• smartphone disables laptop

    From micky@NONONOmisc07@fmguy.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 13:57:10 2026
    From Newsgroup: alt.comp.os.windows-11

    Not sure what happened but what I think happened is that I laid my
    smartphone on the blank part of the laptop to the right of the touchpad,
    not touching any keys. About that time,the screen went dark. Nothing I
    did, pressing every key including ctrl-esc-delete and the power key, and removing and reinserting the power plug, had any effect.

    I'm really scared because I'm traveling and I need this computer. For
    things to do and to get back home.***

    This went on for at least 3 minutes and finally I lifted the cellphone
    from the laptop and the screen lit up again with the same thing showing
    that was showing before.

    Putting the phone there again just now did the same thing. It seems to
    be mostly the top of the phone against the right front side-edge of the
    laptop.

    What's going on?

    I with someone had warned me about this so I'm warning you.

    Dell Latitude 5510, Motorola phone with wireless charging capability. ---------------

    Another question. Turned on the laptop yesterday without a power
    supply, just to look up one little thing, and it said to plug it in
    because I only had 6% of the battery, SIX. I thought it was full.
    Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
    more than an hour it said 100%. What's going on?

    **I have a flashdrive backup of all my email etc, but I'd have to buy
    another laptop to use it. Then I'd have to bring both laptops home.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 12:24:50 2026
    From Newsgroup: alt.comp.os.windows-11


    micky wrote:

    I laid my smartphone on the blank part of the laptop to the right of
    the touchpad, not touching any keys. About that time,the screen went
    dark.
    What's going on?

    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From micky@NONONOmisc07@fmguy.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 17:36:37 2026
    From Newsgroup: alt.comp.os.windows-11

    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:


    micky wrote:

    I laid my smartphone on the blank part of the laptop to the right of
    the touchpad, not touching any keys. About that time,the screen went
    dark.
    What's going on?

    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the
    trash!
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 11:23:40 2026
    From Newsgroup: alt.comp.os.windows-11

    On Mon, 11/16/2026 10:36 AM, micky wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:


    micky wrote:

    I laid my smartphone on the blank part of the laptop to the right of
    the touchpad, not touching any keys. About that time,the screen went
    dark.
    What's going on?

    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the trash!


    Uh, don't throw your laptop in the trash.
    Laptops have to be taken to a recycler :-)

    The question we want answered now, is when you get two
    smartphones stuck to one another with magnets, how do
    you get them separated ? Mini-crowbar ?

    Hall Effect sensors aren't exactly efficient. They use the Right-Hand Rule
    of Physics, with Field, Voltage, Current on three different axis. The sensitivity
    is controlled by the amount of current. We used to play with those in
    Physics lab. Field times Current is proportional to voltage. The ones in
    the lab ran at 150mA. Which is, relatively speaking, a lot of current.
    If you turned the current down to 2mA, you'd need quite a field to
    operate one. Part of using a Hall Probe, is building a constant current
    source to operate it. That's so the "gain" is fixed. the semiconductor
    used in the Hall Probe is going to get warm when 150mA flows through it.
    After powering up a Hall Probe, you have to wait a few seconds for it
    to stabilize (as seen on the meter reading the voltage). And that's presumably a temperature-driven drift on the output.

    You would think there would be a hazard warning on the smartphone,
    regarding that magnet.

    You have other magnets in the vicinity that could also trigger that
    Hall Probe. Such as some dual-rubber-duck antenna for Wifi, they
    come with a Neodymium magnet in the base.

    It's a good thing Andy knew that -- I don't have a SmartPhone and would
    have no idea there is a magnet in there. One more hazard...

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Frank Slootweg@this@ddress.is.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 16:28:02 2026
    From Newsgroup: alt.comp.os.windows-11

    micky <NONONOmisc07@fmguy.com> wrote:

    [Andy covered the laptop blanking issue.]

    Dell Latitude 5510, Motorola phone with wireless charging capability. ---------------

    Another question. Turned on the laptop yesterday without a power
    supply, just to look up one little thing, and it said to plug it in
    because I only had 6% of the battery, SIX. I thought it was full.
    Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
    more than an hour it said 100%. What's going on?

    If a battery is really going bad, the (non-) 'charging' time between
    a few percent and '100%' will be very short, because the '100%' is 100%
    of very little capacity left. In other words, the '100%' number is
    meaningsless if the battery is bad/nearly_dead.

    For example, I have a laptop from 2003 whose battery 'charges' in a
    few minutes from a few percent to '100%' and discharges in seconds,
    the thing doesn't even completely boot before the battery gives up.

    [...]
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Frank Slootweg@this@ddress.is.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 16:35:11 2026
    From Newsgroup: alt.comp.os.windows-11

    micky <NONONOmisc07@fmguy.com> wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:


    micky wrote:

    I laid my smartphone on the blank part of the laptop to the right of
    the touchpad, not touching any keys. About that time,the screen went
    dark.
    What's going on?

    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the trash!

    You mean like they should warn people not to put their cat in the
    washing machine?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From knuttle@keith_nuttle@yahoo.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 13:07:22 2026
    From Newsgroup: alt.comp.os.windows-11

    On 11/16/2026 11:35 AM, Frank Slootweg wrote:
    micky <NONONOmisc07@fmguy.com> wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:


    micky wrote:

    I laid my smartphone on the blank part of the laptop to the right of
    the touchpad, not touching any keys. About that time,the screen went
    dark.
    What's going on?

    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the
    trash!

    You mean like they should warn people not to put their cat in the
    washing machine?
    Or put your hand under a rotary mower
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 14:12:04 2026
    From Newsgroup: alt.comp.os.windows-11

    On Mon, 11/16/2026 11:28 AM, Frank Slootweg wrote:
    micky <NONONOmisc07@fmguy.com> wrote:

    [Andy covered the laptop blanking issue.]

    Dell Latitude 5510, Motorola phone with wireless charging capability.
    ---------------

    Another question. Turned on the laptop yesterday without a power
    supply, just to look up one little thing, and it said to plug it in
    because I only had 6% of the battery, SIX. I thought it was full.
    Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
    more than an hour it said 100%. What's going on?

    If a battery is really going bad, the (non-) 'charging' time between
    a few percent and '100%' will be very short, because the '100%' is 100%
    of very little capacity left. In other words, the '100%' number is meaningsless if the battery is bad/nearly_dead.

    For example, I have a laptop from 2003 whose battery 'charges' in a
    few minutes from a few percent to '100%' and discharges in seconds,
    the thing doesn't even completely boot before the battery gives up.

    [...]


    I think Micky has bought replacement battery packs before,
    so he is familiar with the drill.

    With a little luck, the pack will discharge below the
    allowed minimum, and then it is not going to charge any more.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Li4ud8Khw7HCp8KxwqTDsQ==?=@winstonmvp@gmail.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 12:17:19 2026
    From Newsgroup: alt.comp.os.windows-11

    On 11/16/26 4:57 AM, micky wrote:

    Another question. Turned on the laptop yesterday without a power
    supply, just to look up one little thing, and it said to plug it in
    because I only had 6% of the battery, SIX. I thought it was full.
    Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
    more than an hour it said 100%. What's going on?

    **I have a flashdrive backup of all my email etc, but I'd have to buy
    another laptop to use it. Then I'd have to bring both laptops home.


    <https://www.nirsoft.net/utils/battery_information_view.html>

    Scroll down to download the 64 bit version zip file
    Open the Zip file and copy or extract the 3 files to a folder of your
    choices.
    Select the BatteryInfoView.exe file, rt click, Properties, and unblock
    the file
    Run the BatteryInfoView.exe file
    Review the results
    - especially the battery's stats
    => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health

    - the latter will tell you the the full charge capacity as a percent of
    the design capacity.

    e.g. this device's full charge capacity is 87.9% of the design capacity.
    - reasonable acceptable for an 8 yr old device
    --
    ...w-i|#-o-#-n|#
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Frank Slootweg@this@ddress.is.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 19:55:51 2026
    From Newsgroup: alt.comp.os.windows-11

    ...wi+o#n+ <winstonmvp@gmail.com> wrote:
    On 11/16/26 4:57 AM, micky wrote:

    Another question. Turned on the laptop yesterday without a power
    supply, just to look up one little thing, and it said to plug it in
    because I only had 6% of the battery, SIX. I thought it was full.
    Plugged it in and iirc it still said 6%, but in 30 minutes or at most no more than an hour it said 100%. What's going on?

