• Controlling a 2nd machine

    From pinnerite@pinnerite@gmail.com to alt.os.linux.mint on Thu Nov 5 22:10:25 2026
    From Newsgroup: alt.os.linux.mint

    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are
    a bit user-hostile.

    Can anyone offer suggestions? (Not remmina please)

    TIA Alan
    --
    Linux Mint 22.1 kernel version 6.8.0-84-generic Cinnamon 6.4.8
    AMD Ryzen 7 7700, Radeon RX 6600, 32GB DDR5, 2TB SSD, 2TB Barracuda
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.os.linux.mint on Thu Nov 5 18:27:12 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 11/5/2026 5:10 PM, pinnerite wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are
    a bit user-hostile.

    Can anyone offer suggestions? (Not remmina please)

    TIA Alan




    https://en.wikipedia.org/wiki/Remmina

    https://en.wikipedia.org/wiki/Comparison_of_remote_desktop_software

    RFB (VNC)

    VNC was a replacement for just using a vanilla X11 cilent-server setup.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From George@invalid@invalid.invalid to alt.os.linux.mint on Thu Nov 5 23:20:55 2026
    From Newsgroup: alt.os.linux.mint

    On 05/11/2026 22:10, pinnerite wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are
    a bit user-hostile.

    Can anyone offer suggestions? (Not remmina please)

    TIA Alan




    When you say 'prune some of its redundant files', do you mean deleting
    them using a graphical program so that you can see them before removing
    them?

    If so, have you considered using an FTP programme such as FileZilla? To
    use FileZilla, you first need to install an FTP server, such as VSFTP,
    on the target machine.



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From stepore@stepore@be.here.now to alt.os.linux.mint on Thu Nov 5 16:57:38 2026
    From Newsgroup: alt.os.linux.mint

    On 11/5/26 15:10, pinnerite wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.
    If you have ssh enabled, then probably easiest ( no new packages ) just
    to use SFTP protocol in nemo.

    Example:
    sftp://username@192.168.1.50
    sftp://username@yourdomain.com:22
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Dr. Noah Bodie@noah@bodie.not to alt.os.linux.mint on Thu Nov 5 20:16:54 2026
    From Newsgroup: alt.os.linux.mint

    On 2026-11-05 06:10 PM, pinnerite wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    WOW! You have TWO computers?!? I didn't think that was possible for
    anyone to achieve.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Lawrence =?iso-8859-13?q?D=FFOliveiro?=@ldo@nz.invalid to alt.os.linux.mint on Fri Nov 6 00:42:03 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 5 Nov 2026 22:10:25 +0000, pinnerite wrote:

    Hitherto I have accessed monty via ssh but I want to prune some of
    its redundant files using Nemo.

    Does the file manager support remote file access via SSH?

    (E.g. KDE Konqueror, and I think Dolphin as well, do this via
    rCLfish://rCY URLs.)
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From rbowman@bowman@montana.com to alt.os.linux.mint on Fri Nov 6 01:33:48 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 5 Nov 2026 22:10:25 +0000, pinnerite wrote:

    I have two almost identical machines. Both running Mint 22.1 Except the
    2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are
    a bit user-hostile.

    Can anyone offer suggestions? (Not remmina please)

    TIA Alan

    https://tigervnc.org/
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Axel@none@not.here to alt.os.linux.mint on Fri Nov 6 13:04:56 2026
    From Newsgroup: alt.os.linux.mint

    Dr. Noah Bodie wrote:
    On 2026-11-05 06:10 PM, pinnerite wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    WOW! You have TWO computers?!? I didn't think that was possible for
    anyone to achieve.

    I currently use five, linked with an electronic switch using one
    keyboard, mouse, and monitor, and have more than a dozen in total

    HTH
    --
    Linux Mint 22.3

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.os.linux.mint on Thu Nov 5 22:17:47 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 11/5/2026 8:33 PM, rbowman wrote:
    On Thu, 5 Nov 2026 22:10:25 +0000, pinnerite wrote:

    I have two almost identical machines. Both running Mint 22.1 Except the
    2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its
    redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are
    a bit user-hostile.

