• Re: Ground anchor - use in wall?

    From fred@not@for.mail to uk.d-i-y on Sat Oct 4 21:39:52 2025
    From Newsgroup: uk.d-i-y

    John Rumm <see.my.signature@nowhere.null> wrote in news:10bdkj2$2tc4n$1@dont-email.me:

    On 28/09/2025 17:09, David wrote:

    My security chain set up for locking my bicycle on car/motor home
    racks came with a ground anchor.

    Around the outside of the house is block paved, bedded on sand and
    separated by sand, so anchoring anything to that would be pointless.

    I am wondering how effective it would be to bolt it into a red brick
    wall. Not the same as bolted into solid concrete but perhaps better
    than nothing.

    You can get a decent fixing in brick. If the bricks are soft, then
    using a resin anchor[1] will give a good fixing. However keep in mind
    that any metal fixing will not last long against a cordless angle
    grinder.

    [1] I normally use M12 threaded bar, into a 14mm hole. Then 2 to 3
    pumps from a mastic gun with something like Fischer VL300 Resin. If it
    is a solid brick wall (i.e. no cavity) then you can go deeper into
    both leaves (and 4 to 5 pumps of resin).

    E.g. mounting uprights for handrails:

    https://wiki.diyfaq.org.uk/index.php?title=Ornate_wrought_iron_handrail s#Fixing_the_uprights


    Seconded on all counts plus:

    1. Go deep: If your security anchor is worthy, drill through to the
    internal bricks in a cavity wall, resin secured all the way through.

    2. Use shear nuts to secure the plate to the studs.

    Additionally:

    3. I would never leave a decent bike or motorbike in a visible location,
    even at the rear of a property, it will just go.

    4. For a bike I would build or buy a shelter in which it would be
    secured. Outer loudly alarmed if it was a dodgy area. I am in favour of 'shelled'/'onion' security, light on the outside but alarmed with heavy
    inside to delay removal under painfully noisy ear action.

    Being aware that:

    5. Locking a bike does not stop the theft of ancillaries. I advised a
    mate to securely lock his nice MTB in his locked shed. He later found his
    bare frame still securely locked in place and later he observed a chav
    down the street going around on a recently upgraded ride bearing highly similar but untraceable new components.

    Additionally:

    6. In a similar situation I have cast a chain into a concrete block of
    about 600 x 600 x 800 and placed it in a shed to secure a decent bike.

    7. My bikes are pretty well secured even when inside my home.
    --- Synchronet 3.21a-Linux NewsLink 1.2