From Newsgroup: rec.sport.rowing

<div>If you are using Python on Windows for web development, we recommend a different set up for your development environment. Rather than installing directly on Windows, we recommend installing and using Python via the Windows Subsystem for Linux. For help, see: Get started using Python for web development on Windows. If you're interested in automating common tasks on your operating system, see our guide: Get started using Python on Windows for scripting and automation. For some advanced scenarios (like needing to access/modify Python's installed files, make copies of binaries, or use Python DLLs directly), you may want to consider downloading a specific Python release directly from python.org or consider installing an alternative, such as Anaconda, Jython, PyPy, WinPython, IronPython, etc. We only recommend this if you are a more advanced Python programmer with a specific reason for choosing an alternative implementation.</div><div></div><div></div><div>VS Code also contains a built-in terminal that enables you to open a Python command line with Windows Command prompt, PowerShell, or whatever you prefer, establishing a seamless workflow between your code editor and command line.</div><div></div><div></div><div></div><div></div><div></div><div>how to download python on windows terminal</div><div></div><div>Download Zip: https://t.co/s9LMXCZtuD </div><div></div><div></div><div>To open the terminal in VS Code, select View > Terminal, or alternatively use the shortcut Ctrl+` (using the backtick character). The default terminal is PowerShell.</div><div></div><div></div><div>With your PowerShell command line open, enter python to run the Python 3 interpreter. (Some instructions prefer to use the command py or python3, these should also work). You will know that you're successful because a >>> prompt with three greater-than symbols will display.</div><div></div><div></div><div>But really large Python programs with a lot of complexity are written in files with a .py extension, typically called Python scripts. Then you execute them from the terminal using the Python command.</div><div></div><div></div><div>Adding the Python path to the PATH variable alleviates the need to use the full path to access the Python program in the command line. It instructs Windows to review all the folders added to the PATH environment variable and to look for the python.exe program in those folders.</div><div></div><div></div><div>The system environment path points to the python directory in C drive and cannot be changed (due to lack of admin rights), but the user enviroment variables are set to the python directory in D drive.</div><div></div><div></div><div>Does a decent job for me. Just change the first two lines in the PATH variable to your Python directory and the Python Scripts directory. The CMD which will open using this bat will be ready to run the newer version of python executable.</div><div></div><div></div><div>The problem is your python path might be old one in either user variable or system variable.Ascertain the version you want it is the same in both.e.g. in user variables path hasC:\Users\452209\Python3.8\Scripts</div><div></div><div>C:\Users\452209\Python3.8\</div><div></div><div></div><div></div><div></div><div></div><div></div><div>You can also check the version of Python by opening the IDLE application. Go to Start and enter python in the search bar and then click the IDLE app, for example IDLE (Python 3.10 64-bit).</div><div></div><div></div><div>We all know that nowadays Python is one of the most popular coding languages among all. While installing Python, one IDE named IDLE is also installed. Using the IDLE we can write and also run our programs. But we can also run python programs on CMD or command prompt as CMD is the default command-line interpreter on Windows.</div><div></div><div></div><div>Step 1: For setting up Python on CMD we must check whether Python is installed on your machine or not. For doing this go to the Windows search bar and search for python. If you find python in the result then you are good to go.</div><div></div><div></div><div>The terminal, a love-hate relationship with the developers. Whether you love to use the terminal(me) or you hate it, you (probably)have spent a significant amount of time looking at the plain black and white text of the terminal(not applicable for the new windows terminal though ?). From time to time, the terminal has evolved to cope up with the needs of a developer.</div><div></div><div></div><div>And showing colored text in the terminal is probably a useful(if not cool) feature ever added. Today, I'll demonstrate how you can output colored text in the terminal using Python with the help of Colorama</div><div></div><div></div><div>Visual Studio Code includes a full featured integrated terminal that starts at the root of your workspace. It provides integration with the editor to support features like links and error detection. The integrated terminal can run commands such as mkdir and git just like a standalone terminal.</div><div></div><div></div><div>Remove terminal instances by hovering a tab and selecting the Trash Can button, selecting a tab item and pressing Delete, using Terminal: Kill the Active Terminal Instance command, or via the right-click context menu.</div><div></div><div></div><div>Icons may appear to the right of the terminal title on the tab label when a terminal's status changes. Some examples are a bell (macOS) and for tasks, displaying a check mark when there are no errors and an X otherwise. Hover the icon to read status information, which may contain actions.