    Can anyone offer suggestions? (Not remmina please)

    TIA Alan

    https://tigervnc.org/


    A simpler solution, is to power off the headless machine,
    pull the hard drive and cable it up to the Technician Machine,
    then prune the file set. Remembering to use the Popup Boot menu
    on the Technician computer, to boot off the normal disk, keeping
    the headless disk as a data disk.

    Paul

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From George@invalid@invalid.invalid to alt.os.linux.mint on Fri Nov 6 03:35:24 2026
    From Newsgroup: alt.os.linux.mint

    On 05/11/2026 23:20, George wrote:
    On 05/11/2026 22:10, pinnerite wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its
    redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are
    a bit user-hostile.

    Can anyone offer suggestions?-a (Not remmina please)

    TIA Alan



    When you say 'prune some of its redundant files', do you mean deleting
    them using a graphical program so that you can see them before
    removing them?

    If so, have you considered using an FTP programme such as FileZilla?
    To use FileZilla, you first need to install an FTP server, such as
    VSFTP, on the target machine.



    If you are trying to access the other machine from Windows then RPC
    might just be what you want. You can have GUI access to everything om
    your other machine. It's worth a try.

    <https://techwiser.com/what-is-remote-procedure-call-on-windows-complete-guide/>

    There are many videos on YouTube about this.



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Lawrence =?iso-8859-13?q?D=FFOliveiro?=@ldo@nz.invalid to alt.os.linux.mint on Fri Nov 6 04:35:07 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 5 Nov 2026 22:17:47 -0500, Paul wrote:

    A simpler solution, is to power off the headless machine, pull the
    hard drive and cable it up to the Technician Machine, then prune the
    file set.

    Not so simple if it involves disruption to services provided by the
    remote machine ...
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.os.linux.mint on Fri Nov 6 02:19:46 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 11/5/2026 11:35 PM, Lawrence DrCOOliveiro wrote:
    On Thu, 5 Nov 2026 22:17:47 -0500, Paul wrote:

    A simpler solution, is to power off the headless machine, pull the
    hard drive and cable it up to the Technician Machine, then prune the
    file set.

    Not so simple if it involves disruption to services provided by the
    remote machine ...


    Which is a TV recorder. These will be the MythTV machines, one
    for recording from a tuner (the tuner that's hard to compile
    for the next kernel), the other machine presumably runs the
    ten foot screen in the TV room (so you can watch the movie).
    In MythTV terms, one is the front end, the other is the back end.

    Look at the recording schedule, and find a "clean window"
    for maintenance.

    When I set my MythTV up here, I ended up with the front end and
    the back end in the same machine (it was a lot easier to get
    it running that way). That's because, if I watch
    TV here (at all), it's on a computer monitor screen rather
    than a TV set. If all the gubbins are in the same box,
    a few things might be easier to deal with. The design is
    intended to run in two boxes, and if you spend enough time
    racking your brain to get that working, it will be
    worth it. If you can manage to get all that working,
    you've got enough brain to figure out how to clean
    up that disk :-)

    I've given up before, getting that to work. Getting it
    to play nice with the tuner, after I spent some hours
    on that, my conclusion at the time was "it's just not
    worth it". So it depends on your luck at certain stages.
    Mine this time, was not working, I gave it a reboot,
    and it started working :-) I think you can appreciate
    how some of these behaviors, they won't make a fan out
    of you.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.os.linux.mint on Fri Nov 6 03:18:29 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 11/5/2026 10:35 PM, George wrote:
    On 05/11/2026 23:20, George wrote:
    On 05/11/2026 22:10, pinnerite wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its
    redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are >>> a bit user-hostile.

    Can anyone offer suggestions?-a (Not remmina please)

    TIA Alan



    When you say 'prune some of its redundant files', do you mean deleting them using a graphical program so that you can see them before removing them?

    If so, have you considered using an FTP programme such as FileZilla? To use FileZilla, you first need to install an FTP server, such as VSFTP, on the target machine.



