From Newsgroup: rec.sport.rowing

<div>It also works.My problem is when I install on my ubuntu 18.04 LTSIDE like for eg. Eric Python or VISUAL STUDIO etc.Under python2 or python3 I get same error and can not load tkinterModuleNotFoundError: No module named 'Tkinter'</div><div></div><div></div><div></div><div>tkinter visual studio download</div><div></div><div>DOWNLOAD ->>->>->> https://t.co/oBdQL0Wr5q</div><div></div><div></div><div></div><div></div><div></div><div></div><div>As of update 2.0.0, all snippets have another form where you add the at- prefix. This pefix assumes you have used "import tkinter as tk" rather than "from tkinter import *" and adds tk. before every call to the tkinter module.</div><div></div><div></div><div>I am thinking about writing a small little program with a GUI that should work in both linux and windows. For this my plan is to use python and tkinter and I've installed eclipse and pydev. But I've failed to even import tkinter in my program!</div><div></div><div></div><div>To install Tkinter, we need Python pre-installed. Tkinter actually comes along when we install Python. While installing Python, we need to check the td/tk and IDLE checkbox. This will install the tkinter and we need not install it separately.</div><div></div><div></div><div>I want use mayapy to batch handle some works in background. So that I dont have to open maya at the very beginning. But I need an UI to input some variable. I install python27 on my computer. I can use the tkinter module in python. But I cant inport it in mayapy. There always be an error:</div><div></div><div></div><div>Where you can create input fields,labels,buttons,checkboxes,radiobox,listbox and messages of your application by drag and drop.You can also customize any of them to the color and look you want.After that, you can download the complete python code of the visual.</div><div></div><div></div><div></div><div></div><div></div><div></div><div>You may find that when you try to import tkinter that you get an error. Sometimes it will tell you that you need to install another package. If so, follow the instructions, and try again. It may also just give you Python's standard error message: "ModuleNotFoundError: No module named 'tkinter'".</div><div></div><div></div><div>Make sure to verify your install (see below).Didn't work? There may have been an error compiling Python's tkinter code. To check, from the main Pythonsource directory, try touch Modules/_tkinter.c (note the underscore) and then make to recompile it.Watch closely for error messages.</div><div></div><div></div><div>If it gives you an error when you try to import tkinter (e.g., "If this fails your Python may not be configured for Tk"),something hasn't been set up correctly. If you compiled Python yourself, see above to check for compile errors.</div><div></div><div></div><div>With CustomTkinter you can create modern looking userinterfaces in python with tkinter. CustomTkinter is atkinter extension which provides extra ui-elements likethe CTkButton, which can be used like a normal tkinter.Button,but can be customized with a border and round edges.</div><div></div><div></div><div>If you dont specify any colors, customtkinter uses the standard blue color in the light theme.You can change the color theme to dark by callingcustomtkinter.set_appearance_mode("Dark").If you specify custom colors for CustomTkinter elements, the you can either use atuple in the form: (light_color, dark_color). Or you can set a single colorwhich will be used in light and dark theme.</div><div></div><div></div><div>Here I used the customtkinter.enable_macos_darkmode() command toenable the macOS darkmode, and used multpiple CTkFrames. It has somekind of a menu on the left side, and I used all CustomTkinter elementsthere are at the moment.Maybe this is a good reference if you want tocreate your own application with this library.(Code: /complex_example.py)</div><div></div><div></div><div>I've been trying to make this in python with tkinter but I think I've come to the realization that I'm not very good at python and it's been extremely frustrating. I've held off on using matlab or something of that nature because I'm using quite a few libraries (oneWire, dallasTemp, and pid) that I'd have to port over and I'm not entirely sure how to do that.</div><div></div><div></div><div>Using Python and Bottle it will also be necessary to learn HTML and probably some CSS and some Javascript. I'm not sure how to balance that amount of learning against persevering with TKInter. I was already reasonably familiar with HTML and CSS (but by no means an expert) when I started using Bottle. IMHO learning HTML and CSS is well worthwhile because CSS gives you so much flexibility with the visual appearance without having to re-write any of the Python code or the HTML.</div><div></div><div></div><div>If you are using macOS 12 Monterey or later,you may see problems with file open and save dialogswhen using IDLE or other tkinter-based applications.The most recent versions of python.org installers(for 3.10.0 and 3.9.8) have patched versionsof Tk to avoid these problems. They should be fixedin an upcoming Tk 8.6.12 release.</div><div></div><div></div><div>If you are using a Python from any current python.orgPython installer for macOS (3.10.0+ or 3.9.0+),no further action is needed to use IDLE or tkinter.A built-in version of Tcl/Tk 8.6 will be used.</div><div></div><div></div><div>Python's integrated development environment,IDLE, and thetkinter GUI toolkitit uses, depend on the Tk GUI toolkit which isnot part of Python itself. For best results, it is important that theproper release of Tcl/Tk is installed on your machine.For recent Python installers for macOS downloadable from this website,here is a summary of current recommendations followed by more detailedinformation.</div><div></div><div></div><div>ActiveState provides binary distributions of Tcl/Tk which are upward compatiblewith and generally more up-to-date than those provided by Apple in macOSreleases. This version of Tcl/Tk includes fixes for some critical problemsthat you may encounter using tkinter or IDLE (see Apple 8.5.9 below).You can download an installer for this release fromthe ActiveState web site.Note that ActiveState Community Edition binaries are not open source andare covered by an ActiveState license. You should read the licensebefore downloading to verify that your usage complies with its terms of use.As of Python 3.7.0, 3.6.8, and 2.7.16, no current Python installers for macOSdownloadable from python.org make use of this or any other external versionof Tcl/Tk.</div><div></div><div></div><div>The Python 64-bit/32-bit macOS installers for Python 3.6.x andand 2.7.x dynamically link to Tcl/Tk 8.5 frameworks.The dynamically linking occurs when tkinter (Python 3)or Tkinter (Python 2) is first imported (specifically, the internal_tkinter C extension module). By default, the macOS dynamic linkerlooks first in /Library/Frameworks for Tcl and Tk frameworks withthe proper major version. This is the standard location for third-partyor built from source frameworks, including the ActiveTcl releases.If frameworks of the proper major version are not found there,the dynamic linker looks for the same version in/System/Library/Frameworks, the location for Apple-suppliedframeworks shipped with macOS. (Note, you should normally not modifyor delete files in /System/Library.)</div><div></div><div></div><div>As in our previous tutorials, we have covered how to create tkinter buttons, tkinter labels, tkinter entry, tkinter frames and tkinter checkbuttons, and many more. Now with the help of all the widgets discussed in previous sections, we are going to create a Calculator App using Tkinter.</div><div></div><div> df19127ead</div>
--- Synchronet 3.21a-Linux NewsLink 1.2