• Renegade v1.44/DOS/Win32/Linux

    From T.J. Mcmillen@1:129/305 to All on Wed Nov 11 21:49:07 2026
    Coming soon. Here is a whatdone list since v1.40/DOS was released.

    |08 11/09/2026 |11Updates since v1.40/DOS was released.

    |01 ============================================================================ |15 U - Updated A - Added F - Fixed
    |01 ============================================================================ |07


    U. Updated Menu Editor to allow COPY of full menus and also commands
    within the menu.

    U. Updated Menu Editor to allow deletion of menus that have commands
    within the menu.

    A. Added to the Menu Editor, the ability to import all Y2K and previous
    .MNU files and import them into the MENUS.DAT file. Now you can
    use any old "drop in" .MNU files from years past fairly easily.

    The .MNU will be updated to the current records the best as possible,
    but some may need changed, as Renegade has changed over the years.
    Any references to old Menu Names will need changed to the Menu Num.
    but the importer will try it's best to correct this on import.

    This command is Y in the Menu Editor for "Import Y2K and Older .MNU"
    files.

    F. MCI Codes % A1 - % A4 were commented out in the source at one point.
    These are for the High/Low of the Message & File Areas. These are
    now restored and work again.

    U. When logging on NEW, a User cannot enter their REAL NAME as something
    obviously fake such as "Joe 7" or "First Name and Last Inital" Only. A
    Real name checked to make sure it meets certain guidelines as to what
    a real name is. I got tired of people logging in and making up random
    numbers or letters for a name, so this check is now in place.

    A. Added a lightbar nodelist browser. New MENUCMD Key of N+ to load
    this. A File named NODELIST.DAT needs to reside in your \RENEGADE\DATA
    directory to read from. The format is as follows:

    Name of Network
    Path to Nodelist file
    - With extension of .### (to only allow reading of numbers)

    -NODELIST.DAT File Contents-

    FIDONET
    X:\NODELIST\NODELIST.###
    METRONET
    X:\NODELIST\METLIST.###

    Renegade WILL create this for you if it does not exist.

    U. Corrected File Lightbar listings to not show the cursor, and some
    minor code improvement on the listings itself when scrolling
    backwards through the list.

    U. File Lightbar footer no longer uses the rglng.txt strings. It
    now uses the same FILEP menu prompt as the non lightbar file listing
    uses. Make sure to update your FILEP.ANS/.ASC file to display any
    commands you would like listed to the Lightbar File listing prompt.

    U. Ported code over to Free Pascal. Renegade can now be compiled for
    Win32/64 and Linux.

    F. %XYxx,yy% MCI code now prints on the correct line with the status
    bar ON locally. This worked fine with the status bar OFF and
    remotely, but with the status bar on locally, it did not. This has
    now been fixed.

    F. File Listing lightbar no correctly displays the full FILE_ID.DIZ
    when moving up and down pages without cut offs.

    U. ANSI/TEXT archive viewer has now been updated and works cleaner.

    F. Corrected a bunch of bugs in the Multinode Chat area.

    U. When sending Netmail, once an address that is listed in the nodelist
    or nodelists from NODELIST.DAT, the full BBS, SysOp, Location will
    be pulled and displayed.

    U. Removed all File Lightbar Strings (last 3 in rglng), and replaced
    it with these Netmail Question Texts. Updated RGLNG.EXE as well
    to account for this change.

    $NETMAIL_TEXT
    Enter network address (Z:N/N.P format) or SysOp/BBS name.
    $

    $NETMAIL_TEXT_2
    Tip: Enter Z:N/? to list every node in a net, (ex: 1:129/?).
    $

    $NETMAIL_TEXT_3
    Address/Text: @
    $

    A. Created RGMAINT to follow along with Renegade. This will purge
    deleted users, the repack the user file, sort files, pack message
    and email areas as well as fix onliner.dat errors.

    F. Fixed Oneliner editor and Onliner to not assign a random person if
    the userbase gets packed. It will also post ANONYMOUS if a user
    was deleted for the Oneliner.

    U. Menu Editor selection is now lightbar driven and scrolls. Its a
    bit easier to find your menu instead of hitting page by page.

    U. BBS Listing is now lightbar driven as well, and ENTER will show
    BBS.SCR file (for extended listing), and you can add from the
    BBS Listing page now as well instead of a seperate command.

    F. Updated most editors for a bug that went long undetected. If you
    created a new protocol, or message base, or file base, etc. and then
    went to edit it, it would not save your changes. This has now been
    corrected in all editors.

    F. Timedout Logoff was broken in multiple places. This is now been
    fixes throughout the code.

    A. Lightbars added throughout the code on every editor. Makes it a
    bit easier use the editors. Command keys still work, if you
    don't want to use the lightbars, just use the command keys as
    you normally do.

    System Config - Option R - Turn System Toggles Lightbars ON/OFF

    A. Simple way of adding Lightbars to any/all menus. Create a blank
    file in your \RENEGADE\MISC directory of MENUNAME.LBM and it will
    create a lightbar setup to track every hot key on the MENUNAME.ANS
    screen. The "hot key" needs to be in CAPS for this to work.

    Option in the MENU Editor to make these for each or some ANSI's.

    Also, a second way is to have block of area set for menu commands
    and Renegade will take what you put into the menu command name
    and place it in the placeholder on the ANSI.

    Read UPGRADE.DOC for more info in new release.

    A. INDEXED File and Message Listings are now working. Command keys
    FI = File Index, MI = Message Index

    A. Added MENU2DAT Util internal to Renegade. You can now export your
    Menu(s) to a directory and work on them in any editor you like.
    Then R to IMPORT the menu back into your MENUS.DAT. The MENUS.DAT
    will be backed up before hand, but always back up your DATA
    before you do something like this.

    A. Added Renegade Programming Language like Telegard and Mystic have.
    You are also able to convert Mystic MPL programs to Renegade RGL
    programs and use them, such as MRC, or Double-Up Game, etc.

    New Option -X Runs .RGX (RGL Compiled scripts)

    A. New ANSI/ASCII Files created. NODEON, AND NODEOFF will now
    display for 5 seconds or until a key is pressed showing that a
    user has logged on or off to all other nodes.

    You can use the following MCI codes within the NODEON or
    NODEOFF files:

    % UN: Name
    % ND: Node
    % LO: City and State
    % TI: Time
    % UC: Calls today
    % UA: Age

    A. Added QWKe QWK Packets. So you will now get the best of both
    worlds. QWK readers will still see the old way, and newer QWKE
    readers will get the enhanced packets.


    A. RGZ-Modem has been added to internal protocols. Z, Y, Y-Modem-G
    X, and X Modem 1k are now all internal to Renegade. You can still
    use External protocols if you want. When inserting a new protocol
    you will be asked if it is INTERNAL or EXTERNAL. If the
    protocol.dat is erased, it will default with a new one with all
    internal protocols already added.

    A. Added Long File Name support with secondary 8.3 translation if
    needed.

    ... Come on Mr. Krinkle tell me why...

    --- Renegade v1.44/DOS
    * Origin: The Titantic BBS Telnet - ttb.rgbbs.info (1:129/305)