    If you are trying to access the other machine from Windows then RPC might just be what you want. You can have GUI access to everything om your other machine. It's worth a try.

    <https://techwiser.com/what-is-remote-procedure-call-on-windows-complete-guide/>

    There are many videos on YouTube about this.

    You might be thinking of Remote Desktop Connection.
    I use this so seldom, I forget all the details.

    Remote Desktop Connection = The GUI for using it (should be on the Pro machine, at least)
    Remote Desktop Protocol = The protocol used to send the screen and audio, across the net

    You can see an example of a Windows master:Linux slave setup here.

    https://awesun.aweray.com/ca/blog/remote-desktop-connection-for-linux-a-comprehensive-guide-49463

    "Setting Up RDP on Linux

    Install xrdp: On most Linux distributions, you can install xrdp
    using the package manager. For example, on Ubuntu:

    sudo apt update
    sudo apt install xrdp

    Start xrdp Service: After installation, start the xrdp service
    and enable it to start on boot:

    sudo systemctl start xrdp
    sudo systemctl enable xrdp

    Configure Firewall: If you have a firewall enabled, you need to allow incoming RDP connections:

    sudo ufw allow 3389/tcp

    Connect to RDP Server: On the client side, you can use a
    Remote Desktop client to connect to the xrdp server. For example,
    on Windows, you can use the built-in Remote Desktop Connection:

    mstsc /v:<server_ip>

    So that tells you, if your Home/Pro machine had an mstsc.exe, maybe
    this would work, and you could do a Windows master:Linux slave .

    And I do have an mstsc.exe on both Home and Pro, so it's available
    on both Windows flavors. It puts up a little dialog box, so you
    don't absolutely have to start it from the command line on Windows.
    Then you enter the IP address in the box.

    *******

    Remote Procedure Call is for client:server software where
    you look for registered services on a Nameserver. Remote Procedure Calls
    can be done to 127.0.0.1 , so local procedures can call
    one another that way as well. That's also used on more than
    one OS. We had that on our OS, back in the late 80's and I
    suspect we copied it from someone else back then.

    Windows (like most OSes) is so dependent on a functional
    Remote Procedure Call, it cannot be turned off. At one time,
    you could disable such things, or if it died on you
    during a session, the machine would continue to run (sorta)
    until you fixed it. The coupling is so tight now, it's
    used in so many places, it cannot be turned off.

    *******

    In a Linux shop, VNC or one of its variants, is what you
    would likely be using for remoting purposes. It's possible
    that uses tiled updates for the screen. Whereas the X11
    client:server protocol we used to use, it updates primitives
    on the screen. And they tried to make a compression protocol
    for X11, to raise the performance level on our shitty networking back then.

    Running that in the house, you have plenty of bandwidth for
    these things to work. Then it's just a matter of how often
    the various schemes, synchronize the screens.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From yossarian@alt.os.linux.mint on Fri Nov 6 20:40:23 2026
    From Newsgroup: alt.os.linux.mint

    On Thu, 5 Nov 2026 22:10:25 +0000
    pinnerite <pinnerite@gmail.com> wrote:
    I have two almost identical machines. Both running Mint 22.1
    Except the 2nd (called monty) has no screen or keyboard.

    Hitherto I have accessed monty via ssh but I want to prune some of its redundant files using Nemo. Sometime ago I ran a program that could
    handle this graphically but that was on another setup and I cannot
    recall the name of the program. Must be an age thing.

    I have been fiddling about with a couple of programs but the results are
    a bit user-hostile.

    Can anyone offer suggestions? (Not remmina please)

    In nemo file/Connect to server
    Chose SSH, input monty address and folder, user and password.
    press connect
    When connected right click on connected folder and bookmark it
    So for next time you have direct connections without repeating whole process. --
    Linux Mint 22.2 kernel version 6.14.0-36-generic Cinnamon 6.4.8 AMD Ryzen 7 5700G, Radeon RX9060XT, 32GB of DRAM. EUEfc-Efc|.
    --- Synchronet 3.22a-Linux NewsLink 1.2