    **I have a flashdrive backup of all my email etc, but I'd have to buy another laptop to use it. Then I'd have to bring both laptops home.

    <https://www.nirsoft.net/utils/battery_information_view.html>

    Scroll down to download the 64 bit version zip file
    Open the Zip file and copy or extract the 3 files to a folder of your choices.
    Select the BatteryInfoView.exe file, rt click, Properties, and unblock
    the file
    Run the BatteryInfoView.exe file
    Review the results
    - especially the battery's stats
    => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health

    - the latter will tell you the the full charge capacity as a percent of
    the design capacity.

    e.g. this device's full charge capacity is 87.9% of the design capacity.
    - reasonable acceptable for an 8 yr old device

    I also use BatteryInfoView and recommend it, but it does not always
    report the 'Designed Capacity' correctly, at least it doesn't for my HP (15-eh2560nd) laptop (and AFAIR it didn't for our previous HP laptops).

    For example it reports both 'Full Charged Capacity' and 'Designed
    Capacity' as 35,063 mWh (~35 Wh) (and hence 'Battery Health' as
    '100.0%').

    But the *actual* Design Capacity is 41 Wh, as is documented in its
    specs and *is* correctly reported by the 'HP Battery Check' section of
    the 'HP Support Assistant' utility.

    So my actual battery health is 'only' 85%.

    My advice: Check if 'Battery Health' is indeed a reasonable
    percentage, i.e. *not* 100%. But if it is 100%, then get the *real*
    Designed Capacity from the manufacturers specs and divide 'Full Charged Capacity' by that spec to get the actual battery health.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Carlos E.R.@robin_listas@es.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 03:06:48 2026
    From Newsgroup: alt.comp.os.windows-11

    On 2026-11-16 17:23, Paul wrote:
    It's a good thing Andy knew that -- I don't have a SmartPhone and would
    have no idea there is a magnet in there. One more hazard...

    My phone doesn't have any magnet, unless you count the speaker. However,
    the cover does have a magnet, in the clasp.
    --
    Cheers, Carlos.
    ESEfc-Efc+, EUEfc-Efc|;
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Mon Nov 16 22:56:52 2026
    From Newsgroup: alt.comp.os.windows-11

    On Mon, 11/16/2026 2:55 PM, Frank Slootweg wrote:
    ...w-i|#-o-#-n|# <winstonmvp@gmail.com> wrote:
    On 11/16/26 4:57 AM, micky wrote:

    Another question. Turned on the laptop yesterday without a power
    supply, just to look up one little thing, and it said to plug it in
    because I only had 6% of the battery, SIX. I thought it was full.
    Plugged it in and iirc it still said 6%, but in 30 minutes or at most no >>> more than an hour it said 100%. What's going on?

    **I have a flashdrive backup of all my email etc, but I'd have to buy
    another laptop to use it. Then I'd have to bring both laptops home.

    <https://www.nirsoft.net/utils/battery_information_view.html>

    Scroll down to download the 64 bit version zip file
    Open the Zip file and copy or extract the 3 files to a folder of your
    choices.
    Select the BatteryInfoView.exe file, rt click, Properties, and unblock
    the file
    Run the BatteryInfoView.exe file
    Review the results
    - especially the battery's stats
    => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health

    - the latter will tell you the the full charge capacity as a percent of
    the design capacity.

    e.g. this device's full charge capacity is 87.9% of the design capacity.
    - reasonable acceptable for an 8 yr old device

    I also use BatteryInfoView and recommend it, but it does not always
    report the 'Designed Capacity' correctly, at least it doesn't for my HP (15-eh2560nd) laptop (and AFAIR it didn't for our previous HP laptops).

    For example it reports both 'Full Charged Capacity' and 'Designed
    Capacity' as 35,063 mWh (~35 Wh) (and hence 'Battery Health' as
    '100.0%').

    But the *actual* Design Capacity is 41 Wh, as is documented in its
    specs and *is* correctly reported by the 'HP Battery Check' section of
    the 'HP Support Assistant' utility.

    So my actual battery health is 'only' 85%.

    My advice: Check if 'Battery Health' is indeed a reasonable
    percentage, i.e. *not* 100%. But if it is 100%, then get the *real*
    Designed Capacity from the manufacturers specs and divide 'Full Charged Capacity' by that spec to get the actual battery health.


    The EEPROM in the battery pack, is used to record charging cycles.
    A formula is used to estimate remaining battery life, based on
    how many times it has been charged. So some of the information is
    static (manufacturing-time info), and some is dynamic (estimates
    or a full charge cycle provides a calibration of what is current).

    The EEPROM has a serial number, so if you have two battery packs
    and you swap them, the laptop reads the EEPROM and determines
    which battery pack this is, and any calibrations done are
    recorded in that EEPROM. This keeps the information siloed on
    a per-pack basis.

    For battery packs that snap in, four blades may carry power,
    one blade can be a "battery enable" to help avoid shorting
    the pack when it is outside the laptop, and some additional
    blades are the datapath for the EEPROM.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From micky@NONONOmisc07@fmguy.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 12:30:58 2026
    From Newsgroup: alt.comp.os.windows-11

    In alt.comp.os.windows-11, on 16 Nov 2026 16:35:11 GMT, Frank Slootweg <this@ddress.is.invalid> wrote:

    micky <NONONOmisc07@fmguy.com> wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:


    micky wrote:

    I laid my smartphone on the blank part of the laptop to the right of
    the touchpad, not touching any keys. About that time,the screen went
    dark.
    What's going on?

    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the
    trash!

    You mean like they should warn people not to put their cat in the
    washing machine?

    That too.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Carlos E.R.@robin_listas@es.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 11:48:29 2026
    From Newsgroup: alt.comp.os.windows-11

    On 2026-11-17 04:56, Paul wrote:
    On Mon, 11/16/2026 2:55 PM, Frank Slootweg wrote:
    ...w-i|#-o-#-n|# <winstonmvp@gmail.com> wrote:
    On 11/16/26 4:57 AM, micky wrote:

    ...


    The EEPROM in the battery pack, is used to record charging cycles.
    A formula is used to estimate remaining battery life, based on
    how many times it has been charged. So some of the information is
    static (manufacturing-time info), and some is dynamic (estimates
    or a full charge cycle provides a calibration of what is current).

    The EEPROM has a serial number, so if you have two battery packs
    and you swap them, the laptop reads the EEPROM and determines
    which battery pack this is, and any calibrations done are
    recorded in that EEPROM. This keeps the information siloed on
    a per-pack basis.

    For battery packs that snap in, four blades may carry power,
    one blade can be a "battery enable" to help avoid shorting
    the pack when it is outside the laptop, and some additional
    blades are the datapath for the EEPROM.

    Paul


    I thought the computer would be accumulating stats and making educated predictions. At least on machines where the battery is difficult to
    replace, would make sense.
    --
    Cheers, Carlos.
    ESEfc-Efc+, EUEfc-Efc|;
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From micky@NONONOmisc07@fmguy.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 12:55:54 2026
    From Newsgroup: alt.comp.os.windows-11

    In alt.comp.os.windows-11, on 16 Nov 2026 16:28:02 GMT, Frank Slootweg <this@ddress.is.invalid> wrote:

    micky <NONONOmisc07@fmguy.com> wrote:

    [Andy covered the laptop blanking issue.]

    Dell Latitude 5510, Motorola phone with wireless charging capability.
    ---------------

    Another question. Turned on the laptop yesterday without a power
    supply, just to look up one little thing, and it said to plug it in
    because I only had 6% of the battery, SIX. I thought it was full.
    Plugged it in and iirc it still said 6%, but in 30 minutes or at most no
    more than an hour it said 100%. What's going on?

    If a battery is really going bad, the (non-) 'charging' time between
    a few percent and '100%' will be very short, because the '100%' is 100%
    of very little capacity left. In other words, the '100%' number is >meaningsless if the battery is bad/nearly_dead.

    Ugh. I bought this used 1.5 years ago and for some reason I've thought
    it had a good battery. I unplugged it just now and after a couple
    minutes it said he battery was good for 6 hours and 17 minutes. That
    sounds great.

    Let me go get infoview and see what it says. ...Oh, it's nirsoft. I
    have the whole NirLaucher pack so let me look at it.

