An earlier post dealt with my new _very noisy_ Generac
14 kW standby generator. I've searched online for some
sort of exterior acoustic panel / material to no avail.
What I've found is either interior use or giant things
for railroad or freeway use.
Any suggestions are welcome. Even a product that I could
re-purpose .. I'd estimate that 2 4 x 8 sheets of something
would be plenty - not enclosing the unit but sound-insulating
the brick wall behind and concrete pad underneath ;
and skirting the 1 ft. stand that it sits on .. perhaps some
on the ends so as not to restrict air flow ..
John T.
On 11/10/2026 4:17 PM, hubops@ccanoemail.com wrote:
An earlier post dealt with my new _very noisy_ Generac
14 kW standby generator. I've searched online for some
sort of exterior acoustic panel / material to no avail.
What I've found is either interior use or giant things
for railroad or freeway use.
Any suggestions are welcome. Even a product that I could
re-purpose .. I'd estimate that 2 4 x 8 sheets of something
would be plenty - not enclosing the unit but sound-insulating
the brick wall behind and concrete pad underneath ;
and skirting the 1 ft. stand that it sits on .. perhaps some
on the ends so as not to restrict air flow ..
John T.
Foam insulation panels my work for a temporary solution. It will degread >over time.
I'd also consider planting some shrubs that grow about 4' high for a
long term help.
On Tue, 10 Nov 2026 16:55:22 -0500, Ed P <esp@snet.n> wrote:What you don't want to put up is something that would impede servicing
On 11/10/2026 4:17 PM, hubops@ccanoemail.com wrote:
An earlier post dealt with my new _very noisy_ Generac
14 kW standby generator. I've searched online for some
sort of exterior acoustic panel / material to no avail.
What I've found is either interior use or giant things
for railroad or freeway use.
Any suggestions are welcome. Even a product that I could
re-purpose .. I'd estimate that 2 4 x 8 sheets of something
would be plenty - not enclosing the unit but sound-insulating
the brick wall behind and concrete pad underneath ;
and skirting the 1 ft. stand that it sits on .. perhaps some
on the ends so as not to restrict air flow ..
John T.
Foam insulation panels my work for a temporary solution. It will degread
over time.
I'd also consider planting some shrubs that grow about 4' high for a
long term help.
Plants are not an option. But I was thinking about some sort of
insulation panel material - to experiment with, at first,
and if it's effective - perhaps devise a coating / covering for it
as a more permanent solution.
John T.
On 11/11/2026 6:46 AM, hubops@ccanoemail.com wrote:
On Tue, 10 Nov 2026 16:55:22 -0500, Ed P <esp@snet.n> wrote:What you don't want to put up is something that would impede servicing
On 11/10/2026 4:17 PM, hubops@ccanoemail.com wrote:
An earlier post dealt with my new _very noisy_ Generac
14 kW standby generator. I've searched online for some
sort of exterior acoustic panel / material to no avail.
What I've found is either interior use or giant things
for railroad or freeway use.
Any suggestions are welcome. Even a product that I could
re-purpose .. I'd estimate that 2 4 x 8 sheets of something
would be plenty - not enclosing the unit but sound-insulating
the brick wall behind and concrete pad underneath ;
and skirting the 1 ft. stand that it sits on .. perhaps some
on the ends so as not to restrict air flow ..
John T.
Foam insulation panels my work for a temporary solution. It will degread >>> over time.
I'd also consider planting some shrubs that grow about 4' high for a
long term help.
Plants are not an option. But I was thinking about some sort of
insulation panel material - to experiment with, at first,
and if it's effective - perhaps devise a coating / covering for it
as a more permanent solution.
John T.
the generator, cleaning away whatever may fall on or immediately next to
the generator (leaves?, snow?, etc.), or ventilation required to prevent >carbon monoxide buildup adjacent to your house.
On Tue, 10 Nov 2026 16:55:22 -0500, Ed P <esp@snet.n> wrote:
On 11/10/2026 4:17 PM, hubops@ccanoemail.com wrote:
An earlier post dealt with my new _very noisy_ Generac
14 kW standby generator. I've searched online for some
sort of exterior acoustic panel / material to no avail.
What I've found is either interior use or giant things
for railroad or freeway use.
Any suggestions are welcome. Even a product that I could
re-purpose .. I'd estimate that 2 4 x 8 sheets of something
would be plenty - not enclosing the unit but sound-insulating
the brick wall behind and concrete pad underneath ;
and skirting the 1 ft. stand that it sits on .. perhaps some
on the ends so as not to restrict air flow ..
John T.
Foam insulation panels my work for a temporary solution. It will degread >>over time.
I'd also consider planting some shrubs that grow about 4' high for a
long term help.
Plants are not an option. But I was thinking about some sort of
insulation panel material - to experiment with, at first,
and if it's effective - perhaps devise a coating / covering for it
as a more permanent solution.
John T.
On Wed, 11 Nov 2026 06:46:33 -0500, hubops@ccanoemail.com wrote:
On Tue, 10 Nov 2026 16:55:22 -0500, Ed P <esp@snet.n> wrote:even a staggered board fence would make a big difference -4- 6 feet
On 11/10/2026 4:17 PM, hubops@ccanoemail.com wrote:
An earlier post dealt with my new _very noisy_ Generac
14 kW standby generator. I've searched online for some
sort of exterior acoustic panel / material to no avail.
What I've found is either interior use or giant things
for railroad or freeway use.
Any suggestions are welcome. Even a product that I could
re-purpose .. I'd estimate that 2 4 x 8 sheets of something
would be plenty - not enclosing the unit but sound-insulating
the brick wall behind and concrete pad underneath ;
and skirting the 1 ft. stand that it sits on .. perhaps some
on the ends so as not to restrict air flow ..
John T.
Foam insulation panels my work for a temporary solution. It will degread >>> over time.
I'd also consider planting some shrubs that grow about 4' high for a
long term help.
Plants are not an option. But I was thinking about some sort of
insulation panel material - to experiment with, at first,
and if it's effective - perhaps devise a coating / covering for it
as a more permanent solution.
John T.
tall1x6 boards,spaced 1 inch gap and 1 1/2 inch apart (2x4 on flat),
50% overlap.
| Sysop: | Amessyroom |
|---|---|
| Location: | Fayetteville, NC |
| Users: | 76 |
| Nodes: | 6 (0 / 6) |
| Uptime: | 61:00:15 |
| Calls: | 1,265 |
| Calls today: | 1 |
| Files: | 1,362 |
| D/L today: |
4 files (9,632K bytes) |
| Messages: | 286,219 |