• Gnome terminal

    From Mike Easter@MikeE@ster.invalid to alt.os.linux.mint on Sat Oct 17 16:31:21 2026
    From Newsgroup: alt.os.linux.mint

    Problem: my display from curl wttr.in/(myzipcode) is messed up; full of additional 'non-printing chars'. Previously it was not, maybe something changed at the wttr.in end, but see below.

    System LM 22.1 Cinnamon; terminal gnome-terminal 3.52 default mode

    Data point: alternate boot live LM 22.1 XFCE default terminal
    xfce4-terminal 1.1.4 default mode. Same command displays properly, no non-printing chars.

    The proper weather report output to the terminal is basically ascii with
    some colored char/s and some minor ascii 'graphics'.
    --
    Mike Easter

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From George@invalid@invalid.invalid to alt.os.linux.mint on Sun Oct 18 01:24:52 2026
    From Newsgroup: alt.os.linux.mint

    On 18/10/2026 00:31, Mike Easter wrote:
    Problem: my display from curl wttr.in/(myzipcode) is messed up; full
    of additional 'non-printing chars'.-a Previously it was not, maybe
    something changed at the wttr.in end, but see below.

    System LM 22.1 Cinnamon; terminal gnome-terminal 3.52 default mode

    Data point: alternate boot live LM 22.1 XFCE default terminal
    xfce4-terminal 1.1.4 default mode. Same command displays properly, no non-printing chars.

    The proper weather report output to the terminal is basically ascii
    with some colored char/s and some minor ascii 'graphics'.

    How about resetting it to default?
    sudo dconf reset -f /org/gnome/terminal/

    When you reopen the terminal, it will start to work normally. All your
    other settings will become defaults so colors, fonts etc will be defaults.







    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Lawrence =?iso-8859-13?q?D=FFOliveiro?=@ldo@nz.invalid to alt.os.linux.mint on Sun Oct 18 00:58:38 2026
    From Newsgroup: alt.os.linux.mint

    On Sat, 17 Oct 2026 16:31:21 -0700, Mike Easter wrote:

    Problem: my display from curl wttr.in/(myzipcode) is messed up; full
    of additional 'non-printing chars'. Previously it was not, maybe
    something changed at the wttr.in end ...

    Try it in your browser.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mike Easter@MikeE@ster.invalid to alt.os.linux.mint on Sat Oct 17 19:24:27 2026
    From Newsgroup: alt.os.linux.mint

    George wrote:
    How about resetting it to default?
    sudo dconf reset -f /org/gnome/terminal/

    No joy, ie same non-printers.
    --
    Mike Easter
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mike Easter@MikeE@ster.invalid to alt.os.linux.mint on Sat Oct 17 19:27:57 2026
    From Newsgroup: alt.os.linux.mint

    Lawrence DrCOOliveiro wrote:
    Mike Easter wrote:

    Problem: my display from curl wttr.in/(myzipcode) is messed up; full
    of additional 'non-printing chars'. Previously it was not, maybe
    something changed at the wttr.in end ...

    Try it in your browser.

    The browser result, like the xfce4 terminal, is correct.

    So, I guess my gnome terminal is misbehaving which is not corrected by commanding it to its defaults w/ the dconf reset.
    --
    Mike Easter
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mike Easter@MikeE@ster.invalid to alt.os.linux.mint on Sat Oct 17 19:34:05 2026
    From Newsgroup: alt.os.linux.mint

    Mike Easter wrote:
    Lawrence DrCOOliveiro wrote:
    Mike Easter wrote:

    Problem: my display from curl wttr.in/(myzipcode) is messed up; full
    of additional 'non-printing chars'. Previously it was not, maybe
    something changed at the wttr.in end ...

    Try it in your browser.

    The browser result, like the xfce4 terminal, is correct.

    So, I guess my gnome terminal is misbehaving which is not corrected by commanding it to its defaults w/ the dconf reset.