    Had to unplug it again but Nir says the same thing, 6 hours and 11
    minutes. The battery name is Dell 10X1J97 which sounds like the an
    original Dell battery, even though the manufacturer is LGC-LGC4.47,
    which google ai says is often made for my model Dell. So if not the
    original battery it's still the right battery.

    Battery health is 89.3%.
    Number of charge/discharge cycles is 0, which I'm guessing*** means the
    battery has never been really low, even though it said 6% to me two days
    ago. Maybe the 6% was the error. It was at 100% the night before, I had hibernated it -- I'm sure I had** -- and then just started it.

    ***No, the sum of partial uses. 0 seems a little low. :-)

    ** And even if I'd only slept it, 12 hours of sleep shouldn't put it
    down to 6%.

    Current capacity is 60,279 mWH and low battery2 is 6,794. Big
    difference. 6% must have been some kind of fluke?

    For example, I have a laptop from 2003 whose battery 'charges' in a
    few minutes from a few percent to '100%' and discharges in seconds,
    the thing doesn't even completely boot before the battery gives up.

    Wow. I rarely run it without plugging it in first. Even for the car I
    have a power supply.

    [...]
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 09:08:35 2026
    From Newsgroup: alt.comp.os.windows-11

    On Tue, 11/17/2026 5:48 AM, Carlos E.R. wrote:
    On 2026-11-17 04:56, Paul wrote:
    On Mon, 11/16/2026 2:55 PM, Frank Slootweg wrote:
    ...w-i|#-o-#-n|# <winstonmvp@gmail.com> wrote:
    On 11/16/26 4:57 AM, micky wrote:

    ...


    The EEPROM in the battery pack, is used to record charging cycles.
    A formula is used to estimate remaining battery life, based on
    how many times it has been charged. So some of the information is
    static (manufacturing-time info), and some is dynamic (estimates
    or a full charge cycle provides a calibration of what is current).

    The EEPROM has a serial number, so if you have two battery packs
    and you swap them, the laptop reads the EEPROM and determines
    which battery pack this is, and any calibrations done are
    recorded in that EEPROM. This keeps the information siloed on
    a per-pack basis.

    For battery packs that snap in, four blades may carry power,
    one blade can be a "battery enable" to help avoid shorting
    the pack when it is outside the laptop, and some additional
    blades are the datapath for the EEPROM.

    -a-a-a Paul


    I thought the computer would be accumulating stats and making educated predictions.
    At least on machines where the battery is difficult to replace, would make sense.

    The parameters are stored in the EEPROM, so that the parameters accompany
    the pack. I found one Youtube video of a 3 cell flat battery, which uses
    three pouch cells, and the connector on the pack looks like it has at
    least ten contacts. I've seen what looks like lower pin count connectors joining such packs before, and I doubt I would find an article with details. But at least for that sample pack, it looks like it has room for a couple contacts for a serial bus.

    Sometimes the contact count, is because the connector current flow rating
    is not sufficient for one contact to carry the application current, and
    they seem to use a pair of contacts (at least) for VCC and GND. And for
    safety, there can be a MOSFET in the pack and a gate terminal for rigging
    some sort of "battery-enable" that is only enabled when the pack meets connector.

    The pouch cells in a flat battery, give the cell a pretty good max current capability, while the connector joining it to the laptop is pretty
    limiting by comparison.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mark Lloyd@nomail@here.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 15:54:35 2026
    From Newsgroup: alt.comp.os.windows-11

    On Mon, 16 Nov 2026 11:23:40 -0500, Paul wrote:

    [snip]

    Wow. Maybe they should warn people. What if I'd thrown the laptop in
    the trash!


    Uh, don't throw your laptop in the trash.
    Laptops have to be taken to a recycler :-)

    Once, a friend gave me a laptop found in a dumpster. There was nothing
    wrong with it except a missing power supply. I used one of those
    "universal" ones. I always do my own OS installation, but I did look at
    what was on there first. It included scans of the former owner's drivers license and social security card.

    [snip]
    --
    38 days until the winter celebration (Friday, December 25, 2026 00:00
    for 1 day).

    Mark Lloyd
    http://notstupid.us/

    "The idea of a good society is something you do not need a religion and
    eternal punishment to buttress; you need a religion if you are terrified
    of death." [Gore Vidal]
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Mark Lloyd@nomail@here.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 15:55:53 2026
    From Newsgroup: alt.comp.os.windows-11

    On Mon, 16 Nov 2026 13:07:22 -0500, knuttle wrote:

    [snip]

    You mean like they should warn people not to put their cat in the
    washing machine?
    Or put your hand under a rotary mower

    I've seen mowers that have warning labels about that.
    --
    38 days until the winter celebration (Friday, December 25, 2026 00:00
    for 1 day).

    Mark Lloyd
    http://notstupid.us/

    "The idea of a good society is something you do not need a religion and
    eternal punishment to buttress; you need a religion if you are terrified
    of death." [Gore Vidal]
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From micky@NONONOmisc07@fmguy.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 18:35:29 2026
    From Newsgroup: alt.comp.os.windows-11

    In alt.comp.os.windows-11, on 17 Nov 2026 15:55:53 GMT, Mark Lloyd <nomail@here.invalid> wrote:

    On Mon, 16 Nov 2026 13:07:22 -0500, knuttle wrote:

    [snip]

    You mean like they should warn people not to put their cat in the
    washing machine?
    Or put your hand under a rotary mower

    I've seen mowers that have warning labels about that.

    LOL. That should help me.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From J. P. Gilliver@G6JPG@255soft.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 21:20:08 2026
    From Newsgroup: alt.comp.os.windows-11

    On 2026/11/16 16:23:40, Paul wrote:
    On Mon, 11/16/2026 10:36 AM, micky wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:
    []
    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the
    trash!
    []
    The question we want answered now, is when you get two
    smartphones stuck to one another with magnets, how do
    you get them separated ? Mini-crowbar ?

    Hall Effect sensors aren't exactly efficient. They use the Right-Hand Rule
    of Physics, with Field, Voltage, Current on three different axis. The sensitivity
    is controlled by the amount of current. We used to play with those in
    Physics lab. Field times Current is proportional to voltage. The ones in
    the lab ran at 150mA. Which is, relatively speaking, a lot of current.

    And would have a significant effect on battery life in a laptop.

    If you turned the current down to 2mA, you'd need quite a field to
    operate one. Part of using a Hall Probe, is building a constant current source to operate it. That's so the "gain" is fixed. the semiconductor

    I wasn't aware laptops used them to detect lid closed - I thought it was
    a switch in the hinge - but, if they do, it wouldn't have to be as
    sensitive as one for lab use - the manufacturer knows where they put the
    magnet in the lid, so could use quite an insensitive (and thus
    low-current) sensor. (They wouldn't _want_ it to be too sensitive, lest
    what happened to micky happens!)
    []
    You would think there would be a hazard warning on the smartphone,
    regarding that magnet.
    []
    It's a good thing Andy knew that -- I don't have a SmartPhone and would
    have no idea there is a magnet in there. One more hazard...

    Paul

    I don't think there _is_ a magnet in most smartphones, though there is something a magnet will happily cling to (the cell maybe?); however, if
    you've bought one of those flat square magnets sold for sticking
    smartphones to things (like car dashboards), and forgotten you've left
    it stuck to the 'phone, the effect would be the same. and maybe some
    'phone _cases_ have a magnet in them for a similar purpose.

    Please use the Reply-To: rather than the From: email address.
    --
    J. P. Gilliver. UMRA: 1960/<1985 MB++G()ALIS-Ch++(p)Ar++T+H+Sh0!:`)DNAf

    You cannot simply assume someone is honest just because they are not an MP.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From J. P. Gilliver@G6JPG@255soft.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 21:56:02 2026
    From Newsgroup: alt.comp.os.windows-11

    On 2026/11/16 19:17:19, ...w-i|#-o-#-n|# wrote:
    []
    <https://www.nirsoft.net/utils/battery_information_view.html>

    Scroll down to download the 64 bit version zip file

    (If you have a 64-bit OS of course!)

    Open the Zip file and copy or extract the 3 files to a folder of your choices.
    Select the BatteryInfoView.exe file, rt click, Properties, and unblock
    the file

    What's that about? I've never heard of "unblocking". I certainly didn't
    need to in this case. (Can't see anything under Properties that looks
    like it.) Maybe it's a Windows 11 thing?

