Sysop: | Amessyroom |
---|---|
Location: | Fayetteville, NC |
Users: | 25 |
Nodes: | 6 (0 / 6) |
Uptime: | 28:04:23 |
Calls: | 491 |
Files: | 1,078 |
Messages: | 67,011 |
On 04-20-20 21:16, Nightfox wrote to All <=-
@VIA: DIGDIST
Hi all - I just want to make sure my BBS is set up correctly on
StarNet. I just fixed my conference numbers and set my scan pointers back, but when I polled the hub, the only area I got a message in is
the Lord of the Rings area. Are there messages in the other areas?
Also, after I reset my scan pointers for StarNet, I turned off scanning
of the other available networks. However, when I did a poll, I got the following errors, which looks like I'm still getting packets for
message areas I don't have set up from the hub:
Hi all - I just want to make sure my BBS is set up correctly on
StarNet. I just fixed my conference numbers and set my scan
pointers back, but when I polled the hub, the only area I got a
message in is the Lord of the Rings area. Are there messages in the
other areas?
This appeared in DeveloperNet. :)
On 04-22-20 14:09, Nightfox wrote to Vk3jed <=-
This appeared in DeveloperNet. :)
Weird, as I posted it on StarNet from my BBS, and that's where my
message is on my BBS.. I did get one reply on my BBS that came up in DeveloperNet Announcements. I'm not sure where the mixup might be. I checked my message area configuration on my BBS, and the internal messagebase codes are different..
Weird, as I posted it on StarNet from my BBS, and that's where my
message is on my BBS.. I did get one reply on my BBS that came up
in DeveloperNet Announcements. I'm not sure where the mixup might
be. I checked my message area configuration on my BBS, and the
internal messagebase codes are different..
And the QWK conference numbers are correct for the hub you're posting to?
On 04-22-20 19:49, Nightfox wrote to Vk3jed <=-
@VIA: DIGDIST
Re: Re: Testing
By: Vk3jed to Nightfox on Thu Apr 23 2020 11:25 am
Weird, as I posted it on StarNet from my BBS, and that's where my
message is on my BBS.. I did get one reply on my BBS that came up
in DeveloperNet Announcements. I'm not sure where the mixup might
be. I checked my message area configuration on my BBS, and the
internal messagebase codes are different..
And the QWK conference numbers are correct for the hub you're posting to?
Yes, as far as I know. I downloaded the latest info pack for StarNet
and set up the conference numbers with the hub according to the info
pack. The conference numbers are only applicable on the hub (the conference numbers on my BBS are irrelevant), and StarNet's conference numbers are in the 8000 range.
I suppose it may be possible that the hub also carries DeveloperNet and has some duplicate conference numbers, but I have no way to check if that's the case.