Blue Origin unveils New Glenn GS3 third stage and Northstar booster engine

Date:
Thu, 05 Nov 2026 20:51:14 +0000

Description:
Blue Origin chief executive Dave Limp has unveiled a third stage for New
Glenn and The post Blue Origin unveils New Glenn GS3 third stage and
Northstar booster engine appeared first on NASASpaceFlight.com .

FULL STORY ======================================================================

Blue Origin chief executive Dave Limp has unveiled a third stage for New
Glenn and a new booster engine, expanding the rockets reach into high-energy orbits and deepening the companys American-made propulsion line-up.

The third stage, GS3, is aimed at direct injection to geostationary orbit (GEO) and Earth-escape trajectories. Alongside it, Blue Origin introduced Northstar, a liquid oxygen and liquefied natural gas (LOX/LNG) booster engine rated at 715,000 pounds of thrust.



New Glenn has already flown as a two-stage vehicle from Launch Complex 36 at Cape Canaveral, including its NG-1 debut with the Blue Ring Pathfinder, the NG-2 ESCAPADE mission for NASA, and AST SpaceMobile satellites on NG-3. See Also LC-36 Rebuild Updates Blue Origin Section NSF Store Click Here to Join
L2

NG-4 was destroyed in the pad explosion during a static fire attempt in May. However, thanks to an impressive pad repair effort , Blue Origin is already preparing to return to flight with NG-4.1, with booster Never Tell Me The Odds, early in 2027.

The company has been promoting an ambitious forward schedule for 2027 and beyond, with an increasing launch cadence, plus another launch pad ( LC-36B ) and a new rocket variant.

Now, with the official news relating to GS3, New Glenn adds a high-energy option on both the current 72 architecture and the larger 94 variant Blue Origin outlined previously.

See NSFs December 2025 New Glenn upgrades and Blue Moon coverage, and the Cape campus ramp-up report. GS3 opens direct GEO and deep space

Blue Origin says GS3 covers high-energy missions the two-stage stack is not intended to handle in the same way, including direct GEO injection and Earth-escape paths.

On the 72 vehicle, the company quotes up to 8 metric tonnes to GEO and 10 metric tonnes to trans-lunar injection (TLI). On the 94 vehicle, those
figures rise to 14 metric tonnes to GEO and 20 metric tonnes to TLI. Artists impression of GS3 after GS2 separation, with its BE-7 engine firing and a payload attached. Credit: Blue Origin

GS3 is already under contract for a cis-lunar mission with a government customer, scheduled to launch in 2028. Blue Origin did not name the customer in the materials provided for this report.

The stage is not required for Blue Origins lunar lander architecture, but the company says it can support sustained operations around the Moon. More mass delivered straight to TLI would allow faster transit while leaving propellant available for on-orbit work.

See NSFs Blue Moon and Mars mission update for the lander side of that architecture. Same fairing, new high-energy toolkit

GS3 builds on existing New Glenn hardware and is meant to leave the customer payload experience unchanged. It uses the same fixed payload adapters and payload fairing as the two-stage vehicle.

Integrated inside an interstage, the third stage preserves the full fairing volume for spacecraft. New Glenn 9X4 Third Stage and fairing Credit: Blue Origin

Mission options listed for GS3 include direct insertion into medium Earth orbit (MEO) and GEO, multi-payload deployment, extended coast phases, and multiple precision burns.

Blue Origin says those features target national security and other
high-energy missions that need precise orbital insertion and tight mission assurance.

BE-7 at the core, composites on the tank

GS3 is powered by Blue Origins BE-7 engine, the same LOX/LH2 family already tied to the companys Blue Moon landers. For GS3 mission profiles, Blue Origin quotes vacuum specific impulse better than 460 seconds.

The stage also reuses New Glenn fluids, mechanical systems, and avionics, which the company presents as a way to cut technical risk. Tank test at
Launch Site One Credit: Blue Origin

At Launch Site One in Texas, teams have completed a first composite liquid hydrogen (LH2) tanking test for the stage.

Using flight fluid systems, the tank was pressurised to 100 percent of
Maximum Expected Operating Pressure (MEOP) for 2.5 hours, longer than Blue Origin says any GS3 mission requires.

The same tank was also pressurised to 150 percent of MEOP for 10 minutes.
Blue Origin expects the GS3 tank to be the first composite LH2 tank flown in space.

Northstar: more thrust, less mass

In the same unveiling, Blue Origin introduced Northstar, a new LOX/LNG
booster engine producing 715,000 pounds of thrust. It becomes the companys second booster engine alongside BE-4, which powers New Glenns first stage and ULAs Vulcan.

Blue Origin says more than 65 percent of Northstar is produced through additive manufacturing. Compared with BE-4, the company claims a 30 percent mass reduction and a 50 percent cut in parts count, while thrust rises from 640,000 to 715,000 pounds-force. Northstar Engine Credit: Blue Origin

Manufacturing changes have also shortened production timelines. Final
assembly is now described as taking less than a day.

The programme moved from approval to development testing in 11 months. Northstar keeps the liquefied natural gas-fuelled, oxygen-rich staged combustion cycle and single-shaft turbopump architecture used on BE-4.

What it means for New Glenn

GS3 and Northstar point to a New Glenn family that is no longer only a two-stage LEO and GTO workhorse. Direct GEO, multi-burn high-energy profiles and a booked 2028 cis-lunar flight give GS3 a clear near-term role, while Northstar adds a higher-thrust, lighter booster path beside the flying BE-4 fleet. Northstar render Credit: Blue Origin

Blue Origin still has to turn the tanking milestones and engine development testing into flight hardware.

For now, the company is putting hard numbers on paper: up to 14 tonnes to GEO and 20 tonnes to TLI on 94 with GS3, a government cis-lunar launch in 2028, BE-7 Isp above 460 seconds on the third stage, and a 715,000 lbf Northstar engine.

Blue Origin also noted that manufacturing advancements have significantly shortened production timelines, enabling assembly in less than a day.

(Featured Image: The New Glenn Launch Vehicle Family Credit: Blue Origin)

The post Blue Origin unveils New Glenn GS3 third stage and Northstar booster engine appeared first on NASASpaceFlight.com .



======================================================================
Link to news story: https://www.nasaspaceflight.com/2026/11/blue-origin-new-glenn-gs3-northstar-en gine/

--- Mystic BBS v1.12 A48 (Windows/64)
* Origin: Mystic Hobbies BBS mystic-hobbies.com (954:895/2)