    Run the BatteryInfoView.exe file
    Review the results
    - especially the battery's stats
    => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health

    - the latter will tell you the the full charge capacity as a percent of
    the design capacity.

    Mine - which seems to have come back to life - is ...


    e.g. this device's full charge capacity is 87.9% of the design capacity.
    - reasonable acceptable for an 8 yr old device

    ... 99.4% of current capacity, 64.8% health (30 Wh designed capacity,
    19.44 full, 19.32 current), which I'm happy with given its age.

    Why are we still using milliunits? I remember in the 1970s, they might
    sell a portable audio device with an audio output of 1200 mW (probably
    PMPO as well), but I thought we'd got past that. Except, it seems, when discussing battery and cell capacities. It's silly.

    (Supreme example - I had back then a little medium wave radio that ran
    on a single AA cell [so presumably used germanium devices], and was
    about an AA cell square. According to the leaflet that came with it, it
    had an output power of 95 MW! Someone mixing up their ms and Ms ...)

    Thanks - a useful utility, as always with NirSoft. It isn't in the
    Nirsoft Suite that I have.

    It isn't showing anything for the four "(Estimated)" times at the bottom
    of the readout.
    --
    J. P. Gilliver. UMRA: 1960/<1985 MB++G()ALIS-Ch++(p)Ar++T+H+Sh0!:`)DNAf

    You need 10 wise men to get back a rock thrown in a lake by an idiot
    - Romanian proverb (tweeted by Ovidiu S @plount_os 2023-2-6)
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Lars Poulsen@lars@beagle-ears.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Tue Nov 17 18:34:35 2026
    From Newsgroup: alt.comp.os.windows-11

    On 11/17/2026 13:20, J. P. Gilliver wrote:
    I don't think there _is_ a magnet in most smartphones, though there is something a magnet will happily cling to (the cell maybe?); however, if you've bought one of those flat square magnets sold for sticking
    smartphones to things (like car dashboards), and forgotten you've left
    it stuck to the 'phone, the effect would be the same. and maybe some
    'phone _cases_ have a magnet in them for a similar purpose.

    Almost all newer smartphones that allow wireless charging have a fairly
    large ring shaped magnet in the back to help align the phone with the
    charger.
    --
    Lars Poulsen - an old geek in Santa Barbara, California
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 00:38:18 2026
    From Newsgroup: alt.comp.os.windows-11

    On Tue, 11/17/2026 4:56 PM, J. P. Gilliver wrote:
    On 2026/11/16 19:17:19, ...w-i|#-o-#-n|# wrote:
    []
    <https://www.nirsoft.net/utils/battery_information_view.html>

    Scroll down to download the 64 bit version zip file

    (If you have a 64-bit OS of course!)

    Open the Zip file and copy or extract the 3 files to a folder of your
    choices.
    Select the BatteryInfoView.exe file, rt click, Properties, and unblock
    the file

    What's that about? I've never heard of "unblocking". I certainly didn't
    need to in this case. (Can't see anything under Properties that looks
    like it.) Maybe it's a Windows 11 thing?

    Run the BatteryInfoView.exe file
    Review the results
    - especially the battery's stats
    => Capacity %, Full Charge Capacity, Designed Capacity, Battery Health

    - the latter will tell you the the full charge capacity as a percent of
    the design capacity.

    Mine - which seems to have come back to life - is ...


    e.g. this device's full charge capacity is 87.9% of the design capacity.
    - reasonable acceptable for an 8 yr old device

    ... 99.4% of current capacity, 64.8% health (30 Wh designed capacity,
    19.44 full, 19.32 current), which I'm happy with given its age.

    Why are we still using milliunits? I remember in the 1970s, they might
    sell a portable audio device with an audio output of 1200 mW (probably
    PMPO as well), but I thought we'd got past that. Except, it seems, when discussing battery and cell capacities. It's silly.

    (Supreme example - I had back then a little medium wave radio that ran
    on a single AA cell [so presumably used germanium devices], and was
    about an AA cell square. According to the leaflet that came with it, it
    had an output power of 95 MW! Someone mixing up their ms and Ms ...)

    Thanks - a useful utility, as always with NirSoft. It isn't in the
    Nirsoft Suite that I have.

    It isn't showing anything for the four "(Estimated)" times at the bottom
    of the readout.


    Unblocking:

    1) Download an EXE from the Internet, say.
    2) Do Properties
    3) At the bottom you will see

    Security: This file came from another +-+
    computer and might be blocked to | | Unblock
    help protect this computer. +-+

    4) If you click the tick box to Unblock it, it is Unblocked.

    The mechanism uses an Alternate Stream, which is vaguely similar
    to how the MacOS file system could have a Resource Fork and a Data Fork.
    The Alternate Stream file is tiny in this case, and makes some mention
    of "Zone 3". The Zone definitions were invented long ago for Internet Explorer, and part of what was defined for IE, continues to live on in the computer.
    An Alternate Stream that says "Zone 3" is an admission the file came
    from the Internet Zone.

    By unblocking it, that erases the tiny Alternate Stream associated with the file.

    *******

    The Sysinternals program "Streams.exe" is capable of displaying information about such entries in the file system.

    https://learn.microsoft.com/en-us/sysinternals/downloads/streams

    $ streams64 sp84711.exe # We're checking an HP executable download now
    # I haven't unblocked this

    streams v1.60 - Reveal NTFS alternate streams.
    Copyright (C) 2005-2016 Mark Russinovich
    Sysinternals - www.sysinternals.com

    C:\Users\paul\Downloads\sp84711.exe:
    :Zone.Identifier:$DATA 26

    $ notepad sp84711.exe <=== This is to identify the "main" stream of this file
    $ notepad sp84711.exe:Zone.Identifier <=== This opens the Alternate Stream attached to that download

    [ZoneTransfer] \___ This marker is what blocks execution
    ZoneId=3 / Streams says this Alternate Stream is 26 bytes or so.

    NTFS can handle Alternate Streams, FAT32 cannot. Presumably if you
    copied a download onto a FAT32 partition, erased the original
    file (erasing both the file and its alternate stream file),
    then copied the file back from the FAT32 partition, the
    Alternate Stream would be gone and the "Security:" header
    would no longer be at the bottom of the Properties dialog
    for the file. That's an example of a procedure, where clicking
    the Unblock box is unnecessary, due to how you have handled the file.

    Unlike the MacOS, you can have more than one Alternate Stream attached
    to a file. This is where things get a bit kooky.

    https://colatkinson.site/windows/ntfs/2019/05/14/alternate-data-stream-size/

    $ python named_streams.py
    a.txt 1637 <=== so, at least a thousand Named Alternate Streams seem possible
    b.txt 2729
    c.txt 4094
    d.txt 5458
    e.txt 6550

    Since the reasoning behind a (variable!) limit is a Trivial Pursuit question, we'll leave that right there.

    Too large attrlist (262208): Numerical result out of range [ $ATTRLIST is larger than 0x40000 ]

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 19:49:52 2026
    From Newsgroup: alt.comp.os.windows-11

    On 18/11/2026 2:54 am, Mark Lloyd wrote:
    On Mon, 16 Nov 2026 11:23:40 -0500, Paul wrote:

    [snip]

    Wow. Maybe they should warn people. What if I'd thrown the laptop in
    the trash!

    Uh, don't throw your laptop in the trash.
    Laptops have to be taken to a recycler :-)

    Once, a friend gave me a laptop found in a dumpster. There was nothing
    wrong with it except a missing power supply. I used one of those
    "universal" ones. I always do my own OS installation, but I did look at
    what was on there first. It included scans of the former owner's drivers license and social security card.

    [snip]

    Did you contact the former owner to let him/her know the Data was still
    there on the Drive?? Perhaps they needed to do a better scrubbing before dumping the HD/Computer.
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 19:56:54 2026
    From Newsgroup: alt.comp.os.windows-11

    On 18/11/2026 8:20 am, J. P. Gilliver wrote:
    On 2026/11/16 16:23:40, Paul wrote:
    On Mon, 11/16/2026 10:36 AM, micky wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:
    []
    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the >>> trash!
    []
    The question we want answered now, is when you get two
    smartphones stuck to one another with magnets, how do
    you get them separated ? Mini-crowbar ?

