excellent! But Castor limits one to be using NymX-Mail. IrCOd gladly run it, but NymX-Mail requires
one to run a mail server on Linux. I donrCOt have that, and yes, thatrCOs my problem. Perhaps some day.
NymX-Mail is something similar to having a Tor Hidden Service
email inbox for VPS servers, so that the NymX-Mail Nym Mixnet
anonymous email client can then fetch NymX-Mail email messages
via SSH.
Lastly, I thought Mixfit could accommodate a From header because: https://yamnweb.virebent.art/ has a From line. I have not tested it, so no idea how well it works.
Thanks for replying!
You're very welcome!
Regarding your concerns about Castor... Castor does not require a NymX-Mail VPS email account! Castor is like Mixfit an anonymous email and Usenet client,
but requires as proxy settings either NymVPN or my upcomming Pollux Nym SOCKS5
client.
However, Castor is no longer available as public GitHub repository, because
I like to distribute it later via other (commercial) channels. Castor now
has a latency checkbox for the Hermes email gateway, which means when ticked emails will stay encrypted in the brand new Hermes latency Mix pool.
This will allow in the future Castor users to have as an option a revolutionary
"Triple-Mix", if they like to do so. :-) The emails will travel then first via
the Nym Mixnet, TLS encrypted, to a public Hermes gateway and then, if choosen
via a YAMN outfile, through the YAMN Mixnet.
The Hermes Mix pool has a latency between 30-60 minutes, which can be changed in the Hermes source code along with the pool size, which is currently 100 messages
while the pool stays in RAM and changes it's password every 24 hrs, so that Hermes
operators can not look into the pool, while the encrypted messages are also padded
so that all anonymous emails have an equal size.
I did that a) to promote the usage of the Nym Mixnet and b) to promote
the YAMN Mixnet, in hope that more people will later run either a Hermes gateway or a YAMN remailer.
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 76 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 59:24:53 |
| Calls: | 1,265 |
| Calls today: | 1 |
| Files: | 1,362 |
| D/L today: |
4 files (9,632K bytes) |
| Messages: | 286,017 |