    The first small part of the report, which includes colored text, is
    correct; I think what is messed up is the terminal system for making
    'boxes' outlines.
    --
    Mike Easter
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Lawrence =?iso-8859-13?q?D=FFOliveiro?=@ldo@nz.invalid to alt.os.linux.mint on Sun Oct 18 03:04:22 2026
    From Newsgroup: alt.os.linux.mint

    On Sat, 17 Oct 2026 19:34:05 -0700, Mike Easter wrote:

    Mike Easter wrote:

    Lawrence DrCOOliveiro wrote:

    Mike Easter wrote:

    Problem: my display from curl wttr.in/(myzipcode) is messed up;
    full of additional 'non-printing chars'. Previously it was not,
    maybe something changed at the wttr.in end ...

    Try it in your browser.

    The browser result, like the xfce4 terminal, is correct.

    So, I guess my gnome terminal is misbehaving which is not corrected
    by commanding it to its defaults w/ the dconf reset.

    The first small part of the report, which includes colored text, is
    correct; I think what is messed up is the terminal system for making
    'boxes' outlines.

    The website isnrCOt doing any of that.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From George@invalid@invalid.invalid to alt.os.linux.mint on Sun Oct 18 04:07:19 2026
    From Newsgroup: alt.os.linux.mint

    On 18/10/2026 03:24, Mike Easter wrote:
    George wrote:
    How about resetting it to default?
    sudo dconf reset -f /org/gnome/terminal/

    No joy, ie same non-printers.

    You can create a new profile for the terminal. To do this, right-click anywhere in the terminal and select 'Preferences'. In the Preferences
    window, you will see an entry for Profiles with a plus sign beside it.
    Click on it to create a new default profile with all of the terminal's settings set to their defaults. You can then customise it as required,
    for example, for colours and fonts.

    When the new profile is working then you can delete the old profiles
    which are likely to be corrupted. To delete them it is in the drop-down
    arrows beside the profile names.




    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mike Easter@MikeE@ster.invalid to alt.os.linux.mint on Sat Oct 17 20:29:08 2026
    From Newsgroup: alt.os.linux.mint

    George wrote:
    You can create a new profile for the terminal. To do this, right-click anywhere in the terminal and select 'Preferences'. In the Preferences window, you will see an entry for Profiles with a plus sign beside it.
    Click on it to create a new default profile with all of the terminal's settings set to their defaults. You can then customise it as required,
    for example, for colours and fonts.

    When the new profile is working then you can delete the old profiles
    which are likely to be corrupted. To delete them it is in the drop-down arrows beside the profile names.

    I don't really know how to configure anything in a profile except to ask
    for the defaults.

    I created a new profile w/ the defaults. Then I set it as the default
    profile instead of the existing/prior 'unnamed' profile. Same problem.
    --
    Mike Easter
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mike Easter@MikeE@ster.invalid to alt.os.linux.mint on Sun Oct 18 09:42:34 2026
    From Newsgroup: alt.os.linux.mint

    Mike Easter wrote:
    Same problem.

    My workaround will be to use the browser instead of the terminal. I like
    the report because I can specify my postal zip, and I live in a geo area
    which has widespread different climates over short distances.
    --
    Mike Easter
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mike Easter@MikeE@ster.invalid to alt.os.linux.mint on Sun Oct 18 10:11:37 2026
    From Newsgroup: alt.os.linux.mint

    Mike Easter wrote:

    My workaround will be to use the browser instead of the terminal. I like
    the report because I can specify my postal zip, and I live in a geo area which has widespread different climates over short distances.

    Judging from the 15 decimal place lat/long location wttr.in uses for a
    zip location, it must get its data from private weather stations that I haven't found in popular databases.

    I may work on figuring that out from a curiosity perspective.
    --
    Mike Easter
    --- Synchronet 3.22a-Linux NewsLink 1.2