    Hall Effect sensors aren't exactly efficient. They use the Right-Hand Rule >> of Physics, with Field, Voltage, Current on three different axis. The sensitivity
    is controlled by the amount of current. We used to play with those in
    Physics lab. Field times Current is proportional to voltage. The ones in
    the lab ran at 150mA. Which is, relatively speaking, a lot of current.

    And would have a significant effect on battery life in a laptop.

    If you turned the current down to 2mA, you'd need quite a field to
    operate one. Part of using a Hall Probe, is building a constant current
    source to operate it. That's so the "gain" is fixed. the semiconductor

    I wasn't aware laptops used them to detect lid closed - I thought it was
    a switch in the hinge - but, if they do, it wouldn't have to be as
    sensitive as one for lab use - the manufacturer knows where they put the magnet in the lid, so could use quite an insensitive (and thus
    low-current) sensor. (They wouldn't _want_ it to be too sensitive, lest
    what happened to micky happens!)
    []
    You would think there would be a hazard warning on the smartphone,
    regarding that magnet.
    []
    It's a good thing Andy knew that -- I don't have a SmartPhone and would
    have no idea there is a magnet in there. One more hazard...

    Paul

    I don't think there _is_ a magnet in most smartphones,

    I do some Bar work at a local Services Club Bar .... and the Club
    President often leaves his Mobile Phone stuck to the side of the Cash
    Register .... you know, so he'd know where it is.

    So which has the magnet, the phone or the register??
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 19:59:33 2026
    From Newsgroup: alt.comp.os.windows-11

    On 17/11/2026 3:35 am, Frank Slootweg wrote:
    micky <NONONOmisc07@fmguy.com> wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:
    micky wrote:

    I laid my smartphone on the blank part of the laptop to the right of
    the touchpad, not touching any keys. About that time,the screen went
    dark.
    What's going on?

    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the
    trash!

    You mean like they should warn people not to put their cat in the
    washing machine?

    Hmm!! My car needs a wash .... and I've just gotten a new washing
    machine!! ;-P
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 21:47:17 2026
    From Newsgroup: alt.comp.os.windows-11

    On 18/11/2026 1:08 am, Paul wrote:

    <Snip>

    Sometimes the contact count, is because the connector current flow rating
    is not sufficient for one contact to carry the application current, and
    they seem to use a pair of contacts (at least) for VCC and GND. And for safety, there can be a MOSFET in the pack and a gate terminal for rigging some sort of "battery-enable" that is only enabled when the pack meets connector.

    The USB Cable for my External (spinning rust) Hard-drive has a USB cable
    that is single-ended at one end and double-ended at other end .... and I
    was guessing that was so that it could be drawing the required current
    to spin the HD via two USB feeds from the Computer.
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 05:48:20 2026
    From Newsgroup: alt.comp.os.windows-11

    On Wed, 11/18/2026 3:49 AM, Daniel70 wrote:
    On 18/11/2026 2:54 am, Mark Lloyd wrote:
    On Mon, 16 Nov 2026 11:23:40 -0500, Paul wrote:

    [snip]

    Wow. Maybe they should warn people. What if I'd thrown the laptop in
    the trash!

    Uh, don't throw your laptop in the trash.
    Laptops have to be taken to a recycler :-)

    Once, a friend gave me a laptop found in a dumpster. There was nothing
    wrong with it except a missing power supply. I used one of those
    "universal" ones. I always do my own OS installation, but I did look at
    what was on there first. It included scans of the former owner's drivers
    license and social security card.
    -a [snip]

    Did you contact the former owner to let him/her know the Data was still there on the Drive?? Perhaps they needed to do a better scrubbing before dumping the HD/Computer.

    The person who threw out the computer, was not the owner.

    Paul



    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 06:01:43 2026
    From Newsgroup: alt.comp.os.windows-11

    On Wed, 11/18/2026 5:47 AM, Daniel70 wrote:
    On 18/11/2026 1:08 am, Paul wrote:

    <Snip>

    Sometimes the contact count, is because the connector current flow rating
    is not sufficient for one contact to carry the application current, and
    they seem to use a pair of contacts (at least) for VCC and GND. And for
    safety, there can be a MOSFET in the pack and a gate terminal for rigging
    some sort of "battery-enable" that is only enabled when the pack meets connector.

    The USB Cable for my External (spinning rust) Hard-drive has a USB cable that is single-ended at one end and double-ended at other end .... and I was guessing that was so that it could be drawing the required current to spin the HD via two USB feeds from the Computer.

    That's a hydra cable, a "two headed snake" :-)

    The 2.5" drive needs 1.0-1.1 amps at 5 volts to spin up.

    If using a two headed cable, you try to run it off two stacks.
    There can be one fuse, shared by two connectors in a stack,
    so one hydra goes in one stack, the other hydra goes in
    the second stack. Some desktops have enough connectors for this.

    +---------+ +---------+
    | - - - - |<== | - - - - |<== Each stack has a fuse.
    +---------+ +---------+ Use one connector from each stack.
    +---------+ +---------+
    | - - - - | | - - - - |
    +---------+ +---------+

    On a USB3 connector, the fuse on that has a higher rating,
    and a single stack might be enough. You
    could plug the hydra into both on a single USB3 stack.

    +---------+ A USB3 stack, two blue connectors.
    | - - - - |<== Can feed Hydra cable off the same stack.
    +---------+
    +---------+
    | - - - - |<==
    +---------+

    Some drive housings had a single cable (point to point) plus
    a barrel connector for aux power. Some had the hydra cable.
    Some don't have a barrel for aux power, and they don't
    have the right cable either, and it is up to the owner to
    deal with it.

    Barrels of fun really. Needs a well stocked cupboard.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 23:18:07 2026
    From Newsgroup: alt.comp.os.windows-11

    On 18/11/2026 9:48 pm, Paul wrote:
    On Wed, 11/18/2026 3:49 AM, Daniel70 wrote:
    On 18/11/2026 2:54 am, Mark Lloyd wrote:
    On Mon, 16 Nov 2026 11:23:40 -0500, Paul wrote:

    [snip]

    Wow. Maybe they should warn people. What if I'd thrown the laptop in >>>>> the trash!

    Uh, don't throw your laptop in the trash.
    Laptops have to be taken to a recycler :-)

    Once, a friend gave me a laptop found in a dumpster. There was nothing
    wrong with it except a missing power supply. I used one of those
    "universal" ones. I always do my own OS installation, but I did look at
    what was on there first. It included scans of the former owner's drivers >>> license and social security card.
    -a [snip]

    Did you contact the former owner to let him/her know the Data was still
    there on the Drive?? Perhaps they needed to do a better scrubbing before
    dumping the HD/Computer.

    The person who threw out the computer, was not the owner.

    Paul

    Ah! Yes.
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From J. P. Gilliver@G6JPG@255soft.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 13:20:41 2026
    From Newsgroup: alt.comp.os.windows-11

    On 2026/11/18 8:56:54, Daniel70 wrote:
    On 18/11/2026 8:20 am, J. P. Gilliver wrote:
    []
    I don't think there _is_ a magnet in most smartphones,

    I do some Bar work at a local Services Club Bar .... and the Club
    President often leaves his Mobile Phone stuck to the side of the Cash Register .... you know, so he'd know where it is.

    So which has the magnet, the phone or the register??

    Seems I was wrong - the ones that allow contactless charging (which is
    most of them these days?) apparently do have one, to help align them
    with the charger.
    --
    J. P. Gilliver. UMRA: 1960/<1985 MB++G()ALIS-Ch++(p)Ar++T+H+Sh0!:`)DNAf

    There will always be people who don't value music unless it's written
    for the concert hall - Debbie Wiseman (composer), RT 2025-5-24-30
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From J. P. Gilliver@G6JPG@255soft.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 13:35:27 2026
    From Newsgroup: alt.comp.os.windows-11

    On 2026/11/18 5:38:18, Paul wrote:
    On Tue, 11/17/2026 4:56 PM, J. P. Gilliver wrote:
    On 2026/11/16 19:17:19, ...w-i|#-o-#-n|# wrote:
    []
    Open the Zip file and copy or extract the 3 files to a folder of your
    choices.
    Select the BatteryInfoView.exe file, rt click, Properties, and unblock
    the file

    What's that about? I've never heard of "unblocking". I certainly didn't
    need to in this case. (Can't see anything under Properties that looks
    like it.) Maybe it's a Windows 11 thing?
    []
    Unblocking:

    1) Download an EXE from the Internet, say.
    2) Do Properties
    3) At the bottom you will see

    Security: This file came from another +-+
    computer and might be blocked to | | Unblock
    help protect this computer. +-+

    4) If you click the tick box to Unblock it, it is Unblocked.