</div><div></div><div></div><div>You can open terminals in the editor area (terminal editors) with the Terminal: Create New Terminal in Editor Area command, the Terminal: Create New Terminal in Editor Area to the Side command, or by dragging a terminal from the terminal view into the editor area. Terminal editors are presented like regular editor tabs:</div><div></div><div></div><div>The content in the terminal is called the buffer, with the section right above the bottom viewport being called "scrollback". The amount of scrollback kept is determined by the terminal.integrated.scrollback setting and defaults to 1000 lines.</div><div></div><div></div><div>The terminal features sophisticated link detection with editor integration and even extension contributed link handlers. Hover over a link to display an underline, then hold the Ctrl/Cmd key and click.</div><div></div><div></div><div>Word links: Fallback link type that uses the terminal.integrated.wordSeparators setting. The setting defines word boundaries and make nearly all text into words. Activating a word link searches the workspace for the word. If there is a single result it will open, otherwise it will present the search results. Word links are considered "low confidence" and will not show an underline or tooltip unless you hold the Ctrl/Cmd key. They also have limited support for line and column suffixes.</div><div></div><div></div><div>By default, there is a warning when pasting multiple lines, which can be disabled with the terminal.integrated.enableMultiLinePasteWarning setting. This is only done when the shell does not support "bracketed paste mode". When that mode is enabled, the shell is indicating that it can handle multiple line pasting.</div><div></div><div></div><div>Alt and left-click will reposition the cursor to underneath the mouse. This works by simulating arrow keystrokes, which may not work reliably for some shells or programs. This feature can be disabled with the terminal.integrated.altClickMovesCursor setting.</div><div></div><div></div><div>When applications running in the terminal turn on mouse events mode, such as Vim mouse mode, mouse interaction is sent to the application instead of the terminal. This means that clicking and dragging will no longer create a selection. Terminal selection can be forced by holding the Alt key on Windows and Linux, this can also be done with the Option key on macOS but requires enabling the terminal.integrated.macOptionClickForcesSelection setting first.</div><div></div><div></div><div>The terminal view can be maximized by clicking the maximize panel size button with the upwards chevron icon. This will temporarily hide the editors and maximize the panel. This is useful to temporarily focus on a large amount of output. Some developers use VS Code as a standalone terminal by opening a new window, maximizing the panel, and hiding the side bar.</div><div></div><div></div><div>The Tasks feature can be used to automate the launching of terminals, for example, the following .vscode/tasks.json file will launch a Command Prompt and PowerShell terminal in a single terminal group when the window starts:</div><div></div><div></div><div>Split terminals on Windows will start in the directory that the parent terminal started with. On macOS and Linux, split terminals will inherit the current working directory of the parent terminal. This behavior can be changed using the terminal.integrated.splitCwd setting:</div><div></div><div></div><div>The Terminal: Set Fixed Dimensions command allows changing the number of columns and rows that the terminal and it's backing pseudoterminal uses. This will add scroll bars when necessary, which may lead to an unpleasant UX and is generally not recommended, but it is a common ask on Windows in particular for reading logs or long lines when paging tools aren't available.</div><div></div><div></div><div>The integrated terminal shell is running with the permissions of VS Code. If you need to run a shell command with elevated (administrator) or different permissions, use platform utilities such as runas.exe within a terminal.</div><div></div><div></div><div>To resolve this issue, you need to track down where the old npm is installed and remove both it and its out-of-date node_modules. Find the nvm initialization script and run which npm before it runs, which should print the path when you launch a new terminal.</div><div></div><div></div><div>By default, the integrated terminal will render using GPU acceleration on most machines. Typically when there are rendering problems it's an issue of something in your hardware/OS/drivers not playing nicely with the GPU renderer. The first thing to try is to disable GPU acceleration, trading off rendering speed for DOM-based rendering, which is more reliable:</div><div></div><div></div><div>This normally means that the program/shell running inside the terminal requested to turn on "bracketed paste mode" but something doesn't support it properly. To work around this, you could run printf "\e[?2004l" to disable it for that session or add the following to your /.inputrc file:</div><div></div><div></div><div>I have a situation where I have a cloned environment (arcgispro-py3-clone) and 'conda activate' is not successful within VS code. I would like to run my python toolbox and VS code being able to ID that i am in my (arcgispro-py3-clone) environment.</div><div></div><div> df19127ead</div>
--- Synchronet 3.21a-Linux NewsLink 1.2