    You're right; I never noticed that when I looked at
    batteryinfoview-x64.zip's properties as instructed by Winston. So I
    didn't tick it - and was still able to extract and run the utility.

    The mechanism uses an Alternate Stream, which is vaguely similar

    We've (well, you've, I think!) mentioned these before; IIRR they don't
    exist under the FS that came before NTFS (whose name I can't remember,
    though I think it was variants of FAT). I can't remember what context
    they came up for either - might have been rights management (for things
    like video/audio files).
    []
    NTFS can handle Alternate Streams, FAT32 cannot. Presumably if you
    Ah, so I remembered right.

    copied a download onto a FAT32 partition, erased the original
    file (erasing both the file and its alternate stream file),
    then copied the file back from the FAT32 partition, the
    Alternate Stream would be gone and the "Security:" header
    would no longer be at the bottom of the Properties dialog
    for the file. That's an example of a procedure, where clicking
    the Unblock box is unnecessary, due to how you have handled the file.

    As mentioned, I didn't have to do this anyway. (I have seen the warning
    block about "this file came from the internet and might not be safe - do
    you want to use it anyway?" or similar wording; that didn't appear in
    this case, possibly due to it being via a .zip file?)
    []
    Since the reasoning behind a (variable!) limit is a Trivial Pursuit question, we'll leave that right there.

    :-)
    []
    --
    J. P. Gilliver. UMRA: 1960/<1985 MB++G()ALIS-Ch++(p)Ar++T+H+Sh0!:`)DNAf

    There will always be people who don't value music unless it's written
    for the concert hall - Debbie Wiseman (composer), RT 2025-5-24-30
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 13:42:28 2026
    From Newsgroup: alt.comp.os.windows-11

    "J. P. Gilliver" wrote:

    I don't think thereis a magnet in most smartphones, though there is
    something a magnet will happily cling to

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 13:51:39 2026
    From Newsgroup: alt.comp.os.windows-11


    Andy Burns wrote:

    [Sorry clicked 'send' straight away]

    "J. P. Gilliver" wrote:

    I don't think thereis a magnet in most smartphones,

    None of the phones I presently own have a magnet (tested by offering up
    a small washer to them)

    though there is something a magnet will happily cling to

    my tablet and e-reader do have magnets, I suspect more recent phones
    have "magsafe" charging/docking ... the same name used to refer to apple proprietary magnetic charging cable that would easily come loose if accidentally tugged-on now it refers to wireless charging with magnets
    to align the coils.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Frank Slootweg@this@ddress.is.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 15:04:26 2026
    From Newsgroup: alt.comp.os.windows-11

    J. P. Gilliver <G6JPG@255soft.uk> wrote:
    On 2026/11/18 5:38:18, Paul wrote:
    [...]
    Unblocking:

    1) Download an EXE from the Internet, say.
    2) Do Properties
    3) At the bottom you will see

    Security: This file came from another +-+
    computer and might be blocked to | | Unblock
    help protect this computer. +-+

    4) If you click the tick box to Unblock it, it is Unblocked.

    You're right; I never noticed that when I looked at
    batteryinfoview-x64.zip's properties as instructed by Winston. So I
    didn't tick it - and was still able to extract and run the utility.

    AFAIK, the blocking is irrelevant for a ZIP file, because you do not
    execute that. But Paul's example mentioned a (HP) .exe file and for such
    a file the blocking protects you against accidentily executing it.

    [...]
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From micky@NONONOmisc07@fmguy.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 18:42:15 2026
    From Newsgroup: alt.comp.os.windows-11

    In alt.comp.os.windows-11, on 17 Nov 2026 15:54:35 GMT, Mark Lloyd <nomail@here.invalid> wrote:

    On Mon, 16 Nov 2026 11:23:40 -0500, Paul wrote:

    [snip]

    Wow. Maybe they should warn people. What if I'd thrown the laptop in
    the trash!


    Uh, don't throw your laptop in the trash.
    Laptops have to be taken to a recycler :-)

    Once, a friend gave me a laptop found in a dumpster. There was nothing
    wrong with it except a missing power supply. I used one of those
    "universal" ones. I always do my own OS installation, but I did look at
    what was on there first. It included scans of the former owner's drivers >license and social security card.

    Could you send me copies of those? I have a friend from Nicaragua who
    needs a drivers license.

    [snip]
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From =?UTF-8?B?Li4ud8Khw7HCp8KxwqTDsQ==?=@winstonmvp@gmail.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 09:46:01 2026
    From Newsgroup: alt.comp.os.windows-11

    On 11/18/26 6:35 AM, J. P. Gilliver wrote:
    On 2026/11/16 19:17:19, ...w-i|#-o-#-n|# wrote:
    []
    Open the Zip file and copy or extract the 3 files to a folder of your
    choices.
    Select the BatteryInfoView.exe file, rt click, Properties, and unblock >>>> the file


    You're right; I never noticed that when I looked at
    batteryinfoview-x64.zip's properties as instructed by Winston. So I
    didn't tick it - and was still able to extract and run the utility.


    The recommendation(shown above) in my reply was to unblock the .exe
    file, not the zip.

    As mentioned, I didn't have to do this anyway. (I have seen the warning
    block about "this file came from the internet and might not be safe - do
    you want to use it anyway?" or similar wording; that didn't appear in
    this case, possibly due to it being via a .zip file?)
    []

    Because it was a zip file. Zip files are almost never tagged with a 'zone.identifier' tag(outside source - internet, email, media, etc.)
    - the extracted .exe file and the usually the other files in the zip
    file are the 'tagged' ones.
    --
    ...w-i|#-o-#-n|#
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From micky@NONONOmisc07@fmguy.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 18:47:38 2026
    From Newsgroup: alt.comp.os.windows-11

    In alt.comp.os.windows-11, on Tue, 17 Nov 2026 21:20:08 +0000, "J. P.
    Gilliver" <G6JPG@255soft.uk> wrote:

    On 2026/11/16 16:23:40, Paul wrote:
    On Mon, 11/16/2026 10:36 AM, micky wrote:
    In alt.comp.os.windows-11, on Mon, 16 Nov 2026 12:24:50 +0000, Andy
    Burns <usenet@andyburns.uk> wrote:
    []
    Magnets.

    The laptop uses a hall-effect sensor to detect if the lid is closed.

    Wow. Maybe they should warn people. What if I'd thrown the laptop in the >>> trash!
    []
    The question we want answered now, is when you get two
    smartphones stuck to one another with magnets, how do
    you get them separated ? Mini-crowbar ?

    Hall Effect sensors aren't exactly efficient. They use the Right-Hand Rule >> of Physics, with Field, Voltage, Current on three different axis. The sensitivity
    is controlled by the amount of current. We used to play with those in
    Physics lab. Field times Current is proportional to voltage. The ones in
    the lab ran at 150mA. Which is, relatively speaking, a lot of current.

    And would have a significant effect on battery life in a laptop.

    If you turned the current down to 2mA, you'd need quite a field to
    operate one. Part of using a Hall Probe, is building a constant current
    source to operate it. That's so the "gain" is fixed. the semiconductor

    I wasn't aware laptops used them to detect lid closed - I thought it was
    a switch in the hinge - but, if they do, it wouldn't have to be as
    sensitive as one for lab use - the manufacturer knows where they put the >magnet in the lid, so could use quite an insensitive (and thus
    low-current) sensor. (They wouldn't _want_ it to be too sensitive, lest
    what happened to micky happens!)

    I've been able 5 or 6 times to reproduce it sleeping when the phone is
    on the laptop, but that is out of 20 or more times I've tried. I can't
    tell why it does it sometimes and not others. One time at least, the
    top of the phone was to the right and down on the right edge of the
    laptop, and the phone was at about a 45^ angle. But other times that
    did nothing. I have a speaker at the top of the phone. Do they use
    magnets?
    []
    You would think there would be a hazard warning on the smartphone,
    regarding that magnet.
    []
    It's a good thing Andy knew that -- I don't have a SmartPhone and would
    have no idea there is a magnet in there. One more hazard...

    Paul

    I don't think there _is_ a magnet in most smartphones, though there is >something a magnet will happily cling to (the cell maybe?); however, if >you've bought one of those flat square magnets sold for sticking
    smartphones to things (like car dashboards), and forgotten you've left
    it stuck to the 'phone, the effect would be the same. and maybe some
    'phone _cases_ have a magnet in them for a similar purpose.

    My phone is supposed to do wireless charging but I haven't tried that.
    And I have a metal plate under the case to make it stick to a dashboard
    magnet. I think the metal plate would weaken the effect of the phone's
    wireless charging coil.

    Please use the Reply-To: rather than the From: email address.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 17:27:00 2026
    From Newsgroup: alt.comp.os.windows-11

    micky wrote:

    My phone is supposed to do wireless charging but I haven't tried that.
    And I have a metal plate under the case to make it stick to a dashboard magnet. I think the metal plate would weaken the effect of the phone's wireless charging coil.

    I had an older phone (Nexus4 I think) with a magnetic charging base in
    the car, bring the phone anywhere close and ... THUNK! it would be
    strongly attached, the only problem was when stationary the satnav would constantly flip around because the magnetometer was overwhelmed, once
    you were moving it knew from GPS changes which way it was really heading ...


    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Frank Slootweg@this@ddress.is.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Wed Nov 18 18:51:54 2026
    From Newsgroup: alt.comp.os.windows-11

    micky <NONONOmisc07@fmguy.com> wrote:
    [...]

    I've been able 5 or 6 times to reproduce it sleeping when the phone is
    on the laptop, but that is out of 20 or more times I've tried. I can't
    tell why it does it sometimes and not others. One time at least, the
    top of the phone was to the right and down on the right edge of the
    laptop, and the phone was at about a 45^ angle. But other times that
    did nothing. I have a speaker at the top of the phone. Do they use
    magnets?

    "at the top"? A speaker *in* the phone or a speaker box on top of the
    phone?

    If the latter: Is the pope catholic?

    So here we (might) have magnet number one.

    [...]

    My phone is supposed to do wireless charging but I haven't tried that.

    As has been explained wireless charging uses a magnet on the phone to
    align the phone to the wireless charging station.

    So here we have magnet number one/two.

    And I have a metal plate under the case to make it stick to a dashboard magnet. I think the metal plate would weaken the effect of the phone's wireless charging coil.

    The magnet in the car will magnetize the metal plate on the phone.

    So here we have magnet number two/three.

    Is that enough magnets for you (to trigger the lid-closure effect)?
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From JJ@jj4public@gmail.com to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 12:50:06 2026
    From Newsgroup: alt.comp.os.windows-11

    On Wed, 18 Nov 2026 09:46:01 -0700, ...wi+o#n+ wrote:

    Because it was a zip file. Zip files are almost never tagged with a 'zone.identifier' tag(outside source - internet, email, media, etc.)
    - the extracted .exe file and the usually the other files in the zip
    file are the 'tagged' ones.

    That got me wondering...

    AFAIK, only web browsers and network client applications which support that, will tag files as needed.

    But is there a way to manually tag a file from outside of those
    applications? e.g. from the Command Prompt.
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 02:42:48 2026
    From Newsgroup: alt.comp.os.windows-11

    On Thu, 11/19/2026 12:50 AM, JJ wrote:
    On Wed, 18 Nov 2026 09:46:01 -0700, ...w-i|#-o-#-n|# wrote:

    Because it was a zip file. Zip files are almost never tagged with a
    'zone.identifier' tag(outside source - internet, email, media, etc.)
    - the extracted .exe file and the usually the other files in the zip
    file are the 'tagged' ones.

    That got me wondering...

    AFAIK, only web browsers and network client applications which support that, will tag files as needed.

    But is there a way to manually tag a file from outside of those
    applications? e.g. from the Command Prompt.


    You should be able to do it, by making a two line Notepad, and saving to
    the Alternate Stream filename (includes the colon that is part of the full string).
    The system knows that the thing to the left is the file handle, and the thing to the right has something to do with an Attribute list. If using Notepad,
    save in ANSI mode. You would want to compare the size of your hand-crafted Alternate Stream, to the one the browsers are attaching. the FileOpen dialog
    in Notepad, doesn't seem to like this sort of syntax.

    $ notepad sp84711.exe:Zone.Identifier

    [ZoneTransfer]
    ZoneId=3

    The Streams.exe program can delete an Alternate Stream, but I
    don't see any mention of adding one.

    Not everything on the computer, accepts that syntax for an Alternate Stream. The command line actually works better, than FileOpen dialogs do.
    For example, I used this to get the hex editor to open it.
    And you may be able to use two echo statements to make this pattern.

    $ S:\HxD\HxD64.exe sp84711.exe:Zone.Identifier

    Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

    00000000 5B 5A 6F 6E 65 54 72 61 6E 73 66 65 72 5D 0D 0A [ZoneTransfer].. 00000010 5A 6F 6E 65 49 64 3D 33 0D 0A ZoneId=3..

    If you make something which is not what you wanted, then the Streams.exe
    can remove it (like if the Unblock dialog does not appear).

    Paul

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 08:27:21 2026
    From Newsgroup: alt.comp.os.windows-11

    JJ wrote:

    That got me wondering...

    AFAIK, only web browsers and network client applications which support that, will tag files as needed.

    But is there a way to manually tag a file from outside of those
    applications? e.g. from the Command Prompt.

    You can just use notepad ...

    notepad.exe c:\path\filename.ext:zone.identifier

    it'll ask if you want to create a new file, which you do (the alternate
    data stream counts as a separate file).

    paste in

    [ZoneTransfer]
    ZoneId=3]

    then save and exit notepad




    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 20:58:35 2026
    From Newsgroup: alt.comp.os.windows-11

    On 19/11/2026 12:20 am, J. P. Gilliver wrote:
    On 2026/11/18 8:56:54, Daniel70 wrote:
    On 18/11/2026 8:20 am, J. P. Gilliver wrote:
    []
    I don't think there _is_ a magnet in most smartphones,

    I do some Bar work at a local Services Club Bar .... and the Club
    President often leaves his Mobile Phone stuck to the side of the Cash
    Register .... you know, so he'd know where it is.

    So which has the magnet, the phone or the register??

    Seems I was wrong - the ones that allow contactless charging (which is
    most of them these days?) apparently do have one, to help align them
    with the charger.

    "contactless charging"?? Too Hi-Tech for me. When my Phone needs
    charging (say, less than 25%), I just connect it to a cord hanging out
    of a USB port on this computer. By the time I've finished doing my
    newsgroups, the phone IS 100%.

    But the Phone's USB Port is getting worn out so I might be on the way to buying one of those contactless charging thingees.
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 21:22:52 2026
    From Newsgroup: alt.comp.os.windows-11

    On 18/11/2026 4:38 pm, Paul wrote:

    <Snip>

    NTFS can handle Alternate Streams, FAT32 cannot.
    Was this because NTFS was the 'Unification' OS joining 'NT' and
    'FAT32'-type Systems?? roughly after NT4 and Win98/2000)
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 11:42:35 2026
    From Newsgroup: alt.comp.os.windows-11

    Daniel70 wrote:

    Paul wrote:

    NTFS can handle Alternate Streams, FAT32 cannot.
    Was this because NTFS was the 'Unification' OS joining 'NT' and 'FAT32'-
    type Systems?? roughly after NT4 and Win98/2000)

    Before then ... ADS was added to NTFS 1.1 (in NT3.5) I think to support
    apple resource forks when acting as a file-server.

    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 22:53:04 2026
    From Newsgroup: alt.comp.os.windows-11

    On 19/11/2026 10:42 pm, Andy Burns wrote:
    Daniel70 wrote:
    Paul wrote:

    NTFS can handle Alternate Streams, FAT32 cannot.
    Was this because NTFS was the 'Unification' OS joining 'NT' and
    'FAT32'- type Systems?? roughly after NT4 and Win98/2000)

    Before then ... ADS was added to NTFS 1.1 (in NT3.5) I think to
    support apple resource forks when acting as a file-server.

    O.K.
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Andy Burns@usenet@andyburns.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 12:04:00 2026
    From Newsgroup: alt.comp.os.windows-11

    Daniel70 wrote:

    Andy Burns wrote:
    ADS was added to NTFS 1.1 (in NT3.5) I think to
    support apple resource forks when acting as a file-server.

    O.K.
    I think I still have my copy of the Custer book, handed-out when we (as
    a VMS systems house) went down to look at NT running on DEC Alpha ...
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Paul@nospam@needed.invalid to alt.comp.os.windows-11,alt.comp.os.windows-10 on Thu Nov 19 09:36:08 2026
    From Newsgroup: alt.comp.os.windows-11

    On Thu, 11/19/2026 4:58 AM, Daniel70 wrote:
    On 19/11/2026 12:20 am, J. P. Gilliver wrote:
    On 2026/11/18 8:56:54, Daniel70 wrote:
    On 18/11/2026 8:20 am, J. P. Gilliver wrote:
    []
    I don't think there _is_ a magnet in most smartphones,

    I do some Bar work at a local Services Club Bar .... and the Club
    President often leaves his Mobile Phone stuck to the side of the Cash
    Register .... you know, so he'd know where it is.

    So which has the magnet, the phone or the register??

    Seems I was wrong - the ones that allow contactless charging (which is
    most of them these days?) apparently do have one, to help align them
    with the charger.

    "contactless charging"?? Too Hi-Tech for me. When my Phone needs charging (say, less than 25%), I just connect it to a cord hanging out of a USB port on this computer. By the time I've finished doing my newsgroups, the phone IS 100%.

    But the Phone's USB Port is getting worn out so I might be on
    the way to buying one of those contactless charging thingees.

    You should look in the Phone feature set, for what kind of
    charging features it has. Notice in the following description,
    a component must already be inside the phone for this to work.
    It's not generally a "retrofit circuit", although it could be
    if they put their minds to it. The reference to planar coils,
    means the coils for this are quite "flat". The coils are not
    toroidal cores adjacent to one another (which would be chubby
    and spoil the looks). Planar coils have been implemented using
    the copper sheets of a PCB board.

    https://en.wikipedia.org/wiki/Qi_%28standard%29

    Domain Inductive charging

    Design

    Devices that operate using the Qi standard rely
    on electromagnetic induction between planar coils.

    In other words, a distributed transformer. One coil is in the phone.
    One coil is in the charger base. When brought in close proximity,
    a high frequency driving current in the primary, is transformed
    to the secondary inside the phone, rectified and fed to the
    battery charging silicon. There is a gap between primary
    and secondary. Using a high frequency means the coil and transformer
    can be smaller.

    Qi charging, in the case of BEV cars, is about
    85% efficient, which means for charging a car, this is quite wasteful.
    Mains transformers with laminated cores and no big gaps,
    are quite a bit more efficient. It was proposed at one time,
    there would be a "charging spot in the paving" (which is the
    primary), and a self-driving car would figure out how to
    position itself so the secondary in the car lines up.
    Whether the secondary was supposed to descend from the bottom
    of the car, to reduce the gap, is a good question. While this
    was proposed for BEVs, there might not be any sample designs
    in the field (as it requires placing a charger in the paving,
    at some expense).

    In magnetics, you want the flux to be steered where it does
    the most good. This is partially a flux circuit as well,
    as you don't want the magnetic lines from the AC current flow,
    not being intercepted by the coils. For example, mu metal
    is good for making magnetic shield, because the lines of
    flux flow in the mu metal. Mu metal must be annealed to be
    effective, and a sharp "rap" on the table, spoils the
    shielding properties, requiring more annealing. A steel
    laminated core in a transformer, definitely isn't mu metal,
    but it does help keep the flux lines, where the designer
    wants them. Helping in transformer action and reducing
    heat loss (the laminated core prevents eddy currents from
    flowing from one lamination to the next).

    The reason Qi charging can be proposed for phones, is
    the efficiency loss, the amount of heat is manageable.
    You don't really want to be heating the phone battery
    too much (past the max temp of the pack inside). The charging
    power of 15W, 15/.85 is 17.6W, and that's 2.6 watts of heat.
    That's an estimate.

    That's to give some idea of what is involved.

    Paul
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Fri Nov 20 19:08:43 2026
    From Newsgroup: alt.comp.os.windows-11

    On 19/11/2026 11:04 pm, Andy Burns wrote:
    Daniel70 wrote:
    Andy Burns wrote:
    ADS was added to NTFS 1.1 (in NT3.5) I think to
    support apple resource forks when acting as a file-server.

    O.K.

    I think I still have my copy of the Custer book, handed-out when we (as
    a VMS systems house) went down to look at NT running on DEC Alpha ...

    I think I've still got my DOS 3.0 Disks somewhere .... but I don't have
    a 5.25 inch Drive to feed them into
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Sun Nov 22 20:53:00 2026
    From Newsgroup: alt.comp.os.windows-11

    On 20/11/2026 1:36 am, Paul wrote:
    On Thu, 11/19/2026 4:58 AM, Daniel70 wrote:
    On 19/11/2026 12:20 am, J. P. Gilliver wrote:
    On 2026/11/18 8:56:54, Daniel70 wrote:
    On 18/11/2026 8:20 am, J. P. Gilliver wrote:
    []
    I don't think there _is_ a magnet in most smartphones,

    I do some Bar work at a local Services Club Bar .... and the
    Club President often leaves his Mobile Phone stuck to the side
    of the Cash Register .... you know, so he'd know where it is.

    So which has the magnet, the phone or the register??

    Seems I was wrong - the ones that allow contactless charging
    (which is most of them these days?) apparently do have one, to
    help align them with the charger.

    "contactless charging"?? Too Hi-Tech for me. When my Phone needs
    charging (say, less than 25%), I just connect it to a cord hanging
    out of a USB port on this computer. By the time I've finished doing
    my newsgroups, the phone IS 100%.

    But the Phone's USB Port is getting worn out so I might be on the
    way to buying one of those contactless charging thingees.

    You should look in the Phone feature set, for what kind of charging
    features it has.

    The phone is an Aspera Jazz2 model

    https://technoyard.com/2019/11/14/aspera-jazz2-smart-phone/

    and looking at that page, I don't see any mention of "contactless charging".

    Maybe, when the recharge socket dies, I'll have to buy a new phone.

    Thanks.
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From J. P. Gilliver@G6JPG@255soft.uk to alt.comp.os.windows-11,alt.comp.os.windows-10 on Sun Nov 22 10:29:49 2026
    From Newsgroup: alt.comp.os.windows-11

    On 2026/11/22 9:53:0, Daniel70 wrote:
    []
    The phone is an Aspera Jazz2 model

    https://technoyard.com/2019/11/14/aspera-jazz2-smart-phone/

    and looking at that page, I don't see any mention of "contactless charging".

    That's a review, but Google's AI confirms that it doesn't support
    contactless charging. It also agrees with what I and others have said
    about a magnet - there will of course be one in the speaker, strong
    enough to attract paperclips, staples etc.; if there's a stronger one,
    it's probably in a case or similar.

    Maybe, when the recharge socket dies, I'll have to buy a new phone.

    Looks that way (or an external charger for the cell, as it's removable,
    but that's probably more bother than it's worth).

    Thanks.

    YW.
    --
    J. P. Gilliver. UMRA: 1960/<1985 MB++G()ALIS-Ch++(p)Ar++T+H+Sh0!:`)DNAf

    An Englishman, even if he is alone, forms an orderly queue of one.
    (George Mikes in "How to be an Alien".)
    --- Synchronet 3.22a-Linux NewsLink 1.2
  • From Daniel70@daniel47@nomail.afraid.org to alt.comp.os.windows-11,alt.comp.os.windows-10 on Sun Nov 22 23:25:24 2026
    From Newsgroup: alt.comp.os.windows-11

    On 22/11/2026 9:29 pm, J. P. Gilliver wrote:
    On 2026/11/22 9:53:0, Daniel70 wrote:
    []
    The phone is an Aspera Jazz2 model

    https://technoyard.com/2019/11/14/aspera-jazz2-smart-phone/

    and looking at that page, I don't see any mention of "contactless charging".

    That's a review, but Google's AI confirms that it doesn't support
    contactless charging. It also agrees with what I and others have said
    about a magnet - there will of course be one in the speaker, strong
    enough to attract paperclips, staples etc.; if there's a stronger one,
    it's probably in a case or similar.

    Maybe, when the recharge socket dies, I'll have to buy a new phone.

    Looks that way (or an external charger for the cell, as it's removable,
    but that's probably more bother than it's worth).

    Yeap.
    --
    Daniel70
    --- Synchronet 3.22a-Linux NewsLink 1.2